Laser Engraver For Wood Turning - Fun!

[@davidharwood9552]

Ideal Father’s Day gift. I hope my kids are watching. Thanks Phil for sharing

[@PhilAndersonShadyAcresWoodshop]

😊

[@hicnb]

I don't think review videos can get much better than this.

[@PhilAndersonShadyAcresWoodshop]

I appreciate that, thank you! 😊

[@sianroberts3874]

Wonderful that this company chose you to try out their machine, Phil, with all its capabilities. I can see you'll have many hours of fun with this laser, great job as always. Have a lovely week. 💛🫂😊

[@PhilAndersonShadyAcresWoodshop]

Thank you, Sian, you have a great week, too! 😊

[@jewels7291]

Thank goodness for the 'preview' the laser did of the sizing. My husband and I were both sitting there saying, nooooooooo not 4mm, 40mm. Phew, disaster avoided. So grateful that you are willing to show everything to us 🥰

[@PhilAndersonShadyAcresWoodshop]

If I didn't show my mistakes my shows would be really short, Jewels! 😊

[@RevdUp.Art.Fotografer]

Phil, you crack me up. I'm watchin' you and keepin' up my side of the conversation as per usual. You mentioned metric stuff and said you weren't taught that; I agreed. Then you were reading and explaining about the distance vs the machine... and I was tryin' to follow you...and I wanted to help, but you didn't want it....oy....and ...then...you...said... 'don't laugh at me' ...and that's where I started laughing....and kept laughing....I wasn't even thinking about laughing until you said that I swear to Pete. Well Phil I don't know if anybody else did but you and I had fun. Yeah I'd like to see you using that on something on the lathe that'll be great. That picture of your daughter and her husband that really came out great. Good to see you havin fun. 😁 Peace, Kevin

[@PhilAndersonShadyAcresWoodshop]

Haha, we do get along well don't we, Kevin! 😊

[@RevdUp.Art.Fotografer]

@@PhilAndersonShadyAcresWoodshop 2 peas in a pod. 😉

[@ronhaworth5471]

My father was an engineer who passed away 1981.He would me AMAZED with the technology of today's world. Great Phil!!

[@PhilAndersonShadyAcresWoodshop]

Same for my dad, Ron. Just look at what WE are going to miss! Dang it! 😊

[@copperowlwoodturning5929]

Hi Phil. Thanks for showing us the laser engraver. So cool. Perfect size for a turner. I will definitely be looking into getting one. Take care. 😊😊😊

[@PhilAndersonShadyAcresWoodshop]

Cool, thanks 😊

[@stephanielovatt2787]

Well, Phil, that is some cool tool you have there! ..Or, should I say, "toy"? It does look really useful! I'll put it at the back of my mind, till the need is urgent, and the funds are ready. In the meantime, I will keep my eye out for what's available, locally. Cool stuff, Phil! Thanks!

[@PhilAndersonShadyAcresWoodshop]

It's just so much fun, Stephanie! 😊

[@janetalexander122]

Boy, it was fun just seeing you having such a good time playing with your new toy! What a neat idea to put your logo on all of your turnings. Thanks for the video.

[@PhilAndersonShadyAcresWoodshop]

Thank you, Janet! 😊

[@themusicalmrc]

I have a LaserPecker (original), I love it. I use it to engrave all my wood and leather projects. Sure it has limitations, but at the price it is awesome! Glad you got to play with one. When I first got mine, I engraved everything I could find (even a lemon).

[@PhilAndersonShadyAcresWoodshop]

Very cool! 😊

[@tuffymartinez]

Thank You Phil....Thank You LaserPecker 2.....I am surprised at the quickness, versatility, ease of use. You are going to have some fun Phil. I liked seeing some of your older turnings again. Soooo...ah..... thinking if mounted on the lathe ....and....ah...you turned the lathe on dead slow....than started printing.....no, no, no...don't go there Tuffy. I do not think that would work very well.....ah....but ????? Phil I am afraid that FUN Machine would quickly get me in trouble....? (But I would have FUN getting there, ha).....Until next time Phil......TM

[@michaelmcdermott2178]

Wait, Tuffy, I think you're on to something there!

[@PhilAndersonShadyAcresWoodshop]

Hahaha, I'll leave the shenanigans to you, Tuffy! I'd probably burn the shop down! 😊

[@patv6897]

Aille aille aille ! Phil, vous avez mis le pied dans un domaine tellement cool et intéressant qu'il peut devenir obsessionnel 😃😆🙃 foi de contaminé 🤣 Comme il complète merveilleusement notre activité de tournage, vous allez sans doute aussi vous prendre au jeu mais les journées... et les nuits risquent de devenir courtes ! Je suis sûr que vous nous surprendrez aussi en gravure-tournage. Une application "fil à brûler laser" ? Un "Outil à texturer laser" ? .. Les possibilités ne manquent pas et la focalisation de votre laser à 110 mm devrait faciliter les choses. Pour être complet il reste la CNC voire l'imprimante 3D ?! 😄 Régalez-vous bien et merci encore de toutes ces super vidéos. Patrick

[@PhilAndersonShadyAcresWoodshop]

Merci! On m'a proposé la CNC et l'imprimante 3D. Je ne voyais tout simplement pas en quoi ils intéresseraient mes téléspectateurs, alors je les ai refusés.

[@paulrapp6]

Phil, You are having too much fun! 😋 Keep the aspidistra flying! Paul

[@PhilAndersonShadyAcresWoodshop]

😊

[@lancerawlings5401]

That looks like fun! Great idea! Hooray for old school guys. I am 67 don’t know the difference between mm,cm or meter meters, as you said. Inches rule! Looking forward for next week Phil!

[@PhilAndersonShadyAcresWoodshop]

😊

[@LB-wo3uj]

Glad you had fun with it Phil, perhaps under your logo you should add 'Mask and face shield on' Hoping you get back to turning soon, once you have engraved everything :-)

[@PhilAndersonShadyAcresWoodshop]

I thought about Howdy in the middle instead of the shade tree. 😊

[@joesheble5458]

I've been using a LaserPecker for a couple of years now, to sign the bottom of my bowls, as well as custom engraving the inside bottom of the bowl as well. It's been a tremendous hit.

[@PhilAndersonShadyAcresWoodshop]

😊

[@carlspringle9342]

Totally cool Phil. I'm 63 and I believe when I was in elementary school we were the first class to be taught the metric system. I may be wrong. 10 millimeters equals 1centimeter. The days you can't turn can be the days you can burn. 👍😀

[@PhilAndersonShadyAcresWoodshop]

Thanks, Carl! 😊

[@wendyhenschel.]

I have been eyeing these up for the past month. Was hoping they would send to one of my youtube channels so i could see how it works and hear what they have to say about it. Thanks for sharing with us Phil. I do like it

[@PhilAndersonShadyAcresWoodshop]

It's so much fun, Wendy! 😊

[@judebrown4103]

Oh my, how much fun did you have with that Phil?! Excellent device... I'm sure I'm not the first to point out that you did all that with the safety glasses on the desk, you're such a rebel! 😂 👍

[@PhilAndersonShadyAcresWoodshop]

LOL! 😊

[@jimmy1dee]

As with every presentation that you do, excellent. While watching this I saw my dollar bills growing wings!! Thank you for taking the time to prepare this.

[@PhilAndersonShadyAcresWoodshop]

Haha, fun to use, Jimmy! 😊

[@lewisgreenway5065]

Wow talk about big boys toys, I really enjoyed watching you play with it, your comments while you experimented were priceless, good job Phil.

[@PhilAndersonShadyAcresWoodshop]

Haha, thanks, Lewis! 😊

[@markashlock9017]

Wow! Didn’t know something like that was available for the home shop. Thanks for the heads up and demo Phil! Well done!!!

[@PhilAndersonShadyAcresWoodshop]

😊

[@FrednDeeDee]

WOW!!!!! Phil, I'm also an inch guy and it's because I am a proud American. I fess up that I do have my set of metric tools so I can work on everything that's made in other than the US these days. I saved my coffee table and two end tables, and all three pieces look great now. Be careful with the modern technology Phil, soon there will be a machine that you throw a hunk of wood under the device, and it lathes and turns whatever you can dream up. Then what good are we then, as we become old and, in the way, replaced by a machine. About the only thing that is saving us now is the fact that we are so dang good looking.

[@PhilAndersonShadyAcresWoodshop]

LOL! Ok, Freddie, that works for me! 😊

[@williamellis8993]

I think you were having waaaay too much fun, Phil (lol). Seriously, it works great and I'm sure you'll get a lot of good use out of it. I'm amazed at how simple it was. Bill

[@PhilAndersonShadyAcresWoodshop]

Me too, Bill! 😊

[@bobcrabtree6924]

Phil, As always a very interesting and informative post. As I said before you have a way of presenting things that make it easy for folks to understand. Now I want one of those very much! Keep on keeping on my friend.

[@PhilAndersonShadyAcresWoodshop]

Bob, you NEED one of these! 😊

[@argusfleibeit1165]

Wow. For a "mature dog" you sure learned a bunch of new tricks, pretty fast. I am impressed. How fun!!. I still struggle with the metric system, that they tried to teach me back in probably 1965. It just doesn't stick, can't envision it. Distance, temperature, weights and measures-- forget about it. That's what happens when it needs to be adopted by the entire country and everybody just resists and ignores it. I even made and effort to learn, and, NOPE.

[@PhilAndersonShadyAcresWoodshop]

Just "NOPE" here, too! 😊

[@kelvincolemanAnimal]

I have wanted one of them for a long time Phil and after seeing your demo I’ve got to get one now thanks for the video I absolutely love it. Take care my friend 👍👍👍😊😊😊♥️

[@PhilAndersonShadyAcresWoodshop]

They are fun, Kelvin! 😊

[@hotrodhog2170]

Wow! That's really cool! Sadly I can't afford something like that at this point though but it looks totally fun to play with!

[@PhilAndersonShadyAcresWoodshop]

C'mon over, we'll play with it together, Hotrod! 😊

[@hotrodhog2170]

@@PhilAndersonShadyAcresWoodshop You know, if gas prices weren't so sick right now, I'd totally take the 4 day drive over! Haven't been to the West coast in 20 yrs.

[@dennisoliver6421]

That looks like so much fun I would be playing with it instead of turning! Great job Phil.

[@PhilAndersonShadyAcresWoodshop]

That's what I'm afraid of, Dennis! 😊

[@maudwelford1843]

Hi Phil your like a boy with a new toy! Well done! superb!😍😍😍🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧

[@PhilAndersonShadyAcresWoodshop]

Fun to play with for sure, Maud! 😊

[@donaldadams5342]

Very cool piece of equipment & a great learning demonstration to go with in the typically cool Phil Anderson way we all know & love. Thanks for sharing & I am sure all your followers will be looking forward to your next demo video. Stay cool my friend, Don from South Aust.

[@PhilAndersonShadyAcresWoodshop]

Cool as a cucumber, Don. 😊 Thanks!

[@jimneely4527]

This is what you get when you make videos of your work and share them with all the world to enjoy. You rock Phil!

[@PhilAndersonShadyAcresWoodshop]

Haha, Thank you, Jim! 😊

[@bretteee]

Makes a nice change from the lathe and that Lazer engraver looks really cool " did I notice you handling another stone" I'm sure there is a little bit of stone mason in you . You will be turning them next , hahaha. Great to see you looking well and thanks for finding the time to do a video , I know you have a lot of appointments at the moment ,stay safe and well and looking forward to seeing that Lazer on the lathe 🪵🪨👍

[@PhilAndersonShadyAcresWoodshop]

Yes, I engraved a stone, Brette. 😊

[@alinmayerthorpe7801]

That looks like fun and easy to use! I sure did a great job engraving your turnings! Well done Phil and thanks! Cheers Al

[@PhilAndersonShadyAcresWoodshop]

Thank you, Al! Cheers!

[@KarlBunker]

Thanks for the video, Phil; this was interesting and lots of fun. I use a a regular X-Y axis laser engraver to put my logo and URL onto my finished pieces. Sometimes I have to rig up some "stilts" to hold the engraver above the bottom of a bowl, and your device (with the unfortunate name 😊) looks a lot more convenient for that sort of thing. I'd say "have fun with it," but clearly you already are. 😀 Kudos to LaserPecker for gifting you this neat device!

[@PhilAndersonShadyAcresWoodshop]

I do think it's going to be a fun little gadget, Karl. I'm glad you figured out a way to use yours for your logo. Just seems like the way to go! 😊

[@huberthicks9080]

Happy Father’s Day, Phil. Enjoy your day, my friend.

[@PhilAndersonShadyAcresWoodshop]

It was a good day, Hubert, thanks! 😊

[@josephpotterf9459]

Sorry i laughed at your math but have a deep understanding of not understanding that kind of stuff as well great video Phil thanks you cheered up my evening.

[@PhilAndersonShadyAcresWoodshop]

LOL!

[@GordonRock1]

Very cool new toy, I mean tool, Phil. That looks like a lot easier than the one that was offered to me last year. I turned it down because I didn’t want to hassle of assembling something. This one I think I might have excepted gladly. Great video, my friend. Thanks for sharing! Take care, …..Gord

[@PhilAndersonShadyAcresWoodshop]

It's definitely a lot of fun, Gord. They have a power pack for it to make it portable. Take it outside, carve your initials into a tree! LOL! Thanks, buddy, hope all is well! 😊

[@jonmartineau1004]

How cool is that Phil ! It looks so useful and fun too . Thank you for sharing .

[@PhilAndersonShadyAcresWoodshop]

😊

[@PotgieterWoodturning]

Yes, this is different to the norm, but enjoyable. Thats a neat little toy Phil and I can see you gonna have a lot of fun with it. Thanks for sharing it with us.

[@PhilAndersonShadyAcresWoodshop]

😊

[@richardovind3348]

Great Demo, Love your new toy!! You commentary about the metric stuff was a hoot too. Your videos are fun to watch and always bring a smile!!!

[@PhilAndersonShadyAcresWoodshop]

I'm so glad, Richard, thank you! 😊

[@gwynnfarrell1856]

How cool! I love it! (In case you haven't figured it out yet, each tiny mark between the numbered marks is a millimeter. 10 millimeters equals 1 centimeter. The numbered marks therefore are centimeters. 4 centimeters equals 40 millimeters, 3.6 centimeters equals 36 millimeters.) Have fun playing! I sure enjoyed watching you! 😊

[@PhilAndersonShadyAcresWoodshop]

I really don't want an explanation but I'm thinking maybe why this doesn't make sense to me. Why do the instructions say "must be 110 mm distance from laser?" Why don't they say 11 cm? Just doesn't work for me! 😊

[@gwynnfarrell1856]

@@PhilAndersonShadyAcresWoodshop I think it's a usage thing, which I don't understand either. 🤔 As long as it's fun that stuff doesn't matter!

[@local120]

I found your channel a few weeks ago. I just started turning since retirement. Your videos are a huge help in solving problems I run across. Thank you so much for sharing as well showing your humility when you make a mistake. As the late great drummer Neil Peart said. “There’s are no mistakes, just new parts”. Thank you again.

[@PhilAndersonShadyAcresWoodshop]

Thanks for spending some time with me! 😊

[@ThePapa1947]

That is so cool Phil. And it really does look like it has plenty of uses. Last year I was offered a different laser engraver. It had to be assembled and it did not look friendly for a wood turner. For sure this one looks perfect. Thanks for the video and showing all the cool things that it can be used for. Take care, Gary

[@PhilAndersonShadyAcresWoodshop]

I think I got offered the same one, Gary. Couldn't figure out how it would be useful in turning and, no place to put it! LOL! This one is very versatile and fun to use. Thanks for watching and commenting, buddy! 😊

[@ThePapa1947]

It sure does look very useful, now I need to wipe the drool off my face!

[@wesleyhanna1124]

That is so cool Phil! I really like the roller attachment. My creative juices really got going thinking about that! I've seen the LaserPecker before, but didn't know about the roller attachment. One day soon, hopefully, I'll have one.

[@PhilAndersonShadyAcresWoodshop]

😊

[@erniesmith1097]

Howde phill it just goes to show that your never to old to learn new skills, tricks and tips. That's your best video every.Ernie smith from brisbane Australia

[@PhilAndersonShadyAcresWoodshop]

Thank you, Ernie! 😊

[@tompuskar4426]

That's a really cool gadget, Phil. Thanks for sharing it. A bit pricey for my shop but maybe I'll convince myself I deserve a father's day present. Problem is I'll probably get hooked on it and not do the turnings I need for my craft shows!

[@PhilAndersonShadyAcresWoodshop]

Haha, it does occupy my mind, Tom! 😊

[@kenvasko2285]

Good video. I could hear in your voice you were having fun. I took the plunge and bought one. Let the adventures begin. Thanks for giving me the confidence I could do it.

[@PhilAndersonShadyAcresWoodshop]

Probably the easiest to use laser, Ken and so much fun, too! 😊

[@thomaskuzia8125]

Hi Phil, Who said you can't t each an old dog new tricks! LOL I'm a tad older then you and never was taught the metric system either. I had to learn it in work cuz we made machines for customers worldwide but I still don't like using it. I bought a laser engraver about 2 months ago and (like you) have been engraving everything that aint nailed down! LOL Wood,ceramic tiles,glass,slate,leather,cardboard and probably more things I can't remember right now! Mine has software that's more difficult to learn then yours is but hey,,,,why not at least try to learn it? I get lost with different types of files,,,raster,vector And other words I didn't know existed before! LOL One thing I do have over you though,,,,my software converts metric to inches with one single click! LOL Glad to see that your still pushing your brain to the limit,,,I know I do! LOL Thanks for the video,,, Tom

[@PhilAndersonShadyAcresWoodshop]

Sounds like you have eased into the age of lasers with style, Tom! I know what you mean about engraving everything in sight! LOL! I've been told they are updating the software and I already put in my request for the inch conversion. I don't mind learning new, useful stuff but, metric just ain't useful to me! 😊

[@daveb.misc.2589]

yes siree Phil. im almost 69 years old, and wasnt taught metric measurements in school either. i was married to a nurse, and, of course, she had to learn them, but she wasnt patient enough to teach me. hmmm🤔 well anyway. it looks like a cool toy, tool, whatever. i think the zombie woodturner has the laser pecker brand also, and he uses it on the lathe. looking forward to seeing you use that out in the shop!👍

[@PhilAndersonShadyAcresWoodshop]

Cool, thanks, Dave! 😊

[@ahsquared1]

That's really cool Phil! It looks like a lot of fun.

[@davidwise5834]

Hi Phil How much is tfat lazer ingraver and were can you get it l am in Canada.😂

[@PhilAndersonShadyAcresWoodshop]

😊

[@PhilAndersonShadyAcresWoodshop]

Links in the description, David.

[@smallnepal8604]

That's amazing! Don't forget the safety glasses!

[@PhilAndersonShadyAcresWoodshop]

😊

[@TripleG69]

Oooh lotsa playing ahead. A small logo allows you to still also sign. Thanks for sharing. Hugs

[@PhilAndersonShadyAcresWoodshop]

😊

[@AlienLeader4]

That is awesome Phil. I know you are gonna love that new tool, because you are already having a blast. Can not wait to see what you make with it next. Thanks for sharing.

[@PhilAndersonShadyAcresWoodshop]

😊

[@butchiechill8637]

Never to old to learn something new looks like you are having fun with it

[@PhilAndersonShadyAcresWoodshop]

😊

[@orneinarsson9093]

Phil. I hve been following you for a long time. I like a lot your videos, it is almost like I knov you. And your works are beautyful. I used to turn but no longer have the power in my arms so wathing turning is a great hobby of mine!

[@PhilAndersonShadyAcresWoodshop]

Wow, thank you, Orn, I'll try to keep it interesting! 😊

[@barrythompson7305]

I WANT ONE......!! I have a branding iron which my daughters bought me which I love (because my daughters bought it, obviously!!), so I would be very reluctant to change it........But.......this looks really good!! I clearly need to research this. Thanks Phil. As always. Your insight into metric measurements and technology leaves me breathless 😀😂😂

[@PhilAndersonShadyAcresWoodshop]

LOL!

[@dennisyoung2774]

Hi Phil. Good to see you keeping busy and learning something new-always a good thing. That sure is a neat engraver would have many uses in the shop for sure! Only limited by your imagination. Thanks for the interesting demo. See you in the next one no matter the content, it’s always very informative. Take care and stay well.

[@PhilAndersonShadyAcresWoodshop]

Thank you very much, Dennis! 😊

[@carolyngreen1673]

Lol, Phil ! I'm right there with you. I don't get metrics or computer technology. I'm to old to teach this old dog a trick!

[@PhilAndersonShadyAcresWoodshop]

Peas in a pod, Carolyn! 😊

[@tomjpt]

You said it "How Cool Is That!". And, as always, your video was a super learning opportunity. On something I have been considering even. Very, very helpful to see and hear your experience with this new tool and from someone I trust! How cool is tthat! Tom

[@PhilAndersonShadyAcresWoodshop]

Very cool, Tom! LOL! Thank you my friend! 😊

[@brentmoyer2081]

What the heck phil. You are branching out. I LOVE IT!!

[@PhilAndersonShadyAcresWoodshop]

😊

[@rayworstine4399]

Good evening, Phil. Wowzer, that is a very impressive tool. You did a wonderful job of demonstrating the possibilities this tool can be used for. Even portable. I checked the amazon link. Thanks for giving us something to think about.

[@PhilAndersonShadyAcresWoodshop]

Ya know how you used to carve your initials into the tree with your girlfriend, Ray? This will do that with style! LOL!

[@rayworstine4399]

@@PhilAndersonShadyAcresWoodshop Now that's is an application I didn't think about. Well done, Phil.

[@garthkeck2003]

Every boy needs a new toy now and then. Looks like this will be useful.

[@PhilAndersonShadyAcresWoodshop]

😊

[@jamesfreeman5853]

Boys, and their toys! You will have a lot of fun with this, I am sure. Enjoy!!!

[@PhilAndersonShadyAcresWoodshop]

😊

[@sabrina-wq4uu]

So much fun! I don't think I would ever stop!😁

[@PhilAndersonShadyAcresWoodshop]

I understand, Sabrina! Take it outside and engrave the trees. It has a battery pack you can buy. Take it to the park and sign the benches! LOL!

[@josephcote6120]

What a fun little machine. I always liked when folks used a woodburning style branding stamp, great effect, but it also always seemed a little lopsided when done. This is a similar effect but done neatly.

[@PhilAndersonShadyAcresWoodshop]

😊

[@nancygibbs4841]

You’re right way cool. It will be fun to watch a turning and then the laser. Thanks for sharing your new fun tool.

[@PhilAndersonShadyAcresWoodshop]

😊

[@kersi-sandiego6036]

Phil The Laser Guy! Nice gizmo. Thx Phil.

[@PhilAndersonShadyAcresWoodshop]

That's me! LOL!

[@cosmocavicchio5252]

New toys are always fun. And this one is practical. Cosmo from Billerica, MA.

[@PhilAndersonShadyAcresWoodshop]

The best combination, Cosmo! 😊

[@user-ml3hl6vr4t]

Man, you have the coolest useful toy!!!!! Yet another thing to add to my drool list, I grew up next to Canada so I do metric universal useful bit--25 millimeters is 1 inch, roughly. 100 mm is 10 cm is 4 inches. That little bit will sort most of it for you. Blegh-math. Just green with envy. New cool tool drooling going on here.

[@PhilAndersonShadyAcresWoodshop]

Thanks, D! 😊

[@allegg8804]

So good to hear your voice. Thank you.

[@PhilAndersonShadyAcresWoodshop]

😊

[@SiamWoodShop]

Great video Phil, this sure looks user friendly compared to some I have seen advertised. I'm sure the sales of thls laser will rocket now you have shown what it can do. Take care, John

[@PhilAndersonShadyAcresWoodshop]

Haha, thanks, John! 😊

[@nigelharvey210]

seeing you struggling with the metric measurements did make me laugh (sorry). but i have decided i dont want one of these i need one of these, you are a great guy and i love the way you make a masterpiece out of anything you pick up. i love the way you talk to us and and listen to us when we change your mind. keep doing what you are doing because we love you for doing so

[@PhilAndersonShadyAcresWoodshop]

So nice of you, Nigel, thank you! 😊

[@dcwander7092]

Yup, see how very creative you are when inventing new video strategies for your channel. Congratulations!

[@PhilAndersonShadyAcresWoodshop]

Thank you very much! 😊

[@jayscott306]

Phil, that was so useful! I always thought engravers like that were better suited for larger budgets than mine or for a production business. This had me interested even before you brought out the rollers. Your experiences live are much more revealing and helpful than a scripted review. Good job working out the metric. It's a great system but I'm fully aware of the unique benefits of each system. My father is your age. In his shops, and those of friends and relatives, I learned Imperial. I was in the class of the second year metric became standard curriculum in Canada, so I had the benefits of both systems. I'll admit that I alternate between them, quite a bit. Now, gotta go look at more info on this LaserPecker.

[@PhilAndersonShadyAcresWoodshop]

Thanks, Jay! I hope you can obtain one, they are fun! 😊

[@AnnaAnna-uc2ff]

That is the coolest thing I've seen this year.

[@PhilAndersonShadyAcresWoodshop]

Me too! 😊

[@JohnWilliams-iw6oq]

I'm not going to comment on the name but I had a great laugh. It looks great Phil thank you.

[@PhilAndersonShadyAcresWoodshop]

😊

[@keithmetcalfe3990]

That’s added to my wish list, thanks Phil, take care👍

[@PhilAndersonShadyAcresWoodshop]

Good choice! 😊

[@DougMilleratWoodSpunRound]

Fun first uses. I’ve thought about Laser Pecker for a while now. Was about to pull the trigger when I left my pastorate. This looks really great. Looks like you picked up on the programming very easily. Very intuitive I assume. Everything you did looks great.

[@PhilAndersonShadyAcresWoodshop]

Easy to use, Doug. They are coming out with better software in a couple months, too. 😊

[@PBUCKY1969]

Cheers for showing us this Phil it's a really cool piece of kit - now you made me want to go and buy one!

[@PhilAndersonShadyAcresWoodshop]

😊

[@rogerjohnston9545]

Oh no, another delivery coming ny way. Thanks

[@PhilAndersonShadyAcresWoodshop]

You’re welcome 😊

[@lindabrown2211]

I like the Lazer you just showed in this video. Thanks for sharing going to add this to my wish list.

[@PhilAndersonShadyAcresWoodshop]

It's a lot of fun, Linda! 😊

[@simondawson2978]

I can see you having lots of fun with your new toy.. 😉

[@PhilAndersonShadyAcresWoodshop]

😊

[@jimfisher5201]

Great demonstration Phil, it certainly does look very useful and loads of fun, might have to start hinting what I’d like for Christmas. All the best to you. Regards Jim

[@PhilAndersonShadyAcresWoodshop]

Great idea, Jim! 😊

[@markr3547]

New toys are always fun .

[@PhilAndersonShadyAcresWoodshop]

For sure! 😊

[@doreenwatson-read]

Oh wow, I need one of those in my life. please do some more sruff. that was fun to watch

[@PhilAndersonShadyAcresWoodshop]

Yes, yes you do, Doreen! All of a sudden, everything looks like it needs your name on it! LOL! You can even run it off a battery that they have. Take it to the park, autograph the benches! Hahaha!

[@josephsmith452]

Great video Phil. Super cool engraving and no dust or shavings to clean up.

[@PhilAndersonShadyAcresWoodshop]

Yeah! 😊

[@bryanhowland8772]

Very cool!! Also a really neat wooden stick to measure things with 🤣.

[@PhilAndersonShadyAcresWoodshop]

😊

[@mikepetitt9624]

Wow this is really cool! I got a shampoo CNC machine to play with a rear ago and had just found out they had a laser attachment for it. This thing though seems a lot easier. Thanks a lot for showing us this new toy!

[@PhilAndersonShadyAcresWoodshop]

😊

[@grammybear4226]

🐼 Big Bear Hugs from a 68 yr old grandma in Kirby, Texas, USA 🐼 ❤ 🎀 ❤ 🎀

[@PhilAndersonShadyAcresWoodshop]

😊

[@DarnWhippets]

man, thats a handy piece of kit. Thanks for demoing it, Phil.

[@PhilAndersonShadyAcresWoodshop]

😊

[@onetruesmugs]

Just so nice to see you having some fun, Phil, love it :D

[@PhilAndersonShadyAcresWoodshop]

Always! 😊

[@chrisjohnston2449]

We have a laser from another company They sure are a useful tool. Now if this one can be used right on the lathe....that is a game changer. I can't wait for the next video

[@PhilAndersonShadyAcresWoodshop]

Thanks, Chris! 😊

[@tinaharbit1806]

That is so very awesome! So glad to see you having fun with a new gadget!

[@PhilAndersonShadyAcresWoodshop]

I love it! 😊

[@huberthicks9080]

Going to have to take a serious look at this. Thanks, Phil.

[@PhilAndersonShadyAcresWoodshop]

Lotsa fun, Hubert! 😊

[@morgancalvi6675]

LOL...a new toy! You do amazing work...keep the creativity up. I hope you had a lovely holiday week end.

[@PhilAndersonShadyAcresWoodshop]

Same to you, Morgan! 😄

[@morgancalvi6675]

@@PhilAndersonShadyAcresWoodshop I did, thanks.

[@stephendonathan6782]

I agree with you that would be great for any woodturner. Thanks for sharing! Take care and GOD BLESS 🙏!

[@PhilAndersonShadyAcresWoodshop]

😊

[@johnwhite6899]

🙋‍♂️🏴󠁧󠁢󠁷󠁬󠁳󠁿 Hi Phil you and I are the same age and I also have trouble with metric sizes can't picture what 10 cm is I know what 4 inches is. Now I understand why you kept us in suspense with your signature last week but we'll worth it. I'm glad that you embrace new technology I love it . Really useful laser printer pity I didn't have one to burn my name in my tools my daughter has borrowed most of mine ha ha. Cheers Phil.

[@PhilAndersonShadyAcresWoodshop]

Haha, you'll get them back, John! 😊

[@brendadriver2702]

Looks like a fun, but useful tool. Thanks for sharing. I wish I could afford one! Boy could I go crazy with that!

[@PhilAndersonShadyAcresWoodshop]

You and me both, Brenda! Everything should be engraved! 😊

[@leonasamuel7791]

Well, what a fun new toy!!!

[@PhilAndersonShadyAcresWoodshop]

For sure! 😊