Do Suction Cup Dent Pullers | Removal Tools Work?

[@richs15]

Warming up the metal before pulling will help to pull out the dent a little easier. My car was in the warm sun and once hot it worked on the first try.

[@LakesideAutobody]

Good info Rich thanks :)

[@mechanic1955.]

I used one of those and I found out having someone pour boiling water as you pull seems to help just got to be careful not to get burned.

[@stevewarren3051]

I've got a suction cup slide hammer dent puller that is used with compressor air to create suction. Works good. I pulled a similar dent out on a pickup bed the other day.

[@LakesideAutobody]

That's good to know - might have to look into one. Thanks Steve :)

[@DCopp]

Sweet vid. My buddy popped a door dent out on a Ranger back in high school with a toilet plunger!

[@LakesideAutobody]

That's probably how it got invented - have a good weekend Snake Doc :)

[@805ROADKING]

Definitely worth keeping for the right application!! Even pick up another one to help with windshields and back windows!!☺

[@pstreetgarage7304]

I tried a cheap suction cup set to pull a ding off of my Tacoma. I dont have a pogo stick and I didnt dare tap with a hammer. I got some of it out.

[@bluesman6955]

Another well produced video Jerry. Thanks for taking the time to make it.

[@LakesideAutobody]

You're welcome Bluesman - glad you liked it - have a great week :)

[@moparnut6286]

As someone already mentioned using hot glue can work well when the rubber on the suction cup breaks up I keep the handle and glue it to the dent and pull.... Have a great weekend man always enjoy watching you!

[@LakesideAutobody]

You too my friend - I've known you for quite a while now :)

[@dillonqaphsiel7977]

Very helpful. I hit my sisters mail box and it pull a half foot dent in my door no damaged paint so I think this will work

[@LakesideAutobody]

👍😊

[@jimfeaster4837]

I have no luck with suction cups !

[@ChipsAndSparksGarage]

Looks like it has a place in the shop. Probably wouldn’t work with any sharp creases though. 👍

[@LakesideAutobody]

You're right - it has to be the perfect dent :)

[@husky1232]

It has its plase in the bodyshop for shore I would defenetly keep one and for the price why not good video I always wanted to see the suction puller been used and now I have thank you for the video Jerry stay safe and have a great weekend

[@LakesideAutobody]

You have a good weekend too my friend - stay safe also :)

[@johnlew1231]

Can the suction cup dent remover be used on roof rails?

[@LakesideAutobody]

It might work on anything flat and shiny. If there's nothing for it to cling or create suction to, it ain't gonna work :)

[@orbital16]

Have you tried attaching it to concrete, does it attached? I'm planning to buy this just for hanging something light staff in my wall. Thank you

[@LakesideAutobody]

I don't think it would crate suction on concrete - would just fall right off :(

[@olenaerhardt7725]

@ 0:30 What if to put a bit of Hot Glue on that suction cup? I was looking for applications of a Suction Cup with that glue (or Cold Glue), but didn't see anything, though I saw before a film, where someone used a 2x4 wood pieces, attaching them w/hot glue to the huge dent. I would appreciate any opinion on this matter. Thank you for a great film.

[@LakesideAutobody]

Interesting idea. I'm curious myself so I try to do a video on that soon. I'm positive you wouldn't be able to pull more serious dents but I'm thinking it would work on light damage. Thanks for checking this one out - have a great week my friend :)

[@olenaerhardt7725]

@@LakesideAutobody Thank you for the replay. I have a huge dent on the DS Front door. The blow was such that the car parked on the road flied on the side walk and ended there. Fortunately none of the columns (A- or bottom) were damaged, just the door and lower hinge. I saw in films similar doors, they were replaced. I want to try to straighten it to have more time to find the door of the same color. So I have a huge dent indeed, and currently even can't open that door. Thank you again.

[@THX..1138]

I used one for a big oilcan dent once, but with thing popping off I came close to hurting myself. So not sure when/if I'll use it again.

[@LakesideAutobody]

That's really what happened with this one - almost fell backwards :)

[@JP-kg6wn]

Excellent improvisacion very helpful. Thank you

[@LakesideAutobody]

🛠👍😊

[@tony1798]

Great video

[@jayinmi3706]

So, it works* but it works better if you have additional, more expensive tools to go with it (i.e. Pogo Stick). lol

[@LakesideAutobody]

Good point. I think it would do better with some flimsier metal though :)

[@tonywhite9761]

Hey Lakeside seen in 1 of your previous videos you used bondo professional glazed putty !! Do I have to use the hardener? I see you just squeezed some and put some on truck fender?? Blocked it and primed!

[@LakesideAutobody]

Uses no hardener, dries super fast and easier than heck to sand. You can glob it on though - just thin little spots. It's all they used back in the old days - Lacquer Spot Putty

[@tonywhite9761]

@@LakesideAutobody thank you sir!

[@LakesideAutobody]

@@tonywhite9761 You're welcome :)

[@nicsivan5105]

Me and my bro have this suction dent repair tool one time since its cheaper but I know metal panels are hard to pull with this stuff and used to pull only on FRP parts like modern bumper covers. The situation is we have to pull a dent located lower quarter panel. Then have this tool placed and ready fir pulling. Im crouching into the ground and I cant pull that much so I ask him my help. We cling both hardest we could but this thing pops and we tripped on our backs landing like 2 collapsed wooden planks. Its embarassing maybe it will need some work.

[@LakesideAutobody]

That had to be really funny to watch as long as no one got hurt. It would probably get a million views on YT :)

[@giancarlofedeli9314]

Dove si acquista grazie

[@LakesideAutobody]

www.amazon.com/FILBA-Suction-Remover-Paintless-Universal/dp/B01KLWJGZG/ref=sr_1_1_mod_primary_new?gclid=Cj0KCQiAmaibBhCAARIsAKUlaKTmK208cNBTQHOGKi5eGUJhMihf7vmS-

[@DERDM]

would the small suction dent puller work for hail dents?

[@LakesideAutobody]

A ding from hail is pretty tough to pull for a suction cup puller. I don't think it would have the strength.

[@michaelmarusic8499]

👍🏻looks like it worked for your situation. Have you ever tried the glue on dent pullers? I think I seen them at harbor fright.

[@LakesideAutobody]

I might have to look into it. I go to HF quite often so - I'll check it out. Thanks Michael and have a good weekend my friend :)

[@ericcarr1648]

I've noticed you have a different guitar riff in all your videos, are you a fellow guitarist?

[@LakesideAutobody]

Yes - it's been challenging me my whole life but I think I finally learned how to go back and forth on one string consistently and comfortably w/o getting caught on the string, the pick moving around, or weird unwanted sounds. What kind of music or guitar do you play?

[@burnzz100]

Don’t understand the hammering?!

[@LakesideAutobody]

When you straighten a nail you're pounding on the high spot and pushing up on the low spots. Same concept here :) If that doesn't help ask again 👍

[@stephanegarnier7002]

good job

[@LakesideAutobody]

Thanks Stephan - enjoy the week :)

[@edbeck8925]

👍🏻👍🏻👍🏻👍🏻👍🏻

[@KrisMartin70]

How To beat the hell out of your truck!

[@LakesideAutobody]

That's actually necessary to bend the metal back into shape. Like straightening a nail - you hit the high area :)

[@doowop6409]

why is he playing drummer

[@PnwOnTour]

No match for the Chevy metal, best one was that chick who used her personal device, thinner metal

[@LakesideAutobody]

You're right - it was no match for that Chevy truck bed side :)

[@Mymusicfmw33]

Why use a hammer?

[@LakesideAutobody]

The same reason you use a hammer to straighten a nail or a bent piece of metal. You pull on the lows and knock down the high creases. If that don't help ask again :)

[@jimfeaster4837]

I cant belive it worked...

[@VarHar-x1k]

. That's a good tool but it won't do any job that needs expert. .

[@walkertongdee]

Cool but now you have to polish the whole freekin truck....

[@LakesideAutobody]

Well that side is getting painted soon so....

[@traciconner9200]

Are you serious right now.....???? It's not THIS DRAMATIC .... a pogo stick 😂😂😂😂

[@LakesideAutobody]

Why exert more strength than you need too. One hand to pound and one to pull. Couldn't pull hard enough so.... pogo stick for leverage. You're probably much stronger than me though so no need for the stick right 😁

[@ZeeButsog]

Get a big hummer and wack it!!!!!!!

[@LakesideAutobody]

👍🛠

[@VarHar-x1k]

. hummer or hammer? .

[@kindrs2rud]

Wow that thing is garbage

[@LakesideAutobody]

It can't do a ton but it's not bad to have around for a "perfect" situation.

[@chad7789]

Nope, can't get the stupid thing to create any suction whatsoever

[@LakesideAutobody]

The panel has to be super smooth and shiny - like new paint. Try it on glass first - if it don't stick to that, there's something wrong with the suction cup :)

[@lisagoolsby-werdebaugh698]

Same 💯

[@MGB-learning]

Great video

[@LakesideAutobody]

Thanks - Happy 🦃