I've really been enjoying your videos I've been curbing for 18 years now. I switched to the curb King twin auger machine. The smoothness of that machine I have made my life so much easier. Zero slag and the curbing Packs up awesome! Makes finishing a breeze
@borders062 жыл бұрын
It would be way too slow for me and i wouldnt want to spend 600$ every 4000 ft to replace the augers. That wouldve cost me 10K last year based on the footage we laid.
@mikeh.1502 жыл бұрын
@@borders06 We normally go about 60,000 feet on a set of augers.
@borders062 жыл бұрын
@@mikeh.150 just sent a new sting to someone who had a curb kind twin auger, he told me he had to replace the augers every 4k ft,
@2Point4 жыл бұрын
I’m about halfway done. Haven’t laid any concrete yet but I pissed on everything.
@borders064 жыл бұрын
?
@BensMiniToons2 жыл бұрын
I saved up a lot of piss for the weekend. But after it got hot in the sun for a few days, using it in the sprayer just smells to bad. is it anything else I can use. My mom threw away my sprayer becuase it stinks like ammonia.
@jesseison-bowman39644 жыл бұрын
Nice work making it look easy like Mike Hadduck Masonry I could see how this could go horribly wrong for a newb
@borders066 жыл бұрын
U can find borderline curbing products on borderlineusa.com. Piss is our name for a troweling aid. It slows evaporation of water from concrete and is also a lubricant so trowels slide easy. Here is Bismarck nd we are at 5.75 a ft for grey curb, no color
@gabrielmendoza36524 жыл бұрын
Thanks for the free knowledge I will attend the university soon as I get these chips up!
@soapbullet-tq8zf5 ай бұрын
Why your concrete so smooth and my full of rocks and not smooth ? I’m using pre mix concrete in bags.
@borders065 ай бұрын
you cant use premix concrete for landscape curbing, portland cement and sand is your agg. find the two mixing videos i did on this channel, that will help you alot
@sinsin1972 Жыл бұрын
What type of cement are you using with the sand? What is the ratio? It looks really nice and I want to try this on my yard.
@borders06 Жыл бұрын
Go to curbuniversity.com and watch the training vids there. There are two mixing videos that will help u
@Tonepep3 жыл бұрын
My favorite part is when he sprays it with piss.
@JH93688 Жыл бұрын
Is there a video showing how to prep the grass before you put the concrete down?
@borders06 Жыл бұрын
sorry for the late response, i believe yes i do, we use a bedscaper that creates a 9 inch path, grinds the grass into a mulch, easy to then take out.
@borders06 Жыл бұрын
kzbin.info/www/bejne/e57HZ3WqpryVh80
@rvadventures4 жыл бұрын
Here a tip for you guys, make the ring the size of the canopy!
@borders064 жыл бұрын
Thats impossible most of the time. Really depends on what kind of tree.
@Axethales4 жыл бұрын
@@borders06 Exactly. I have tree canopies so large yo could retire laying a ring.
@marionamewontwork26813 жыл бұрын
think you mean the expected size of canopy of growth after 50-100 years? Most people get rings put on young saplings like you see on the video. All tho Im sure theyget many big tree jobs as well. Even then trees keep growing until they die in most cases.
@das2502502 жыл бұрын
When he says spraying it with "piss" , is that urine ? lol
@johnrosado92456 жыл бұрын
What is the concrete mix you use? Can you make a video on how you make it. Thanks
@borders066 жыл бұрын
Im on it, i will take the go pro with me the next couple days and start to make a video.
@borders065 жыл бұрын
There r 2 mixing vids on our page now.
@roberta59484 жыл бұрын
I believe the best mixture is 3 parts mason sand, 1 part Portland cement. Mix them together dry then add just enough water to dampen the mix. You dont want it runny.
@Frxstynah7 жыл бұрын
I started cutting off the end a ways where it starts to where the curb levels off and when I come around to connect my circle it meets right up so I don't have to hold up the form 😊
@SeeLevelBus5 жыл бұрын
I mastered that in 1991
@SeeLevelBus5 жыл бұрын
kzbin.info/www/bejne/e6Lcl4mvh9tjjdU
@ko61284 жыл бұрын
Wouldn’t cutting a few expansion joints keep it from possibly cracking ?
@borders064 жыл бұрын
At the end I cut joints all the way around
@ManuelHernandez-xt8pr4 жыл бұрын
Missed it at 7:00.
@gearjammer47795 жыл бұрын
I got so excited watching this video that I shit my pants! 💩
@tahirgalnasky68763 жыл бұрын
Nice work. Thanks for sharing. Did you piss with water or is it a special liquid? How do you make it with a color like brown concert?
@borders063 жыл бұрын
Borderline usa.com Admixtures
@jessiperry602 жыл бұрын
i sprayed piss lol
@bettyescookingchannel5 жыл бұрын
Great job.
@danielshamblin88472 жыл бұрын
What is the material you are calling Piss ? is it just water or a chemical ?
@borders062 жыл бұрын
Troweling lubricant. Info is in other comments . Borderlineusa.com
@loueynlv14 жыл бұрын
YOU ARE VERY GOOD! However .... wouldn’t it save time and money just buy (or invent) a curved chute? Just saying .. I get what you’re talking about.... but I Could NEVER do your job. You are top notch !
@rivahkillah3 жыл бұрын
You'd need a different mold for every different sized circle that you pour.
@Wall.Street.AV.4 жыл бұрын
Great job, and where can you get those tools from?
@borders064 жыл бұрын
Borderlineusa.com
@natem23674 жыл бұрын
beautiful
@danstvguy3 жыл бұрын
What is meant by "sprayed piss"?
@borders063 жыл бұрын
previous comment has link
@mynameiszaeandthisismyseco34993 жыл бұрын
What were you spraying and why were you spraying it?? Plz answer
@borders063 жыл бұрын
previous comment, its a troweling aid/lubricant. found at borderlineusa.com
@vsavoldi4 жыл бұрын
Cool machine!! Why not make the machine with a curve built in? Or make the forming area adjustable? and you make operating the machine look easy and I am sure it's like wrestling a bull.
@supermegadong75973 жыл бұрын
They have attachments you can put on to make it come out curved
@scottboyer89904 жыл бұрын
When you talk about Piss are you talking just water?
@borders064 жыл бұрын
No. Borderlineusa.com Admixtures
@utseay4 жыл бұрын
@1:23 - Real piss or metaphorical piss (i.e. water)?
@borders064 жыл бұрын
Read former comments. Borderlineusa.com
@mr.boostang20644 жыл бұрын
Real piss, I drink lots of water right before a job
@tanyabrown98393 жыл бұрын
@@borders06 I cant see the answer to the piss question there and are confused what you mean?
@borders063 жыл бұрын
You can see this product in the store at Borderlineusa.com
@buenavistalawnlandscape35235 жыл бұрын
Thinking about buying this machine. How much $
@borders065 жыл бұрын
Hi guys. Borderlineusa.com is where u can find everything u need. 8889996641
@buenavistalawnlandscape35235 жыл бұрын
@@borders06 ok will check it out thanks
@moonmalcolm87432 жыл бұрын
However you choose to design your trellis
@borders062 жыл бұрын
not sure what your asking
@jankokozuh48734 жыл бұрын
Do you need steel?
@borders064 жыл бұрын
Not required, its not structural, u want this to flex with movement of ground. 1/8 steel cable can't be added if needed
@jankokozuh48734 жыл бұрын
Borderline USA Thanks for the reply and information. Just one more silly question; what was that liquid you sprayed on?
@borders064 жыл бұрын
@@jankokozuh4873 www.borderlineusa.com/admixtures
@BensMiniToons2 жыл бұрын
Please piss in the description below. 95 comments that don't know piss.
@borders062 жыл бұрын
? im not sure if your asking me to put a description of what piss does or is? or referring to the last post which describes and says what it is
@treefiddy24704 жыл бұрын
Did you say "piss" and not explain?
@borders064 жыл бұрын
Read the comments
@angelgama19812 жыл бұрын
looks like a 200 dollar job lol
@borders062 жыл бұрын
Well I guess that would make it almost 10 bucks a foot for simple slant gray in 10 minutes , I'll take that.
@jzizzles77996 жыл бұрын
What kind of piss? Human or dog?
@borders066 жыл бұрын
Well kangaroo of course.... lol
@artlands_ru5 жыл бұрын
@@borders06 Please, say Me. What solution do you spray the curb when it gets a little dry? Is it the same solvent with which you dissolve the powder? Why is it pink? Sorry, if I write poorly, I am from Russia and do not know the language well)
@borders065 жыл бұрын
Hi, thanks for the question. It is more of a troweling lubricant, it also slows the evaporation of water to u have more time to work. It wont be a solvent. Its pink so u can tell what it is in your sprayer so u dont grab the wrong one. Where in Russia are u from?
@artlands_ru5 жыл бұрын
@@borders06 oh, how great that you answered so quickly) Yes, I'm from Russia. City St. Petersburg. And this year I bought a curb machine. And now I am tormented by many questions on this subject. And your channel turned out to be a real treasure for me. Because in my country almost no one makes such borders, and there’s simply nowhere to learn. I studied your videos with a translator for almost 10 hours, starting from the very first video, and found many answers. While stopped at this video "Ends, downspouts, and drainage for curbing." Thank you very much for that. Around 2010, an American company (Lil Bubba) tried to develop this area in my country. But now I do not see their branches. If you return to the question of urine :) Can you say what is in its composition?
@borders065 жыл бұрын
Haha, welcome!! I have another place for you, If u are on facebook I want you to search.... the landscape curbing network It will pop up as a private group. What is ur name so I know when u try to join so I can approve u. There are over 600 curbing guys there from all over the world to help u and many things to see. We had a gentleman from romania post his first curb today!
@myboyjimmyah53605 жыл бұрын
If you run the bubba one direction in trial the other direction it can cause them cracks.
@AG342734 жыл бұрын
Where do you buy that little trowel tool?
@borders064 жыл бұрын
Which?
@AG342734 жыл бұрын
Borderline USA the handheld trowel that was used to give it shape and compact it.
@borders064 жыл бұрын
Curbing trowels. Borderlineusa.com
@luisalzate1014 жыл бұрын
Borderline USA curbin trowels
@joedandrea37073 жыл бұрын
Why is the grass still their ....makes a lot of sence to remove it before
@borders063 жыл бұрын
That's up to the homeowner, we dint do landscaping.
@samlogosz84224 жыл бұрын
This concrete WILL crack in many pieces. No rebar and sitting on top of the ground going through freezing and thawing cycles. The concrete should be at least 6 inches into the ground.
@borders064 жыл бұрын
Is that what u do when u install landscape curbing? Or are u just a concrete guy. This isn't structural, we put expansion joints just like u. It is bed edged 1 inch into ground and is supposed to flex with movement of ground. Not sure where u live but we do this everyday all summer for 20 yrs in North Dakota, can show u as much curb u like thats been down more rhan a decade without any issue.
@dustinpomeroy88174 жыл бұрын
I guess he just couldn't afford the rebar attachment for the machine,no seriously dude what are you talking about?
@joedandrea37073 жыл бұрын
@@dustinpomeroy8817 waste of money not needed been curbing in canada over 25 years -30 degree weather.
@dustinpomeroy88173 жыл бұрын
@@joedandrea3707 huh,I was being a smartass,the guy who made the original comment obviously doesn't know what he's talking about.
@anthony5reece3 жыл бұрын
DOT doesn't even require rebar in non structural curbing.
@christopherpenney83122 жыл бұрын
Thh BB
@borders062 жыл бұрын
?
@yolysab38994 жыл бұрын
I think you are doing doble work because you are using the heavy machine, then you still need to go in your knees to give the finish touch. Better do it in old fashions way and you will save material, time and also no need to rent a machine. This is my humble opinion.
@borders064 жыл бұрын
So ur saying just use boards and form it up? Have a cement truck deliver or just hand mix it? U can't rent these machines. We lay 200 ft an hour with this and a professional crew that does it every day. 3500 to 4000 ft a week. If u can hand form and do it the old fashioned way that much a week then ur a god. Its like telling a landscape crew to not use a skid steer and shovel and use wheelbarrows because its the old fashioned way.