LA-7 Lavochkin - CY Model - 2450mm - Moki S 180 - MSG Stiftland - Markus

  Рет қаралды 22,357

RC PLANE VIDEOS

RC PLANE VIDEOS

Күн бұрын

Пікірлер: 26
@johnkinnane547
@johnkinnane547 6 жыл бұрын
What a fantastic sound and lovely scale weathering details on her, really nice plane, John
@RCPLANEVIDEOS
@RCPLANEVIDEOS 6 жыл бұрын
many many thanks :-)
@michaelbartelt3221
@michaelbartelt3221 2 жыл бұрын
great video, here passengers on our place! hi, Have fun watching, all the best ! Lawotschkin La-9 , Bearcat
@ramonmedina1974
@ramonmedina1974 2 жыл бұрын
Tolles Modell!
@RCPLANEVIDEOS
@RCPLANEVIDEOS 2 жыл бұрын
Vielen Dank!
@aglh1177
@aglh1177 8 жыл бұрын
OMG, it's beautiful.
@RCPLANEVIDEOS
@RCPLANEVIDEOS 8 жыл бұрын
many thanks ;-)
@michaelbartelt3221
@michaelbartelt3221 2 жыл бұрын
great video, here passengers on our place! hi, Have fun watching, all the best ! Lawotschkin La-9 , Bearcat
@vicyboy12
@vicyboy12 6 жыл бұрын
Hi is this engine weight okay for this model? Or you need to add more weight on the firewall? I plan to get moki 215 for this model. Will it fit?
@RCPLANEVIDEOS
@RCPLANEVIDEOS 6 жыл бұрын
Hello, it is enough if you ask the question 1x and not 4x in my videos ;-) If you build it properly you will not need lead. But it was very tight under the hood with the Moki180 (255mm), I think the Moki215 (285) is a little too big, the hood is narrowing forward. There should be a measuring where the model has !!! The model has to be completely reworked, otherwise it will not withstand this engine!!! - check all ribs (hull), glue back or glue in again - Check engine frame, if necessary, rebuild - Modify and / or rebuild the landing gear shaft and place it at an angle to the front otherwise headstand is announced! See link chassis pictures - Tube could be too short (4-5cm), necessarily measure and if so buy new - Definitely remove these wing threaded bolts and replace them with bolts from the back. In addition, maybe two pins in the area. - Reinforce fuselage with 2-3 GFK mats, more because of transport, I would say that is quite thin, otherwise cracks can occur which would be annoying - SP on 195mm (easy top-heavy, but only slightly) - Air outlet note that there is enough available Interesting, especially see chassis pictures: www.warbirdforum.de/forum/thread....id=&hilight=LA7 because of the threaded bolts, see here, different model, same sch *** principle (see page 1 & 3): www.warbirdforum.de/forum/thread....htuser=0&page=1 maybe some info to find, cockpit, pilot, antenna other: www.warbirdforum.de/forum/thread....htuser=0&page=7
@michaelbartelt3221
@michaelbartelt3221 2 жыл бұрын
great video, here passengers on our place! hi, Have fun watching, all the best ! Lawotschkin La-9 , Bearcat
@vicyboy12
@vicyboy12 3 ай бұрын
Hi Marcus, May i know your how much right thrust and down downthrust used on the engine?
@RichardGee9
@RichardGee9 7 жыл бұрын
Markus, have you been happy with the performance of the Moki 180? Is it a big improvement over the 150? Beautiful video!
@RCPLANEVIDEOS
@RCPLANEVIDEOS 7 жыл бұрын
Hello and many thanks !!! My engine runs perfectly, I am very satisfied ;-) The 150 is a little bit weaker. There you have also 1-2" smaller propeller then.
@michaelbartelt3221
@michaelbartelt3221 2 жыл бұрын
great video, here passengers on our place! hi, Have fun watching, all the best ! Lawotschkin La-9 , Bearcat
@fernandoperezhidalgo264
@fernandoperezhidalgo264 4 жыл бұрын
👍
@RCPLANEVIDEOS
@RCPLANEVIDEOS 4 жыл бұрын
many thanks 😊
@michaelbartelt3221
@michaelbartelt3221 2 жыл бұрын
great video, here passengers on our place! hi, Have fun watching, all the best ! Lawotschkin La-9 , Bearcat
@vicyboy12
@vicyboy12 3 ай бұрын
Hi, may i know what is EWD: 0,5° ?
@RCPLANEVIDEOS
@RCPLANEVIDEOS 3 ай бұрын
EWD is in englisch "setting angle difference" or better "angle of incidence"
@vicyboy12
@vicyboy12 3 ай бұрын
@RCPLANEVIDEOS Meaning your C.G slightly nose heavy about 0.5deg?
@RCPLANEVIDEOS
@RCPLANEVIDEOS 3 ай бұрын
@@vicyboy12 EWD = EinstellWinkel-Differenz Auf Englisch: longitudinal dihedral Search in Google for picture 👍
@vicyboy12
@vicyboy12 2 ай бұрын
@RCPLANEVIDEOS Thanks for the explanation. May I know how much your right thrust and down thrust? Did you use the manufacturer right thrust?
@RCPLANEVIDEOS
@RCPLANEVIDEOS 2 ай бұрын
@@vicyboy12 yes, that fits the model. Mine here was only reinforced with fiberglas mats in the fuselage and the landing gear mount was completely rebuilt. My connecting tube was also too short and needed a different one 😅🙄
@tigranohanyan3321
@tigranohanyan3321 7 жыл бұрын
Next step is to biuild a real one. It will be just 3 times bigger :)
@michaelbartelt3221
@michaelbartelt3221 2 жыл бұрын
great video, here passengers on our place! hi, Have fun watching, all the best ! Lawotschkin La-9 , Bearcat
RC LAVOCHKIN La-7 Jan Doubrava 3th in class F4H Meiringen
7:40
RC nuessgi22 Markus Nussbaumer
Рет қаралды 4,7 М.
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
WORKSHOP WEDNESDAY: Panzer IV vs T-34 Driving Experience!
18:22
The Australian Armour & Artillery Museum
Рет қаралды 1,6 МЛН
(4K) Antonov An-2 pilot POV - RAW SOUND of a 1,000 hp radial engine!
37:19
Sergey Vyatkin | An-2 pilot
Рет қаралды 1,7 МЛН
WarBird Models F8F 96” Reno Bearcat by CY Models Unboxing
6:02
How an 18th Century Sailing Warship Works (HMS Victory)
25:27
Animagraffs
Рет қаралды 12 МЛН
2021/09/18 LA7 Cymodel / SAITO FG90R3 / 2.45m
4:27
Club GUYNEMER60
Рет қаралды 1,7 М.
Как устроена сирена воздушной тревоги?
25:34
Музей Подземная Москва — Live
Рет қаралды 151 М.