Launching NEW BAIT MOLDS!! 2.8" Rip Rap Swimbait & 6" BOT Worm

[@WorldsWorstFishing]

Links for new molds!! Merry Christmas anglingai.com/2-8-riprap/ anglingai.com/2-8-riprap-tail-mold/ anglingai.com/6--bot-worm/

[@lukerobinson4468]

Thanks for the content, I would like your opinion on what the best plastic I can use to make all my baits. Your videos inspired me to begin bait making.

[@tphvictims5101]

You do some beautiful pours. I stopped buying most of my lures from the big companies and started buying from knock-off sellers. I am very happy with that choice. I buy Z Mann from Z Mann though. Great videos don’t kid yourself 👍🏻

[@bb8989-g4p]

Do you have a video or any tips on clean up? I have the MOJO open pour, and the flat end corners of the worms are always uneven. I can never get the corners to be perfect on the flat side.

[@garybowers9605]

For getting the tails into the Rip Rap mold, I use a Q tip. Dip the Q tip in worm oil; then run it through the tail section on the Rip Rap mold on both sides. Works great and a little less messy!

[@WorldsWorstFishing]

That's a good idea!

[@austinlamb8112]

Your plastics turn out nice I would love to get started making these type baits for myself. We always use a tequila sunrise worm fir our ponds.

[@WorldsWorstFishing]

Go for it!

[@Shantel1876]

I just stumbled upon your channel. These things excites me ❤. My mom was a fisherwoman.

[@MarrKing]

What Company should I use for pigments and powders? Or should I do mixture between MF, lure Works, and Dead on?

[@MarrKing]

And Merry Christmas.

[@WorldsWorstFishing]

Yep all 3 are awesome

[@MarrKing]

@@WorldsWorstFishing ok thank you sir have a marry Christmas and I love your videos.

[@bryanmasters5423]

Merry Christmas! Thanks for sharing this video! Love the molds and colors!

[@WorldsWorstFishing]

Thank you! You too!

[@calebcrews5139]

Would you recommend heating on hot plate/griddle for solid colors? Or only laminates?

[@VetsDream]

@WorldsWorstFishing The rip rap in the tub was awesome presentation short notice loved it. Question what jig head is that you are using? Looking for that for same bait and the 3.8 Rap.

[@RevelsGang]

Great work on the pour!

[@toddwieseman2700]

2.8” rip rap - awesome NE smallies will love them

[@WorldsWorstFishing]

Amen

[@chrishebert3240]

Where did you get your injector from and do they have the double injector?

[@roberthoward7360]

Awesome colors chris you are king of king making baits

[@WorldsWorstFishing]

Thanks 👍

[@dawgoscannatina]

Thank You for another great video Chris!

[@WorldsWorstFishing]

My pleasure!

[@haginbird9152]

Great video and colors really like the new molds will have to add to my collection. Have a great night and Merry Christmas and a Happy and prosperous New Year

[@WorldsWorstFishing]

Thanks, you too!

[@hookreelfishing]

Watermelon blue with gold flake 🤔🤔 I'm for sure running that color!! Great video ++

[@WorldsWorstFishing]

Right on

[@sethook-ro4xh]

Merry Christmas! I just found my new favorite worm mold. I have to have it. I love throwing the 6inch worms they are my go to bait all year around just change the speed my pop pop pause.

[@davidcrump2348]

I love that color. It’s a cross between jume bug morning Dawn and or tequila sunrise! Awesome color!

[@WorldsWorstFishing]

It's kinda all 3

[@Bigman2497]

What brand injector do you use, and what size?

[@c3outdoors]

Do the bot worms fish like a zoom trick worm? They look amazing! I've never fished them or the robo worm but caught tons of fish on the trick worm.

[@tjheykoop]

how long do you wait before you pour the next level

[@bayouburner281]

That 2.8 Rip Rap should be great for inshore duty 👍🏻

[@WorldsWorstFishing]

Oh yeah

[@kayakingwithkevin303]

Just got a 3.4 ecto craw mold im looking forward to trying. And i might try some 2 color layer in mojo and action worm. Thanks for the videos.

[@WorldsWorstFishing]

🙌

[@kylelaporte9918]

What are your thoughts on a silicone 3-D printed open pour mold? Do they hold up? Are they worth the money, are they close to a aluminum quality? Could you do a comparison to them?

[@WorldsWorstFishing]

I've used 3d printed molds but they weren't made from silicone..quality is pretty low imo

[@antoniolewis85]

Hows it going just stumbled onto a couple of your videos and i wanted a link where i can buy the baits that u make

[@toddforsythe3109]

Your content is awesome man 🤙🏻🎣

[@michaelbarbieri9871]

Your amazing. Question, how long do you leave them on the hot plate after your done pouring.

[@WorldsWorstFishing]

Just until they cool down

[@DJJMN]

What happens if you were to rotate the c block 180° mid injection?

[@FINNTVBASSFISHING]

Enjoyed the video I may order all these molds been looking for something to replace my kitech

[@WorldsWorstFishing]

🙌

[@BigDaddyDuke101]

Good video I like the new color also the new swim bait 2.8 should do well it would be great if he made a 1.8 for crappie fishing it would open up a hole new line.

[@paddling_fisherman5171]

Really liked that Watermelon Blue BOT

[@WorldsWorstFishing]

Thanks

[@chrisyount5198]

Hand tying some Panfish jigs and watching your video. Love that 2.8 mold. Thanks

[@WorldsWorstFishing]

Right on!

[@adwhite804]

Hooke up...need some of those 2.8 rip raps...my River those would slay bass..

[@eZ_autizm]

Dope stuff! Gonna have to pick some up

[@WorldsWorstFishing]

Definitely

[@stanfamoutdoors]

First worm mold looks a lot like tequila sunrise from Strike king. I love that color for bed fish

[@brandonfennimore9180]

Yessss! Finally 6” bot worm

[@WorldsWorstFishing]

Amen

[@bassin_with_keith]

Awesome looking baits Chris! Those smaller swimbaits would be killer this time of year, and that cinnamon shinner color is perfect for FL!

[@WorldsWorstFishing]

Yessir..you still in Tallahassee these days?

[@bassin_with_keith]

@@WorldsWorstFishing Still in Tallahassee!

[@davidcrump2348]

I think they will be awesome baits!

[@WorldsWorstFishing]

Absolutely

[@basscatlildave]

I definitely like the black better although I never use a black Senko.

[@floridamotoguy8346]

Where can we buy your baits

[@scottlefave6205]

Awesome Job as Always Chris. I use Copper Glitter a lot I love it. Merry Christmas to you and your Family! 🍻🍻

[@WorldsWorstFishing]

Merry Christmas

[@cjfishtales2238]

Loop knot on those little swimbaits are killer

[@lukerobinson4468]

Thanks for the content, I would like your opinion on what the best plastic I can use to make all my baits. Your videos inspired me to begin bait making.

[@WorldsWorstFishing]

I love the Dead On Plastix

[@mikehebert7936]

I can't wait until they make that riprap in a 2". It would soon become my favorite crappie bait.

[@sweetboysoutdoors]

Yes!!! Bigger BOTWorms 🤙

[@WorldsWorstFishing]

The perfect Christmas gift

[@sweetboysoutdoors]

@@WorldsWorstFishing awe thanks buddy and I didn’t even get you something 😜

[@rossstafford4531]

Hi Chris, my name is Ross i’m from Australia I was wondering do you actually sell any of your Bates and if you do I was wondering would you send some over here to Australia I’d be willing to buy some off you the fishing I do is Murray cod, fishing trout fishing and redfin and yellow belly mate. I come across your KZbin channel and I watched quite a few of your videos so now I watch your channel mate good on ya 👍🏻🇦🇺

[@clintfulbright1596]

I would love to see a middle size Rip Rap. They are so good it would sell.

[@djradrs199]

Nice work Mr Sir.

[@fatmaninayak1264]

Would like to see the 2.8 in watermelon with orange flake. Zoom made a fat Albert grub in that but I can't find them anywhere. Think they may of quit making it. They make it with red flake but it doesn't work as well as the orange flake

[@bobbyhempel1513]

That watermelon blue with just a touch of purple Pearl would be gorgeous.

[@WorldsWorstFishing]

Definitely

[@kidholiday1]

Do you recommend the bot bait for someone who doesn't have much experience in hand pours?

[@WorldsWorstFishing]

I'd go with the ribbontails first maybe

[@kidholiday1]

@@WorldsWorstFishing Thanks

[@Northeasttroutadventure]

i would do that color with the blue highlight in trout magnet mold

[@chrishebert3240]

Can the 2.8” rip rap be used for salt water fishing?

[@WorldsWorstFishing]

It's awesome in saltwater

[@chrishebert3240]

@@WorldsWorstFishing I have a problem with my 6” worm mold. I sometimes get these air pockets in the bait and it usually in just 1 out of the 5 that does it. The plastisol is at 350-360 degrees. I have several other molds and they come out fine. Maybe it’s air in injector?

[@johnhenry6436]

Merry Christmas to you and your family as well

[@WorldsWorstFishing]

Merry Christmas

[@j.m.k.3406]

Those cinnamon shad are sweet Mr Jones! Merry Christmas to you ,and your family Be safe during the iguana apocalypse.

[@WorldsWorstFishing]

Haha gonna be cold for FL

[@alwaysbroke1976]

Wonder how these colors would look in a craw using the triple injector?

[@WorldsWorstFishing]

Probably pretty good

[@josephdisselkamp2586]

Fantastic!

[@WorldsWorstFishing]

Many thanks!

[@waynerumfelt9060]

Nose hook that 2.8 on a dropshot and have the net handy!....sweet

[@bobbyhempel1513]

That 2.8 would be good for crappie here in Texas I'd reckon

[@WorldsWorstFishing]

I think so too

[@matthomas6575]

Old mate says about tails if anit chartreuse it anit on use

[@InfiniteBassin]

What temperature are you heating the hot plate to?

[@WorldsWorstFishing]

270 for these worms

[@InfiniteBassin]

@@WorldsWorstFishing awesome thank you

[@clintjenkins13]

@@WorldsWorstFishingI love this mold. My problem is the flake falling. I understand cooler plastic working hot temps but how do you get it cooler without it gumming up?

[@clintjenkins13]

Ahh trade secret lol

[@EbonyKnight1985]

Are your baits for sale?

[@dawnparker2014]

I am new to your channel. How do I purchase your baits?

[@adwhite804]

Can't beat those prices for those molds...no one I've seen comes close

[@WorldsWorstFishing]

Agree

[@Tyler_B.]

Have you heard of burbon stouts? If you like burbon and stouts you need to check them out

[@WorldsWorstFishing]

I'll check them out

[@jamesp2674]

Gotta be careful with that tail mold, might mistake it for the lamenant block! 🤣

[@Bassmaster1256]

Those 6" BOT worm molds look a lot like the 6" BTS roboworm mold.

[@92548dannyt]

looks great to me!!!!!

[@WorldsWorstFishing]

Thanks

[@travislovelace44]

Man that 6" bot mold is alsome may have to get some of those for sure alsome video as always brother merry Christmas to you and your family Triple J Baits

[@WorldsWorstFishing]

Thanks sir

[@mikeockler7121]

dude...cinnamon shiner....mind blown 🤯🤯

[@WorldsWorstFishing]

Thanks man

[@ronmacdougall9612]

Very nice

[@bassman6211]

If junebug and morning dawn got it on. This would be the baby. Very fishy looking color!

[@MetalRunner4]

awesome

[@ftball90]

I’ve been waiting on this video since your FB post!!! My wallet just got considerably lighter.

[@WorldsWorstFishing]

Haha merry Christmas

[@ftball90]

@@WorldsWorstFishing thank you!!! You too!

[@georgekeary1101]

I love krombacher can't find it anywhere

[@WorldsWorstFishing]

We only have a few places with it

[@kickerwormz3262]

Lots of real estate in that cavity. I'm thinking a quad pour.

[@WorldsWorstFishing]

Could absolutely do it

[@kickerwormz3262]

@@WorldsWorstFishing You've been challenged Chris!

[@PythonDad]

I just imagined using that thing with the tails all as one bait lmao.

[@WorldsWorstFishing]

Yeah why not

[@bobbyhempel1513]

Yeah I'd definitely use those junebug bot worms to the detriment of all predatory fish .

[@WorldsWorstFishing]

Hahaha love it

[@tysonmcclellan7108]

You have some rather great content I've learned a lot from your videos. Any idea if AI is planning on a 3in bloodline

[@WorldsWorstFishing]

They are not..not going smaller than 4"

[@tysonmcclellan7108]

@@WorldsWorstFishing darn ok thanks was hoping for a 3in in that style

[@bobbyhempel1513]

As someone who drinks way more coffee than I should, I have never once tasted a beer ( dark or otherwise) that had any coffee flavors.

[@WorldsWorstFishing]

Try a dark German bier

[@bobbyhempel1513]

@@WorldsWorstFishing I have that's all my German father drinks.

[@MrINFAMOUSKING]

Glad I’m not the only one who poops in the shower.

[@johnlantz7278]

The swim bait.oops great but the rod sucks at times

[@Trodontay876]

Awesome pure but that rip rap gold and cinnamon is just down right sexy.

[@WorldsWorstFishing]

Haha I agree

[@onearmedbandit6936]

June bug Dawn

[@FreedomFishing]

Does AI molds sell their molds as free to use? Can you sell the plastics made from their molds?

[@karaengin1982]

👍🏻 👍🏻

[@michaelleady9089]

Hidden middle colors is not a bad thing we’re not even sure what fish see so I would leave it in there don’t cut it out lol

[@WorldsWorstFishing]

Who knows how they see it ha

[@heathschwab]

Wow them look amazing that's a good color to give boys and girls thru my kids fishing group. Well done sir just amazing. And the second one o wow them look awesome also I love how you can do many colors I've been trying to find my last color for my group I try to find colors for buys girls even the gay girls and boys i don't like being fishing with bunch kids and at first was girls were pink I never had a lot cause hard to find at a budget. So for my last year I'm buying on line to get colors for all. I seen 1 worm made 4 colors but it's hard to ask can you make a gay worm. Cause so many against them they won't make for them. But I'm at the end of finding before I leave for the state to state fishing trip. So I do need worms fish well many styles in the gay color not rainbow it's a difent color rainbow I believe. But hope I find some soon I've used all my funds selling stuff to buy baits now. Which when I sell my boat and truck I'll have more funds. But you have a great weekend. God bless

[@mr.shakyhead5878]

You said 8:00.... First?

[@WorldsWorstFishing]

Haha my bad..talked to Josh and we threw it up

[@BigRock13]

I e been trying to order from you left some messages on instagram haven’t heard anything can you or anyone tell me how to order

[@WorldsWorstFishing]

Sometimes they get lost..hit me up

[@BigRock13]

Yes sir I was just watching the rod build The 7” ribbon tail purple pearl white tail the old school worm and same in the stick worm or senko I’ll try you again on instagram thanks for the quick response can’t find them anymore