KZbin has not been sending me any of your new videos on my feed for the past year....damn. Welcome back, good to see you experimenting again!
@Miley_002 жыл бұрын
Wow I was just thinking about you yesterday! Glad to see you are still working on your projects! I love my backpack solar panel I bought from you.
@lasersaber2 жыл бұрын
That is awesome!
@hippie-io72252 жыл бұрын
@@lasersaber That thought stream must be in the ether. Wondering where and how you are,.... and thinking of Atmo!
@peterlang7772 жыл бұрын
make a graphene hematene water powered battery!!!!
@Thru_Mind_I2 жыл бұрын
How can you charge battery with this? Is it hooked up to inverter like solar panels?
@kbcovingtonsr Жыл бұрын
Backpack solar panel? Lemme see.
@johnhosky29312 жыл бұрын
Good to see ya posting again!
@lasersaber2 жыл бұрын
More to come!
@danmurphy56602 жыл бұрын
So good to see you back man
@milkrecu2 ай бұрын
Your ingenuity and thoughtful engineering is inspiring. Thank you
@electronicsNmore2 жыл бұрын
You did a really great job making that motor. Very cool.
@lasersaber2 жыл бұрын
Thank you!
@matthewh46848 ай бұрын
Bloody incredible. I've been doing experiments with grounded magnets in repulsion but this.. is something
@maherph54892 жыл бұрын
Long time glad you are back
@lasersaber2 жыл бұрын
Glad to be back.
@drbahb12 жыл бұрын
Happy to see you back. Love the new logo.
@hurdlerdude13372 жыл бұрын
Been out building, feeling and thinking. Welcome back Lasbersaber!
@il51diablo2 жыл бұрын
wow! You started with this in 2013! It is abused ! I remember it like it was yesterday...
@spark31672 жыл бұрын
You're getting there. keep it up!
@lasersaber2 жыл бұрын
Thanks, will do!
@codemontana Жыл бұрын
This man’s a treasure, great content much appreciated
@trueherbsman2 жыл бұрын
keep that spirit flowing man! you're an atmospheric master (Y)
@chelsona25742 жыл бұрын
im so happy to see you back on here!!!!
@joshuameldru40042 жыл бұрын
So glad to see more of your fantastic work. Your channel is one of the reasons I love to look at KZbin! Thank you sir
@joshua28122 жыл бұрын
Wow. This is so cool. As said by many of us follower's, glad to see you back at it. Love your videos. Keep them coming.
@dans-designs2 жыл бұрын
I love it!!! I think the best way to retain the RPM but also generate power is to attach the magnets directly to the existing external rotor (near the needle) and position coreless coils around them.. you could even combine axial and radial magnets and coils to almost quadruple the output!
@chehystpewpur4754 Жыл бұрын
what you need is a flywheel not a draw. flywheel weight is proven tech and yes it takes more to start it but once its going it doesnt wanna stop.
@colleenforrest79362 жыл бұрын
Hey, you're back! Great looking at atmo motor!
@neoterra70727 ай бұрын
Very Cool! Looking forward to seeing your larger motors.
@bringer-of-change2 жыл бұрын
Definitely awesome man. Wireless power is the bees knees
@danielsimpkins96622 жыл бұрын
We need you back posting regularly! It's April 1'st and there's no Dr. Lirpa Sloof video! We NEED Dr. Lirpa Sloof videos!
@cboy-ou2hr2 жыл бұрын
Welcome back
@ShafaqIftikhar-pw9ld Жыл бұрын
Absolutely beautiful compilation!!!!!!
@overunityinventor3 ай бұрын
if instead of running load directly from static electricity, you step up using a transformer, it will make bigger load run and current draw from atmosphere will increase, means for us this step up will be free
@joelsoncdma9 ай бұрын
Energy is amazing...and beautifull efect
@NandR2 жыл бұрын
Man I love these motors. I’m amazed at how much energy they are able to harness. Would love to it on the sky wire.
@TheSonichedgehog82 жыл бұрын
Holy shit, a laser saber video owo
@aseriousinquiry84254 ай бұрын
At the end, I was reminded of Emperor Palpatine.
@chance19862 жыл бұрын
What an incredible demo! And thanks so much for posting the details. I love your channel. Wish you posted more content. Looking forward to the aerial tests.
@masterxofficiel3 ай бұрын
Wonderful innovation 🤩❤️
@GasGiantMoon2 жыл бұрын
Look Who's back ;)
@producernemo70352 жыл бұрын
holy shit dude, youre like one of the coolest dudes alive. like for real. you are making magic, you have super powers, almost a sith lord at the end ahaha
@SSingh-nr8qz2 жыл бұрын
This is one of the coolest things ever! I would love to see how well this scales and have you ever thought of seeing the effects of an improved collector array to pump into the AtmoMotor? This project seems to be a 2 part system rather than just the motor itself but finding a way collect energy from the atmosphere as well.
@ricohhobrasil95912 жыл бұрын
Very, veery cool, hug from Brazil !!
@jcwdenton Жыл бұрын
Your channel is the best
@user-wy3xe2tt3y2 жыл бұрын
02:37 👍🧐That reminds me of Spock aligning the dilithium crystals on the Starship Enterprise... “ I am and shall always be your friend LaserSaber”
@KangJangkrik2 жыл бұрын
Will this thing extract power from atmosphere with kite? How many watts? I'm curious
@christianpaulroldan401011 ай бұрын
Thats amazing
@eleos52 жыл бұрын
The future is bright
@sebastianharrison61182 жыл бұрын
This is amazing keep up the good work
@QuantumLightTV2 жыл бұрын
As always, a great video. I love your commitment to experimentation.
@prioritytree2 жыл бұрын
Wow very inspiring. Right on !
@power-max2 жыл бұрын
Can you measure the efficiency of the motor? Or the power output? And power input? Might involve some high voltage probes, the highest impedance ones you can get, a regulated HVDC power supply, and microcurrent meter. Not sure of a good way to measure output power with any sort of accuracy though. The idea of a motor that uses electric fields instead of magnetic fields is fascinating as well. Can you turn the shaft of it and have the motor generate high voltage? It looks similar in construction to a Wilmshurst machine.
@lukehanlon99652 жыл бұрын
Absolutely Awesome! Thanks👍
@imaginarypoint2 жыл бұрын
at about 1:50 into the vid. On the table. If you add a second motor#2... will the speed on motor#1 decrease? Or will it stay the same.. motor#1 and motor#2.
@BillHallProductions2 жыл бұрын
Question. If you turn a corna motor by does it work as a static genartor in the same way a magnet motor works?
@dhamapaudyal95592 жыл бұрын
It look amazing
@Isimplydoes4 ай бұрын
Your arm hair standing up is hilarious
@Allan_aka_RocKITEman Жыл бұрын
@lasersaber >>> 👍👍
@googletropcurieux8670 Жыл бұрын
this is so cool
@danigkittystarfly2 жыл бұрын
Youre inspirational man
@MusicSoundPlayer2 жыл бұрын
Very inspiring. Thanks!
@alexandermcalpine2 жыл бұрын
Awesome!
@moonfther2 жыл бұрын
Very cool!
@mximusprime21052 жыл бұрын
НЕВЕРОЯТНО!!!
@cryptoalchemist3692 жыл бұрын
Hey brother! You are about as awesome as they come! Your work is a major inspiration in my own. I am currently doing a video series with the Hutchinsons and the Crystal battery build. We'd love to have you on a video call together with them sometime if possible. They love your work, and it be an honor and asset to have your experience with the Crystal battery builds over the years. also I absolutely am fascinated with atmospheric electricity, and you are literally leading the way! I'm going to get the design to my friends with 3d printers! much love and respect
@damedesmontagnes11 ай бұрын
So how do you power devices or charge batteries with this? Do you have a video explaining that? Thanks.
@2bertoldo2 жыл бұрын
is the bug on the rotor stuck? how many gravities did it have to endure?
@the_natrix9959 Жыл бұрын
Could you add more rotational weight? If the aluminium/plastic cylinder were heavier would it still function?
@aseriousinquiry84254 ай бұрын
Should you watch out for ozone production from the corona?
@FreeKanal Жыл бұрын
U can put blades to the freezer so u will put the plastic caps easier
@iimppy2 ай бұрын
Can you try to wrap copper wire around the motor to collect electricity to a point for collection?
@R2NOTU Жыл бұрын
Hi what about battery charging or supercap charging.there using graphene strips on the top of the wire in the air really busts the input..why not a balloon ? They used to put radiom chloride on the aluminum balloons . If you could charge a battery. That would be so cool ..how do you avoid lightning strikes.?
@Maxim.Teleguz2 жыл бұрын
What about running it with a focused fresnel lense would that slow it down or speed it up? Would heat make it run better or worse.
@lasersaber2 жыл бұрын
I have not tried that. I did testing with flame in the past. Check this out: kzbin.info/www/bejne/jIG4Xp6lYpaUnck
@dogodogo58912 жыл бұрын
hi do you thinj corona motor gave us higher potential at triggering lightning? i would like to doing some experiment regarding lightning bolt i knew safety measure
@Lexx-Luter10 ай бұрын
Увеличь рабочую площадь. Можно сделать параллельно набранные диски и инжекторы между ними. Но при увеличении площади вырастет и мощность двигателя, а это значит, что источник высокого напряжения тоже должен быть мощнее.
@R2NOTU Жыл бұрын
Hay use the defection power to run a off set gavity wheel . keeping the wheel off balance by static repulsion
@jarusRnD15 күн бұрын
Hi Mr. lasersaber, I’ve been following your incredible videos on supercapacitors and truly admire your expertise. My client is exploring large-scale supercapacitor manufacturing, and your insights could be invaluable. Specifically, we’re curious about scalability (large units vs. clusters), real-world performance vs. traditional batteries, and challenges in production. Would you be open to a quick discussion? Looking forward to your response!
@jachmantis2 жыл бұрын
Love it, wouldnt it be something to run some small lights permanently off one of these? Keep being awesome!
@jamesgray4037 Жыл бұрын
Is there a way of making a powerstation sized vandergraff and an Ariel big as a radio mast
@chrispotts722 жыл бұрын
Are you hoping to scale up? If you get enough altitude on your aerial it should be able to power some good small electronics!
@radwizard2 жыл бұрын
Far out! Hamilton Morris pointed this channel from his patreon. I've you subbed for years. :)
@afsdsasasf2 жыл бұрын
Can u attach this to a weather ballon to harvest electrons from clouds before it becomes thunder clouds?
@TheScottsawesomeart Жыл бұрын
iv bn watching you for very long time , are your crystal battery's still going strong?
@icebluscorpion11 ай бұрын
With this insane torque and RPM you could turn a N-Machine AkA Homopol generator and connect the Atmospheric motor electrically in series with the N-Machine such that the N-Machine gets electrostatically charged and every time it discharges a huge current from the N-Machine takes over
@fookingsog2 жыл бұрын
Super Cool!!! How much Ozone production are you experiencing with that amount of coronal discharge???🤔
@lasersaber2 жыл бұрын
I have no idea, but I can smell it.
@SaltGrains_Fready2 жыл бұрын
@@lasersaber every molecule of O3 at this atmospheric pressure level turns into 3 o2's in about 20 seconds. That's safe in your small environment with fresh oxygen and disinfectant power. On the other hand, if you were discharging huge capacitors with large arcs continuously, that would be totally different since the o3 would then saturate the space around you faster than it can break down to 3 o2's for each molecule. Also high moisture levels can interact with it and create a chlorine odor in that situation. People get this little HV electrical ozone confused with the toxic Chemical ozone created by noxious gas pollution & smog at higher altitudes which is completely different and poisonous.
@canuckcanuck341510 ай бұрын
hi my name is Chris edwards I talked with you a couple years ago , I would like to build the soln 2000 , could I get links to the build . or where to sign up to get one 😁
@briandolata3466 Жыл бұрын
what would I need to do to get 240 volts and 200 amps for my breaker box in my house
@1015KillAtron Жыл бұрын
does is smell like Ozone when you have the motor running?
@AozaVerba11 ай бұрын
Wow! Tnx.. ❤❤❤❤❤❤
@ExSparticus2 жыл бұрын
Have you used a capacitor like a Leyden Jar to build up the charge?
@sunnyoutside5288 Жыл бұрын
How much voltage can you get strictly from the atmosphere not the motion of the motor
@ollehogberg43682 жыл бұрын
Can it drive the hand crank generator in your previous video?
@deanjvr8390 Жыл бұрын
What happens if you rotate he motor physically, does it generate a charge?
@andrewharbit7449 Жыл бұрын
I wonder if you were to seal the motor and fill it with an inert gas, neon, xeon, argon. This should eliminate ozone generation while also being a dry atmosphere the static charges would induct better as I understand.
@elnatura21304 ай бұрын
have you measured the output power torque?
@jasonburguess Жыл бұрын
I wonder if you could scale this up with steel pipe and fittings and a large rotor out of an old electric motor, big bearings etc.
@piconano2 жыл бұрын
How have you been? So nice to see you back at it again. This new design blows me away! It looks amazing. Well done. Have you ever verified Tesla's patent US685957A? When I remodeled my last house, I wanted to cover the outside new wall with overlapping aluminum foil over the house wrap, and run a wire to the basement for experimentation, before the vinyl guys showed up to install the vertical 1x3 nailers, before installing the vinyl siding. Sadly I didn't do it and regret it to this day. I was exhausted as I did all the framing and remodeling. I wanted to test Tesla's fig-1 circuit. I think your motor+generator would run pretty nice on such a system. I can't wait to see your next video.
@lasersaber2 жыл бұрын
Doing well. I am familiar with Tesla's US685957A patent. I have not really tried to replicate it yet. Hopefully I will get the opportunity at some point in the future.
@piconano2 жыл бұрын
@@lasersaber ♥
@SINANOZYOLDAS5 ай бұрын
I am ready to carry out the electricity generation project with angular resonance together with investors who agree to make an official protocol. I have worked for 15 years for this project. After the official signatures are signed, everything will be done openly.
@BenjaminSteber2 жыл бұрын
Years and years ago I saw a discovery channel special that claimed to have built an atmospheric electricity harvester engine into a mail truck, along with storage. They tried to race it and first the engine broke the drive key to the wheel. The second try they shredded the drive belt. Not sure if the truck was real or a sham but I’d be glad to find out it was true.
@edwardkamenar14939 ай бұрын
So I'm still trying to figure out how it works? Details please.
@classic_sci_fi Жыл бұрын
How much power can be generated from the atmosphere? How many watts?
@sataysenoi Жыл бұрын
Aeroplane using free energy without fuel on air.. Thanks for the information
@oieieio7412 жыл бұрын
awesome
@mixpixmixable2 жыл бұрын
How can I get electrode?? What is name of electrode?.? I want to make corona motor :)
@martinrochejocquelein1772 Жыл бұрын
I wonder if you can charge a twelve volt set of capacitors ..if it will recharge capacitors it can be used to recharge batteries ..or even run twelve volt motors ..example running a ev bicycle or disability scooter..
@crafter2u Жыл бұрын
i wonder how big you would have to make it to power your home
@jacobellinger80272 жыл бұрын
does lightning ever make it turn a little?
@buteomont2 жыл бұрын
This is excellent work. You seem to have optimized it to a very high degree. Have you experimented with different aerial collection designs? I also noticed that your little stinkbug buddy was enjoying the ride at 1:27 lol. You must live in the South; those guys are everywhere!