Labelling accuracy with the Krones Contiroll

Reel-fed labelling - the Contiroll from Krones. For fully automatic application of labels to an enormous spectrum of different containers. Able to handle colour-printed films and reverse-printed transparent labels. The Contiroll HS model for the high output range can handle up to 67 000 containers an hour.
The Krones Group plans, develops and manufactures machines and complete lines for the fields of process, filling and packaging technology. Its product portfolio is rounded off by information technology, factory planning and products from Krones’ subsidiaries as intralogistics, valve production etc.
You can find all current information about Krones AG here: www.krones.com/
And much more on our corporate blog: blog.krones.com/

[@viktorkurylo6190]

Good. We use such machines !!!

[@MarcosAntonio-yq6cy]

É muito show 👏👏👏

[@acpropulsion6191]

1:00 machine running backwards

[@markej00]

Hello. I usually use labels with aprox. 26cm long for sparkling water, my question is: why the tip of it (right side) always goes up and down depending on machine velocity?

[@krones]

Hello, You’re welcome to call our service line or contact our support team via email - more info here: www.krones.com/en/products/service/support.php Our colleagues will help you along with your request! Best regards, Krones

[@gregarellano2333]

What is the reason why label of krones labeller always vacuum gripper cylinder monitoring label, what is the root cause any idea

[@krones]

Monitoring of the vacuum gipper helps to control the labelling process if you need support for your Contiroll the KRONES help desk is your ideal contact the Krones Support www.krones.com/de/produkte/service/support.php

[@saeedbasabain4188]

Nice

[@muhammadtauseef1677]

Can anyone help me how I can solve this problem . when I start the process my first label cut in short after cut good length

[@krones]

muhammad tauseef You’re welcome to call our service line: 09401/708090 or write an e-Mail at [e-mail]. Our colleagues will help you along with your request. If there are any complications please let us know. 😊

[@manuelbalderas9879]

por lo regular es por que se desincronizo el sensor del corte original que tenias, suerte!!

[@SR5CinCoYota]

It’s trying to register it’ll adjust deviation whether UV sensor or registration mark

[@64jsanchez]

bravo

[@64jsanchez]

me gusta

[@kadourbourada1120]

Bourada Kaddour de Blida les machines KRONES c'est les meilleurs au monde haute technologie

[@mijeevox6961]

what is PLC used?

[@mijeevox6961]

Fast reply pls

[@krones]

Unfortunately, we do not understand what you mean. Could you please formulate your question more precisely, so we can give you a decent answer? 😊

[@acpropulsion6191]

Depends. Either BNR, AB or Siemens.

[@SuperChoChoBOY]

the label cannot continuously send to the container and stuck at glue drum. Level of the glue uneven top and down. In this situation what are action can be taken?

[@krones]

Hello, you’re welcome to call our service line: 09401/708090. Alternatively, you can send us an email to this email address: [e-mail] Our colleagues will help you along with your request. If there are any complications please let us know. Best regards, The Social Media Team

[@rezzejseyer8030]

If the drum is clean try to make zero position for the drum and carousel

[@SR5CinCoYota]

Drum or vacuum pads or rail may be worn out or need to be propped Lu adjusted and calibrated or also glue drum could be worn check glue scraper

[@ebukareuben5785]

@@rezzejseyer8030 Hi Rezzej it's like you have great knowledge of the Krones Labeller , please what can cause deviations in the cutting length when the label is about to finish and it also starts having label carryover,but when changed to a bigger label roll it cuts to the normal length?thank you.

[@SR5CinCoYota]

@@ebukareuben5785threshold and registration mark on label

[@padmam123]

How is cost

[@krones]

MB APPARAO DORA Unfortunately, we can not say that in general. On the one hand, the prices of our lines vary according to their equipment and the requirements of our customers. Moreover, out of respect for our clients, we are unable to disclose the costs of customer projects.