LAWNMOWER CUTTING DECK RESTORATION

Complete restoration of a lawn mower cutting deck Can I rescue it to a perfect running condition?
Thank you to my Patrons
www.patreon.com/daggerwin

[@CarsRestored]

Me: No way he can restore this Machinery Restorer: Hold my lawnmower

[@warbirdwf]

You do a great job with these mowers my friend! One thing to consider in your restorations is to strip and then re-bright zinc plate the parts that were originally zinc plated. I have a small zinc plating station that I use in my business. Re-bright zinc plating the steel parts in my restorations makes them look brand new. It's also very satisfying to make old bolts look brand new again. Keep up the good work.

[@aserta]

Looking at the rotten out deck makes me realize just how blessed i was in having the facilities to make one out of stainless. I think it's ... oh 14 and change years old now and the paint (i know, blasphemy, paint on stainless) is still in mint condition. That jamble said, great resto, as usual. It's neat to see these units in their prime.

[@berniemac8413]

What’s one of those guys cost and how do I get my hands on one?

[@rpavlik1]

Man, why don't they make more mower parts from stainless? (I know, money, but still)

[@luukcornelissen8397]

@@rpavlik1 well if everything would live endless every company would die i guess it's just marketing to sell more new products if you sell junk.....

[@WendysAnime]

I've wanted to be patron ever since i came to this channel, Now i've a job it's time to get that bank account and donate!

[@sgtJOOSEcapeS]

That's the first 😂 hearing you say those words "having ah bit of ah problem here" means this project is a 🤕headache after headache... 🤦🏾‍♂️Glad to see you upload tho 😎🤣

[@cposwn]

Thanks for posting. I enjoy watching your repairs and restorations. Well done.

[@Styrkur13]

The two type of videos I get the most hyped for, fs22 content and machinery restorer!

[@bigDbigDbigD]

You sir are great. This is my favorite of your projects to date.

[@spiritwolf851]

Looking snazzy A job well done

[@sffitx]

Beautiful restoration, looks brand new!

[@shonepolk9112]

Glad to see you post again!!

[@Herbybandit]

Very nice! Only criticism would be, my old dad was an engineer for the British army and Rolls Royce, he taught me, if your using nut and bolt put the nut on the bottom that way if the nut comes of for whatever reason you only loose the nut and everything stays where its supposed to be within reason, if you do it the other way round you loose the nut and bolt and the whole shebang falls to bits!

[@assessor1276]

I had never watched a slo-movies of paint stripper working before - very interesting!

[@bryce5413]

Interesting project and a great video!

[@unkjason]

That area you always cut grass on. In my mind I think of it as the proving ground.

[@angrybill]

If anyone ever needed a zero turn mower I nominate you as the zero turn mower poster child! Just watching you mill about, backing and filling on that little lawn fatigued me. I used to cut my lawn with a mower like yours. We're talking an acre of grass that took me three hours to cut, what with outbuildings and various trees and other obstacles. Now with a zero turn it takes ma about one hour and I am getting faster at it with practice. (My first summer with a zero turn ) An additional BIG benefit is that the zero turn, with comparison to my old mower, is just about effortless. Try one if you ever get a chance. You'll never go back to the old style.

[@yeagerxp]

Excellent work👍👍👍. Thanks for sharing

[@MRrwmac]

God work. Glad you got the diesel mower running!

[@erikrunas226]

This tractor project turned out great. Can't wait to see what you have in store next.

[@macfeelye536]

You’re the Man!

[@mistral2099]

Thanks! Sensational videos mate. You are simply AWESOME!

[@MachineryRestorer]

wow thank you so much for your generosity and kind words!

[@joshwhyte-cn8zj]

Fantastic video

[@markroth9827]

Thank you for your video.

[@bobjoncas2814]

...lookin' good, nice work, keep safe..

[@NiekBoersma]

I love these videos man. Keep it up please!

[@markharrisllb]

An 18 minute video was uploaded 6 minutes ago, but already 54 of us have liked it and 5 commented. This is one channel where you can have total confidence you’re going to enjoy the video. I love both the narrated and AMSR videos, they both make it a much better day!

[@corbinrussell6368]

Awesome videos! Keep up the good work on both channels!

[@Mraazer69]

Again great stuff!

[@Timico1000]

I just love your videos!

[@matthewhodd7052]

Love your Farming sim videos and these restoration videos are some of the best quality I've seen, Daggerwin ftw

[@richardwalker1168]

Daggwin your the main reason I got into farm simulator and restoring tools and other things. Lol

[@eddiepatterson5025]

Nice job 👍.

[@FuccoTheClown]

good job!

[@ethanatkinson2345]

Great video

[@tyman1014]

I actually rebuilt/restored the mower deck on my Kubota tractor just over a month ago.

[@robertmailhos8159]

Looks like the mower deck is a rear discharge style great to see you got her back in running condition

[@matthewbrittain2919]

Westwood's have a rear hopper and rotary sweeper. Awesome machines for thick wet grass, they will cut and collect anything, with nothing to block up.

[@robertmailhos8159]

@@matthewbrittain2919 thanks for the info on this mower young man

[@zzzires5045]

loving the work but a few suggestions to make your life easier. cover the paint stripper with a plastic sheet (or wrap the part loosly in plastic sheet) to slow its drying and letting it work longer. fill bolt holes with tape before painting so you wont foul the threads maybe look into some electrolysis for things like the new old stock bearing housings so you can repair the zinc plating otherwise exactly what we have come to expect from you, a good resto

[@m60mgman]

Paint stripping part: very satisfying…

[@Familyfleet]

Glad to see another post, was starting to worry

[@ohiofarmer1]

This probably isn't relevant to this video, I can't remember because I have been binge watching all of these videos of yours 😂, but anyway, I notice that you seem to put your decals on dry, and as someone that has put on hundreds of decals, if you spray some windex or the equivalent of that on your surface first, you can apply your decal and use a squeegee to work out any air bubbles and the window cleaner evaporates after a couple of hours. I learned this method from people who apply decals and placards fir a living. Hope this is helpful. By the way, I have been watching your FS videos for years, I'm a big fan! Keep up the good work!

[@Unionjoint]

Hi, I love your videos, as I am learning about small engine repair as a hobby. I was wondering if you ever considered making a series of videos about the components/mechanics and function of a small engine, its parts (ie on a riding mower, deck, belts, etc), and how you diagnose problems. I can't find anyone on KZbin that explains things as well as you do. That was not meant to butter you up! However, it's true. You present your material in a logical and clear way.

[@danielprivate7442]

The second patch of grass, the thick stuff, looks like it could have been cut a little cleaner with some higher RPMs. But I don't know what that engine can do. Considering the low RPM/high torque nature of diesel engines and the small size of the deck and blades, they probably should have made this deck with smaller spindle pullies.

[@philipscott1128]

I wish I had this video in April when I recommissioned a Westwood 1012H. I overhauled the deck, no where near as nicely as your's though. Stripped it right back, regrettably didn't take photos of how it went together. Hammering the spindles out was a nightmare & I ended up damaging the threads. But got them tapped & they're fine now. Wire brushed rust & loose paint off the deck & welded on 2 patches & a large portion of skirt. Painted the deck with black hammerite. Put it back together with new bolts, bearings & sharpened the blades. I used old lino for the flap at the rear. Gave the mower a full service, new pulley bearings, a few new belts & a really good clean. Replaced the rakes in the PGC & was amazed at the difference! All I need now would be deck brake pads & a decent seat Know where I could get any?

[@MachineryRestorer]

I have seen a few good seats on Ebay, you can also buy universal seats new. You can get the brake pads from here: www.westwoodtractorspares.co.uk/cutting-decks/brake-blocks

[@CraydenGamingOfficial]

@@MachineryRestorer nice job daggerwin or dagwin

[@someperson7]

All those missed strips of grass🙀 Y'all need to overlap your rows👍🏻

[@batman1989keaton]

Thanks for another video, just wondering what you do with all these restored mowers? Keep or flip after finished?

[@ArmpitStudios]

So weird to hear a Diesel engine in a lawn tractor. Good looking machine. It’s a swather!

[@rpavlik1]

Great work! Interesting that such a brute of a tractor has only two spindles. Mine is definitely not diesel but has 50" deck with 3 spindles. I guess maybe cheaper with fewer spinning parts, bearings, etc? ( I figured riding mowers had smaller blades so more of the blades could be at the maximum allowed tip speed, no idea if that's true)

[@arrowboss6114]

Ru the same guy from daggerwin

[@ZippeNftw]

Nice! What do you do with all your restored mowers?

[@ThatYZguy]

Are you gonna do a face reveal at 500k or 1 mil subs?

[@charlienorton2337]

Why would he need to do a face reveal? This channel is about restoring mowers

[@barneykennett9282]

Fantastico...👍.

[@samhudsonjr6604]

Nylon insert nuts the way to go .

[@Roboticus_Prime_RC]

Hey Daggerwin, where do you get your new-old stock Briggs and Stratton parts? I've got an old 10.5 HP motor out of a John Deere 111 that needs rebuilt, and I'm having a hard time finding parts.

[@danwaters115]

What paint stripper do you use?

[@johnpozerski7949]

What did you paint on to get the paint to come off

[@pussycat1971]

Think you need to bail and wrap for silage naxt 😀

[@Thibault_95]

What paint stripper are you using ?

[@abesmith8642]

Can you do a westwood restoration

[@dutchfarmersnl3650]

Do you know what that paint remover is on 2:56 and does it work also for restoring vintage tractors?

[@cosworth444]

What is this black thick paint ? Enamel paint ?

[@WhataTry]

For a lawnmower restorer your grass is in need of some TLC too ?? 😂

[@MachineryRestorer]

Lol no that's just a rough area I test mowers on

[@JohannesRanda]

are you the same guy who has the daggerwin channel ??

[@MachineryRestorer]

Yes

[@JohannesRanda]

@@MachineryRestorer I new it :D that voice was recognizable :D :D

[@johncasalinuovo3352]

Where’s you get all those tools from?

[@thomasjordan2275]

What chemical do you use on the powder coat to remove it ???

[@MachineryRestorer]

Paint stripper called Power Strip

[@oldguy8177able]

do you do welding

[@alessandropezzella855]

Wow

[@dutchfarmersnl8691]

Daggerwin what is the name of the liquid you apply on to the parts at 2:54

[@antodenn381]

How do you install the break cable on the cutting deck I can’t see where it connects

[@MachineryRestorer]

It hooks around a rod underneath the tractor mower.

[@antodenn381]

@@MachineryRestorer i can’t see it

[@dafyddmorris4954]

Wouldn't that d1200 have a 42 inch deck rather than a 36? Got 3 Lombardini diesel d1200 there 1986/86/87 all with 42 inch contra deck never seen a d1200 ruggerini in person but I'm sure there 12.5hp Vs the 8/9hp from Lombardini would of thought they be bigger deck than 36?

[@evan_kumar]

5:12

[@288graf]

😎😎😎👍👍👍👍👍👍👍

[@horacerumpole6912]

Loctite 609 bearing adhesive Ospho is superior to evaporust-

[@anthonygostling]

Anyone who knows FS will know your voice, but we don't know or see your face...!

[@forthwithtx5852]

Seemed a bit of a shame that the spindle housings went back on with an oxidized finish, when everything else was renewed. Maybe it’s time to develop an organic nickel plating capability...

[@michaelskinner896]

I thought the same thing.

[@Fred_8360]

Get a 135 massey

[@johncasalinuovo3352]

He sounds a little like Daggerwin

[@rpavlik1]

Cause he is

[@bradschuh4618]

Check ebay for the injector kit

[@johncasalinuovo3352]

I think he is Chainsaw 100

[@virusuploadin]

1/4 face reveal!!!

[@oigleoystereater2003]

A pity you didn't etch prime and paint the bearing carriers, especially given their rarity. A little below your usual high standards?

[@MachineryRestorer]

They are already zinc coated

[@oigleoystereater2003]

@@MachineryRestorer well nearly all coated - they're pretty crusty with a lot of visible rust. Anyway it's your call. Good resto otherwise, a great looking machine.

[@gr1mrea9er82]

Some of the parts he didn't really restore. The discs that held the pulleys should have been treated with rust converter, and painted black. The various pushrods, screws and springs should be plated in chrome and zink.

[@brianrutherford3681]

You never torqued the hold down bolt.all injector hold down bolts have a torque.it is do to the high pressure they operate under.if not done properly the injector can possibly blow out if the hold down but is not torqued properly.please go back and torque it.

[@MachineryRestorer]

I have no spec chart for this engine. It's very tight.

[@brianrutherford3681]

Try looking online or ask Western Truck and Tractor Repair.he is a mechanic on KZbin.he might be able to help with the spec.

[@steveg8337]

What's the story with you restorers and mechanics using those gloves, are you afraid of getting your hands dirty...

[@hesjevoll]

First