LARGE NAME SIGN FOR BACKDROPS OR ROOM DECOR

[@juliettesaa]

Thank you for the video. Do you have a video showing how you attach the letters to the backdrop? I read that you use pins but do you hot glue them to the foam first? I’m having a hard time picturing how I can put a bar pin on the foam.

[@jeniestreamz]

So now I have an idea of what I want for my first vendor booth next weekend. Thank you 💕💕💕

[@kobusingeannkamisha9515]

Hey, how did you support or hang the sign on that fabric, are they colorless strings?

[@tiffanypotts8004]

Perfect thanks...What’s the name of the font? Can we cut foam or cardboard on the Cricut I’m sure I’d butcher the cut out by hand 😫

[@onecraftycookie3554]

Hello ! It’s called “cherishing moments” I actually made a stencil with my cricut first and then cut the foam by hand, I have another video on my channel showing how I cut out the stencil 😊

[@shaestheticsss]

Can you or do you have a video of how you printed this with your Cricut? for us Cricut girlies.

[@bosslady9717]

Lovely job, well done. Thanks for sharing 👍

[@donnagrundman400]

Can you please break down how you made the stencil with cricut? Please and thank you. I have to make one of these by the 18th of June & im so nervous

[@joebe7632]

thank you for the video! I can't figure it out but what was the material for the white background that you put the letters on and how did you put it on there?

[@cammy4u12391]

Thanks for the video!!! Which brand knife do you use (link for knife plz) , and how do you sharpen the blades, and how do you prevent bending the foam when removing the letters from the board?

[@thepracticaldiymomma1567]

Pwede ba to ipaint using water-based na acrylic? Hindi kaya mag fefade?

[@rosac.07]

👏👏👏👏👏 thank you for this. Quick question did u use gillter cardstock? Also have u seen the hot knife or trying using it? It cuts foam board like butter 🥰

[@onecraftycookie3554]

Rosalba Corona Hiii! I actually used glitter and modpodge! And when I first started making them I did try using a hot knife but it made it a lot more difficult for me especially because I was scared of getting burned 😩 but I think it was partially the lack of experience of using it too, a plain XACTO knife works really well for me but I might give the hot knife another try !! 😊

[@Iam__theblessedone]

What did you put to hold the sign on the curtain backdrop

[@jeanetteneely7280]

Hello, do you make for others and how do you put it on the draping without damage

[@jessycasegovia6474]

Can I ask why you do the first letter separately? From the whole name

[@josedelacruz5010]

What type and size stirofoam did you use?

[@tashashulman1076]

Can you write out or make a quick video on how you hang the name? It doesn’t appear to be attached to the sheer backdrop. I’m wondering if you use invisible string.

[@LUCKNMOREPUFF]

Use" bar pins"! Then pin it to the curtain!!

[@emmaprasad59]

How did you attach the letters to the curtain backdrop please?

[@onecraftycookie3554]

Hello ! I use bar pins and pin directly to the curtain, I show them in a video I posted a couple of videos back !

[@kayxlucious8248]

What’s that thing you carved the name on ? Please

[@breezyh1217]

How do you printer the letters out that big on the cricket

[@krystinagil9685]

What do u hang it with?

[@morganjohns7396]

How do you decorate it? what do you use?

[@gsmit2037]

Hi ! Thanks for making this video . What do u use to hang your word onto the backdrop material ?

[@onecraftycookie3554]

Hello ! If I’m attaching to curtains I use bar pins and then just pin on the curtains :)

[@wyrick67]

@@onecraftycookie3554 how do you attach the bar pins to the word

[@StephTheOriginal]

Did you cut another copy of the stencil with glitter cardstock and then glue it on?

[@onecraftycookie3554]

No, I just put glitter directly on the foam board with modpodge !

[@dawnadams9194]

How are you getting such a long continuous cut of the name with a Cricut? New to Cricut so trying to learn. And, how then do you hang the name? I assume you are using like fishing line, but how are you attaching the letters to it? Thanks!!!

[@onecraftycookie3554]

Dawn Adams Hi! I slice the name in design space so it cuts out in different pieces and then put them all together at the end ! I’m planning on doing some cricut tutorial too ! And If Im having on curtains I use bar pins to attach the name !

[@luisadelacruz8127]

Do you cut with a cricut machine

[@BibiAM86]

How do you make your stencil? Please share, I have no idea where to start

[@onecraftycookie3554]

Afeena Mohamed I made my stencil on design space by slicing the word, but if you don’t have a cricut im sure you can print it out and cut it out by hand and then piece it together !

[@lamboomowunmi9326]

Do you gum them to the curtains please

[@onecraftycookie3554]

Hello ! I use bar pins to pin it directly to the curtain

[@shikanah24ful]

Hello po. Anong type po ng card board gamit nyo? Salamat po

[@robychan4537]

Hi how did you have it stick to the linen?

[@BlueReaper59]

could you pls make a tutorial on how did you hang the name?

[@onecraftycookie3554]

Hello ! I actually just use bar pins to pin straight to the curtain, you can find them on Amazon 😊

[@MariaFlores-ml2lc]

Ok, I just spent like 8 hours trying to figure out and cut out the name Sabastian with card stock using my circuit, to attempt to make the stencil , but I think i messed up somewhere in slicing or maybe the name was too long? I ended up with so many tiny pieces. Idk 😭 i was able to put a lot of it together but i couldn’t plug in the tinier pieces Left. I refuse to give up lol so I can’t wait to see your tutorial on that. Please and Thank You! ❤️

[@onecraftycookie3554]

I’ve done long names as well ! It does take more pieces but it should still work out ! If you have an IG you can DM me on there and I can try to help you out !! @onecraftycookie_

[@mavislarbi2572]

Hi how do you hang your sign on the backdrop

[@blessed4ever2012]

How do you make the beautiful huge flowers?

[@yessi88]

Question: how much would you charge for this??

[@roennilynyanson]

Hi What kind of cardboard did you use?

[@onecraftycookie3554]

30x20 foam board (elmers brand)

[@martinezlorena3602]

What kind of board are you using under the foam to help cut?

[@onecraftycookie3554]

Hello! It’s a glass cutting mat by we r memory keepers !

[@silviaalfaro8329]

How do you attach the letters to the background?

[@rockydelrosario8]

How did u hang the styro name on the fabric? Answer me pls. Need asap!!

[@onecraftycookie3554]

Hello! I used bar pins to attach to the curtains !

[@ngarcia1310]

hi!! thanks for this! how do you hang your signs on the backdrops?

[@onecraftycookie3554]

Nathalie Garcia Hii!! I glue bar pins to the back and just pin it on the curtains !

[@zh9931]

Thanks for your guidance , which font are you using ?

[@onecraftycookie3554]

Hello! Cherishing moments !

[@jacintacannonier4247]

how did you get it that size on a cricut? the mats are not that large

[@onecraftycookie3554]

Hello ! I have another video on my channel showing how I cut out the stencil !

[@jacintacannonier4247]

@@onecraftycookie3554 thanks

[@samantalopez5946]

Hi, please can you tell me what is the type of letter, like Arial or Times New Roman, please, thank you

[@onecraftycookie3554]

Hello ! The font is called “cherishing moments”

[@samantalopez5946]

@@onecraftycookie3554 thank you so much!!

[@marieshielabalanza8288]

Amazing DIY! Just what I needed!

[@onecraftycookie3554]

Thank you so much !! 💕

[@telisamurry270]

What’s the size of the whole name?

[@junisaagang5879]

Tq sharing.. Love this

[@onecraftycookie3554]

Thank you ! Hope it helps ! 😊

[@nicolettemanalac2847]

Hiii, did you use styro?

[@onecraftycookie3554]

Hello ! I used foam core board !

[@3smeraldq563]

How did u get the font for the thumbnail those thingys that pop out?:

[@onecraftycookie3554]

Hello! I edited the thumbnail on PHONTO and the font is called “beauty and the beast”

[@bagotchayjojheelynn6471]

Is this made of styrofoam board?

[@onecraftycookie3554]

No! Just regular foam board (elmers brand)

[@kimberlyv10]

😍😍😍😍 can’t wait for more

[@onecraftycookie3554]

Kim RV yayyy ! 💕

[@genesisfeliciano7322]

What font did u use and mat on cricut?

[@onecraftycookie3554]

Hi! The font is cherishing moments And I just used a regular 12x12 mat

[@mirnatrujillo416]

Where can I purchase the letters?

[@onecraftycookie3554]

Mirna Trujillo hello ! You mean the stencil ? If you do I just uploaded a video showing how I do it !! 😊

[@henrybarragan5166]

Wow! Do you sell & ship these? I need one for August 28th. 😊

[@onecraftycookie3554]

Henry Barragan hello ! Unfortunately I don’t ship these as of yet ! Sorry ! But you can check out my IG for other things I do ship @onecraftycookie_ 😊

[@melissajoseph2125]

hi.. what material is your stencil made of and what size was it?

[@onecraftycookie3554]

Melissa Joseph hello ! It’s 65lb cardstock and it’s about 42 in wide and 14in tall!

[@tasharatravis2766]

@@onecraftycookie3554 hi I'm new to using my Cricut so I want to know how do I set up those dimensions in the design space?

[@miiih6293]

Beautiful! Could you share a tutorial on how to make the large template on cricut? Thanks.

[@onecraftycookie3554]

Miii H hello ! I actually have one on my channel already ! It’s the video after this one 😊

[@miiih6293]

@@onecraftycookie3554I will check it out, thank you.

[@patricebutler5647]

Good information! but do you have a video showing how you cut the stencil on your circuit

[@onecraftycookie3554]

Patrice Butler hello ! I do not, but I definitely will make one within the next week so stay tuned 😁

[@myecalma1667]

How do you pin the letters on the curtain backdrop?

[@onecraftycookie3554]

I attach bar pins to the back of name and pin to the curtains !

[@_ayaloha]

Where can you buy foam boards?

[@onecraftycookie3554]

I use elmers boards, I get them from either Walmart or michaels but Walmart is less expensive!

[@_ayaloha]

Thank you so much!

[@thepracticaldiymomma1567]

Meron po ba nito sa national bookstore? Hm po foam board? Thank you

[@kairahcorpuz7716]

What kind of font style is this? Tnx

[@onecraftycookie3554]

Cherishing moments !

[@nostalgia9000]

Can u plz share the main thing. I.e font you used for the outline.

[@onecraftycookie3554]

Hello ! The font is called “cherishing moments” 😊

[@anav4782]

Nice thank you!

[@angeliquefrost1843]

Hi how do you make your stencil

[@onecraftycookie3554]

Hello ! The next video on my channel is a video on how I made it 😊

[@micashorter9549]

Hi! How do you attach the finishing line to the letters for backdrop?

[@onecraftycookie3554]

Hello ! I actually attach the letters on the curtains with bar pins !

[@TakeHeartJh16.33]

One Crafty Cookie h H

[@cindyviscarra]

So helpful! Thanksssss❤️

[@isabellavu3346]

Hi! What size is the font?

[@onecraftycookie3554]

Hello ! The whole name is usually around 30-35in wide

[@brendauhila4283]

what font is this ? TIA (:

[@NaineMM]

How can I get a stencil. I don’t own a circuit. Help lol

[@onecraftycookie3554]

Hello !! Do you have a printer ? Maybe you can print the word out by parts and then cut it out by hand and piece it together as I did !

[@melisaadevine8146]

What font & size used to print please?

[@rhiz-ue7wo]

Hi paano po sya naidikit sa curtain or naisabit po?

[@onecraftycookie3554]

hi! Gumamit ako ng mga bar pin! Salamat sa panonood :)

[@msdyer247]

What is the name of the font you used?

[@onecraftycookie3554]

“Cherishing moments”

[@mariajonalibo-on8839]

Ano po ang tawag sa klase ng curtain na ganyan?

[@nayelimende500]

What font do you use please I need help 😭🥺

[@onecraftycookie3554]

It’s called “cherishing moments” 😊

[@nayelimende500]

@@onecraftycookie3554 thank you !

[@SURAHADA]

How you out on ?😂

[@Mayfadez14]

What font did u use?

[@onecraftycookie3554]

Mayfadez14 cherishing moments !

[@mazhappyfamily225]

Hi! Thanks for your vid. Can you also share how to attach the those on curtains? Thanks

[@onecraftycookie3554]

Hello !! I attach bar pins to the back of the name and then pin to the curtains !

[@mazhappyfamily225]

One Crafty Cookie - Thanks Much 💕💕💕💕

[@MariaFlores-ml2lc]

So cute!! What size letter are these ?

[@onecraftycookie3554]

Maria Flores thank you ! 💕 The whole name is about 42in wide and 14in tall !

[@MariaFlores-ml2lc]

One Crafty Cookie Thank You ❤️

[@mariefebiondo4167]

Do you have a pattern for the name??

[@onecraftycookie3554]

Hello ! I have another video on my channel showing how I make the stencil 😊

[@Skiddlesttr]

You should’ve probably added more steps than just how you cut the name

[@geemin3727]

But how do you cut your stencil? We need the steps completely

[@onecraftycookie3554]

GEE MIN hello ! I cut it out with my cricut, and I have a video showing how I do that on my channel 😊

[@yahairahernandez7223]

How to you make your stencils ?

[@onecraftycookie3554]

Yahaira Hernandez hello ! I make it on cricut design space, I’ll be making a video within the next week of exactly how I do it ! 😁

[@stephanyberrospe8892]

Hello! Would you be able to do a name that is 42 inches long?

[@onecraftycookie3554]

Hi ! Yes, you can dm me on ig @onecraftycookie_ or email me [e-mail]

[@mazhappyfamily225]

What font please?

[@onecraftycookie3554]

It’s called “cherishing moments”

[@nayelimende500]

@@onecraftycookie3554 thank you 💕 blessing for your business and you !

[@AnalynRonulo]

hello there :) if you allow this request hihi can you make /edit the word Rannah and Deem and send the files to me so i can print it directly hihi .. thanks in advance :D

[@MaryGarcia-gf8tz]

How do you put it on the backdrop?

[@Trinalil89]

Hi how did you attach the name to the backdrop?

[@onecraftycookie3554]

Hi! I attach bar pins to the back of the name and then just pin to the curtains !