Large mold component (cnc milling)

[@CncFrezar]

Hi guys. If you watch the video carefully you will also find cnc fail . Still, I hope you enjoy the video.👍😁

[@innominatum9906]

And please keep those errors in the videos. Shit happens and every machinist knows about it :D Good looking part in the end!

[@CncFrezar]

@@innominatum9906 thanx😁

[@gredangeo]

Your coolant flow was probably most to blame for that broken cutter. Need Thru Spindle Coolant. But that save though with the Wire machine. Is an excellent touch. That may as well be the original strategy for next time. Drill out any size hole so it exists, and then use the Wire to bring it to size. As for another idea. If that Wire machine was large enough. Is it feasible to cut that excess stock off, and bring it to a rough 'L' shape first? Instead of that side Op on the table? How long would that take?

[@yasharkhayamdar6306]

This is the most complete cnc Chanel on youtube

[@spikeypineapple552]

Without a doubt the most impressive //real// mould making on youtube. Absolutely fantasic

[@CncFrezar]

Thanks

[@importantdolphin8974]

@@CncFrezar kennametal tools don't break. try them next time👍

[@CncFrezar]

@@importantdolphin8974 I gave what I had😁

[@sachet_coffee]

mengingatkan saya dulu pernah menjadi seorang operator mesin cnc milling dan sekaligus programer... good job brother 👍

[@Avaante]

great job man.... congratulations for your experience and knowledge in milling special parts.. here in brazil i make small size mold parts

[@465maltbie]

That broken cutter wasnt part of the original quote...thanks for sharing. Charles

[@officialhipa5103]

awesome cnc milling. It's amazing to see how the mold component is made.

[@anthonydevault8425]

Really nice finished surfaces on all your work, great set ups for different operations, it shows that you really care about your job and trade. Hope your making top pay wherever you are.

[@TrPrecisionMachining]

very good job..thanks for your time CncFrezar

[@CncFrezar]

Thanks

[@brianropel]

Is high feed milling that first rough cut really faster than plunge milling that first segment off??

[@ВіталійЛейбц]

Despite the trouble you finished the job! Nice pice of art)

[@SaintMachinery]

why not use EDM Cut?

[@MajklskiLP]

Nádherná práce :) proti tomu je CNC soustruh prd :)

[@CncFrezar]

Vďaka

[@demirplastik]

Good luck 🤝

[@stefanoserventi3639]

Really great work! congratulations!!! Can I ask you for the code of the pramet insert. I can't read it from the box you photographed at 2:13 Thank you very much!

[@시골사람-e3z]

good job

[@mm.bouya55]

Great! Are all cutter feeds recommended in the catalog? It ’s really high speed！👍️

[@CncFrezar]

yes

[@damientoomey1194]

Very nice work as per usual

[@CNCAkademy]

Nice

[@naroprincess8070]

How long does the total cutting time take?

[@pyrorigich7237]

Very interesting part !! :)

[@c14rk29]

Krasna prace chlapi, jak vyrovnavate kus v druhe operaci, nebo mate sondu s detekci natoceni obtobku?

[@CncFrezar]

Vďaka. Vyrovnávame kladivom samozrejme hliníkovým 😀

[@c14rk29]

@@CncFrezar to musi bejt pecka, doklepavat ctvrttunovej kus 🤣

[@CncFrezar]

@@c14rk29 už so vyrovnával aj 4tony 😀

[@positivepositive1448]

Great job bro. How did you put it in the correct coordination? Can you give me an advice please

[@CncFrezar]

We had a precisely milled block. All other operations were based on him

[@wildin13]

Really enjoy seeing others finished work. Not just another tool maker but another country too. Can I ask, is that a BT50 spindle? And whats the working scope of that machine? Love those vices too 👍🏻

[@CncFrezar]

Hi. The spindle is SK 50. The feed range is X-2200mm Y -1500mm Z1000mm

[@wildin13]

@@CncFrezar wow thanks. Thats really put some perspective on your work.

[@pyrorigich7237]

nice Video!!

[@raider1628]

awesome video!! how did you machine the side pocket?

[@CncFrezar]

Thanx. It was made on a CNC horizontal boring machine.

[@Toannghiacokhi1]

New subscriber

[@noppornkamnutchanart9991]

WOW! WOW

[@ray-charc3131]

Why using wire edm? to straightenig the long lengths of the deep holes?

[@ipadize]

to make the holes straight and accurate.

[@liaokunming5718]

Nice work! !👍👍🏻👍🏼👍🏽👍🏾👍🏿 How many cycle time for this case?

[@CncFrezar]

Thanks. I can't answer that

[@liaokunming5718]

@@CncFrezar thanks . I get it!! It’s Trade secrets right😅😅😅😅

[@CncFrezar]

@@liaokunming5718 yes

[@jaroslavzaoral6526]

Super práce. Na to je radost se dívat, tím spíš že tam bylo i vyjiskření. Prostě normální den v životě frézaře. 😁 Jen dotaz, kolik hodin/minut frézování na tom teda nakonec bylo? Všechny polohy dohromady.

[@CncFrezar]

Ďakujem. Nemôžem však zverejňovať časy ani bližšie info o súčiastke.🤭

[@りんご-k4v]

Great works!

[@CncFrezar]

Thanks

[@파피루스-l5t]

항상 잘보고 있습니다. 굿~

[@vishnudeepu3667]

Try to use insert type ball mill !! To avoid cutter broken

[@CeErCeEr]

Hello, Thanks for the video, At 3:27, what was the thickness :) (I guess it was 0,1-0,2) Have a nice day.

[@CncFrezar]

Thanks .You're right about 0.2mm

[@алексейзолотов-ш1в]

Супер!!! Спасибо, очень полезно!!!

[@Alhussainba]

In the beginning, its shown that the workpiece comes from a giant block which you cut the workpiece from. I wonder, couldn't the cut have been done in a waterjet cutter to save a lot of time and bunch of material and tool wear...?

[@CncFrezar]

I don't know how much it would cost. I'm just a worker.

[@YUNTECH_]

HEATING CHUCK CALCULATION?

[@DolezalPetr]

chlapi máte to hustý

[@CncFrezar]

👍🙃

[@eminkamilcelebi8206]

Bu isi yapmak kac gün sürdü

[@ahmetalgan6671]

WONDERFUL

[@Toannghiacokhi1]

New subscriber +👍

[@recepkaraca781]

Solid Carbide Ball Nose End Mill 2379 Steel Finish Vc fz ap ae Please?

[@vishnudeepu3667]

Are yu using master cam??

[@CncFrezar]

Cimatron 15

[@vishnudeepu3667]

@@CncFrezar y don't yu use Nx!!

[@CncFrezar]

@@vishnudeepu3667 not

[@mekssss6192]

perfect ım turkish

[@zajawamotocykle9256]

Epic

[@yadong8037]

1980 we would have done it like that.

[@boringbrodi1772]

so u guys just dont have a bandsaw or anything

[@boringbrodi1772]

or even use that waterjet

[@CncFrezar]

We do not have. We needed to do it as quickly as possible. so we didn't even use an external company.

[@MK-yq3up]

Internacl cooling still does't work 🤭

[@CncFrezar]

He wouldn't help me

[@CAMER_21]

please don't add music please

[@chrislobby7447]

Just stop with the shitty EDM music intros guys...otherwise the video was fantastic

[@copywriteclaim7389]

Sir your wasting a lot of time by this type programming and plaining

[@mirohornik98]

Nice

[@Toannghiacokhi1]

New subscriber