land rover door alignment

[@Scoutss21962]

Thank you for the video. just what I needed to know to align my right door. I had the exact issue.

[@retro.restorations]

You're welcome! thanks for watching 🙂👍

[@lookcreations]

A way off this yet, but planning ahead for when I get doors. 😃. All the best Craig.

[@retro.restorations]

You're not a million miles away pal. Did you get the tub on OK? 🙂👍

[@retro.restorations]

I ment bulkhead not tub🤦🏻‍♂️

[@lookcreations]

@@retro.restorations yes, ended up with 5 mm thick shims between footwell and chassis brackets.

[@retro.restorations]

That's not bad at all considering the amount of work the bulkheads had I'd be happy with that. 🙂👍

[@highdownmartin]

I’ve had a R clip on a piece of chain to attach the bonnet strut at the lower point. Always secure but easy to pull that out and disengage the strut and lean the bonnet against the screen. Or remove it entirely. Also wouldn’t you want to slack the bolts between the wing and front panel? As the bulkhead goes forward, the wing is pushing forward too

[@retro.restorations]

I was trying to undo as little as possible I think its actually the roof that's holding it. I'll have another hour on it today its only 2mm out but its bugging me.

[@highdownmartin]

@@retro.restorations you’ll end up like the car on father Ted when he was just chasing that little dent out

[@ianwallett7438]

@@highdownmartin that made me laugh!

[@retro.restorations]

I can't remember that one I'll see if I can find it👍

[@ianwallett7438]

The capping on mine was riding high in exactly the same place, I just got heavy handed with the bolt on that corner and it wound it down. 👍

[@retro.restorations]

I'm going to have another go at it today I didn't realise how high it was until I fitted the door 🤦‍♂️

[@ianwallett7438]

@@retro.restorations I was wondering if the galvanising process had warped it.

[@retro.restorations]

It was like that when I took it off so I assumed it would go back on fine but it might of warped another couple of mm. I've found a prop shaft ill stick new uj's in and it's yours.

[@ianwallett7438]

@@retro.restorations top job! I’m taking a shed down today but if I get time I will put the stuff in a box and get it sent to you. 👍

[@retro.restorations]

No rush pal👍 I'll do a video changing the uj's next week.

[@nicowilson]

Excellent video. Thanks

[@retro.restorations]

No problem 🙂👍

[@srw_cricket2976]

Hi Craig, what's the gun make/spec?

[@retro.restorations]

Hi, it's a kielder KWT-012-51 700nm it's a very good impact gun for the price I would recommend getting one 🙂👍

[@mattluszczak8095]

What colour is the landy?

[@retro.restorations]

hi, its marine blue 🙂👍

[@gokmenturk8301]

Loss also streering colom and bolts front wing?

[@retro.restorations]

That does help if you need it to go a little more.🙂👍

[@ALIasa912]

what is color code paint for ur defender ??

[@retro.restorations]

It's marine blue LRC006. 🙂👍

[@rz7093]

What wheels are those???

[@retro.restorations]

If I remember correctly they're modular wheels I can't remember what tyres. 🙂👍

[@user-ky9hb2nr5n]

👎🙃🙃