Yes....another build series. Decided to take on an overland build for this D1 while also working on the two Range Rover Classic builds. Why? Because three builds are always better than one. Follow along and enjoy :)
Пікірлер: 24
@sniperpro_sa8 ай бұрын
Hello, great job. I changed the suspension system as you did, but I had a problem while driving at speeds exceeding 50 miles. I think it is from the rear driveshaft. What is the solution? 0 Also, I would like to know what the size of the tires in the video is. Thank you.
@nineelevensouth8 ай бұрын
Thanks. Appreciate you watching. They are 33” tires
@yrigoyen01085 ай бұрын
Can you tell me what wheels and offset you have please?
Shame , you never had the intelligence of fitting extended brake hoses ,
@TheNorthernExplorer Жыл бұрын
That’s a nice kit! I do like the ome kit, I couldn’t afford that so went more budget. I’ve literally just done a suspension swap on mine, I used waterpump pliers to hold the shock
@nineelevensouth Жыл бұрын
Yea, luckily the parts car I got a deal on had the OME kit. Smart call on the pump pliers. Didn't think of that!
@ПашаОсипов-ф8ь5 ай бұрын
Good day. What name of this kit ? Thank you.
@nineelevensouth5 ай бұрын
Old Man Emu 3" Lift kit
@Kris-jk9mq Жыл бұрын
I chiseled OFF the metal Caps/cones for the lower rear shock mounts per Terriferrma insructions, as I seen binding on extreme tilt.. After my 2+" lift I installed F/R caster corrected Arms and TF bushings all around because it was not fun to drive at 50mph+, actually terrifying (coming from someone who road wheelies at 120mph+).. Also to note, I HAD to DROP the front sway bar down on blocks 1-1/2 to 2" as there is front driveline interference you must avoid at all costs.. Enjoy your Disco 1 Build!
@nineelevensouth Жыл бұрын
Thanks. Not experiencing any of those issues but appreciate the info!
@gheorghebelteu428 Жыл бұрын
Grup dif.spate Land Roar Discavari prestez..
@lowwill2986 Жыл бұрын
I used a big set of channel lock ploers on the front shocks to keep from spinning when taking off and on.
@nineelevensouth Жыл бұрын
I actually tried that with no luck....
@jerrygreene7139 Жыл бұрын
Looks great! Nice work! Do you have a preferred penetrating fluid you like to use?
@nineelevensouth Жыл бұрын
Thanks! I use PB Blaster
@drewrothschild5217 Жыл бұрын
How did you get the rear shock to stop rotating when you took off the lower bolt?
@nineelevensouth Жыл бұрын
Mine didn’t rotate for whatever reason, but I would assume you can do something similar to the front shock technique I describe in the video.
@drewrothschild5217 Жыл бұрын
Thanks. Mine maybe the original shocks - lots of Blaster, torch and they aren’t budging for days. I may just cut them off!
@nineelevensouth Жыл бұрын
@@drewrothschild5217 as long as you’re not RE-using them I would suggest that. Nice and quick