Lay-Z-Spa Paris unboxing, setup and review

This video is about unboxing, setting up and review of the Lay-Z-Spa Paris
By using our Amazon Affiliate links you are helping this channel at no extra expense to you:)
Please also consider supporting us by becoming a Patreon / brenteck
or a one-off donation www.paypal.com/donate/?hosted...
You can get your Lay-Z-Spa Paris Hot Tub with RGB LED Lights for 4-6 People New version 2022 amzn.to/39xb9Ge Old 2019 versionamzn.to/2Y5AgEi
Bestway Lay-Z-Spa Floor Protector amzn.to/2O4wjQH
Clearwater CH0018 Lay-Z-Spa Chemical Starter Kit for Hot Tub and Spa Treatment amzn.to/2Lwu3ja
Lay-Z-Spa Canopy Hot Tub, Beige, 12 x 61 x 8 cm amzn.to/2LwzlLt
Lay-Z-Spa 58317-17 Pillow Set, Hot Tub Head Rest, White, Set of 2 amzn.to/2XYXdhC
Coleman Gazebo Event Shelter XL 4.5 x 4.5 m for Festivals, Garden and Camping, Sturdy Steel Poles Construction, Large Event Tent with Sun Protection SPF 50+ amzn.to/2LyQswe
Lay-Z-Spa Hot Tub Drinks and Food Holder, Inflatable Spa Accessory amzn.to/2GntROO
Intex"PureSpa" Maintenance Kit amzn.to/2JWRApZ
AquaSparkle Hot Tub Bromine Tablets amzn.to/2XS4Whb
Avenli Spa thermal blanket - solar cover for SPA, Whirlpool, Jacuzzi Ø 160cm amzn.to/2O4AEDt
Pure Spa Reusable Washable Foam Hot Tub Filter amzn.to/2V4itiH
Mipow solar playbulb Einzeln amzn.to/2Y2h13o
BTL-400-BK Playbulb garden - RGB colour LED light, Solar by Mipow amzn.to/2Y2id6S
4 Pack Solar Torch LED Flickering Dancing Flames Lights amzn.to/2YajfxV
Solar Belt Light Parasol 2.7m (closest I can find) amzn.to/2Yj5Hvf
There is an update about recommendations for this video best to get the Lay-z-spa cover bit.ly/hottutbthermalcovers
check this out • Lay-Z-Spa vs CleverSpa... as to why.
CleverSpa Medium Round Universal Thermal Hot Tub Cover amzn.to/3jYFxeu
As we are doing a summer special Smart Garden Series.
In our next video, we will be looking at the DARDARUGA Solar Powered Garden Shower 35 Litres amzn.to/32J4eSr
Please leave any comments below and give us a thumbs up and click subscribe if you liked our video and click the bell notification icon to be the first to know when we upload our next video.
Thanks for watching.
Recorded using;
Govee Lyra Smart LED Floor Lamp amzn.to/3LtVR3V
RØDE Wireless Go II Mic amzn.to/3H4yCu4
RØDE SmartLavPlus Mic with (SC3) TRS adaptor amzn.to/3nX7rKa
Neewer F100 7inch Camera Field Monitor amzn.to/3QI7N3V
Neewer 74" Pro Video Tripod with Fluid Head amzn.to/3kUAK1I
Neewer Aluminum Alloy Quick Shoe Plate Adapter with 2-Piece Quick Shoe Plates amzn.to/3ZtD4M5
Neewer Direct with 15% Discout code BrenTeck
neewer.com/products/video-cam...
neewer.com/products/neewer-tp...
uk.neewer.com/collections/pho...
neewer.com/products/neewer-pr...
neewer.com/products/video-cam...
Insta 360 one R: amzn.to/38pjBTC​
USB SUDOTACK Professional Studio Cardioid Condenser Mic Kit (ST810) amzn.to/3zCAJRG
Pixel K80 RGB lights: amzn.to/34xlFaQ​
OnePlus 6 128GB amzn.to/2l6s9Xh​
Canon Legria HF G25 Wide Angle High Definition 3.5 inch Touchscreen LCD Camcorder (10 x Optical Zoom, Image Stabilisation, 32 GB Internal Memory) amzn.to/2CWGWgA​
Camera Tripod, K&F Overhead with Horizontal Arm TM2534T amzn.to/3fSHuqI
Andoer 10.5W LED Video Light Lamp Dimmable,1280LM 160PCS LEDs: Search link for similar items amzn.to/3YqA9T8 I have but out of stock amzn.to/2Ka9bOO​
RØDE Camera and Audio VideoMic with Rycote Lyre Mount amzn.to/2OTUqOH​
Photography L Bracket and Mount Heavy Duty L Mic Stand with 2 Standard Flash Hot Shoe Mounts for Video Light Handheld Grip Handle with 1/4’’ Screw: Search link for similar items amzn.to/3ZL7Hwl I have but out of stock amzn.to/2SHD21q
Edited using;
Corel VideoStudio Ultimate 2020: amzn.to/3ckflbC
Corsair CMK32GX4M2B3000C15 Vengeance LPX 32 GB (2 x 16 GB): amzn.to/3t7GKDm
Corsair CMK16GX4M2B3000C15 Vengeance LPX 16 GB (2 x 8 GB): amzn.to/2Ynb4Mi
Seagate BarraCuda 120 SSD 1 TB: amzn.to/3iX92fu
Intel Core i7-10700K 3.80GHz LGA1200: amzn.to/3adBO7y
MSI B460M MORTAR WIFI Motherboard:amzn.to/3psTmD4
Gigabyte GeForce RTX 3070 VISION OC 8GB Graphics Card: amzn.to/3j24nsv
Cooler Master MasterLiquid Lite 240 CPU Liquid Cooler: amzn.to/2MywG5O
Corsair iCUE 4000X RGB Tempered Glass: amzn.to/39t7Ddr
ARCTIC Case Fan Hub: amzn.to/3pvR0TR

[@TonyWatterson-yz9tz]

A few years ago I was lining up to go on a ride at Universal, Florida and a group of American students asked me who we Brits considered to be British hero's. I struggled for an answer but if I'd known you then I'd have said " Dave from BrenTeck IT Support." I bought my Paris tub 2 years ago and found you when I was struggling to understand the enclosed instructions. I saved you in my favourites to remind me how to take down and set up the tub since then. Once again you have come to my rescue today, helping me to put the canopy together and now I can relax in the 40 degree tub no matter the weather.......Thank you Hero Dave 🙂

[@davidlowton9359]

Mate, thank you for saving my sanity with this in-depth video tutorial. Basically the instructions that come with this Spa are next to useless. Your guide has made my children very happy. Many thanks

[@BrenTeckITSupport]

Hi David, I am glad I was able to save your sanity and make your children happy. I know how how bad some instructions can be. Hope you all enjoy your Lay-Z-Sap in this lovely sunny weather we are having. Kind Regards and keep well David

[@stephenhickey1709]

Hello Dave just purchased a Lay z Paris spa here in France and found your video great.. No need to read instructions just followed your video.. Thanks for posting...

[@BrenTeckITSupport]

Hi Stephen, thanks for your comment. Glad you found my video helpful, enjoy your Spa. Kind regards David

[@The5thDimension]

Great work Bren please keep going you are great at explaining things. This was a huge help

[@BrenTeckITSupport]

Hi, 5th Dimension, Thank you for your comment it's much appreciated and I have glad you found this video to be a huge help! :):) Kind regards and keep well David

[@jaysionparrkesh2788]

Probably the best explanation video I've seen on KZbin very well done ty.

[@BrenTeckITSupport]

Hi Albert, Thank you for your praise I really do appreciate it. I hope you enjoy your spa this summer, kind regards and keep well David

[@gabrielt5001]

I love your garden! 😀

[@BrenTeckITSupport]

Hi Nerf Boy, Thank you, it's one of the reasons we moved to Kent and out of London was to have a garden. I think it's important to have some out side space to ones self. Kind regards and keep well, David

[@vykkysearle-prestidge9779]

Hi Dave, I have recently purchased a Lay z spa Paris and am waiting for it to arrive . I have watched your set up video a couple of times to prepare and have found it really useful. Thank-you You have a lovely garden.

[@BrenTeckITSupport]

Hi Vykky I hope you enjoy your lay-z-spa and glad I could help. Kind regards and keep well David

[@cinemainsymphony737]

David - you utter legend! Thank you so, so much for taking the time to make this brilliant and honest - and informative video. People like you make the world go around! We guessed your name was David - and we were right! Good Friday 2021 here and we’re about to start this mammoth task of setting this Paris spa up! We do have an outside hot tap but filling mostly with cold because we’re sure our tap is hotter than 40C and don’t want to damage the lining, heater/any of the parts etc. Wish us luck and thank you again so much!! Legend! WE LOVE DAVID!,

[@BrenTeckITSupport]

Hi Cinema Wow, thank you so much for your lovely comments it makes it so rewarding to hear how you felt :) thank you, you really put a smile on my face reading this today! If you do want to use your hot tap part fill with cold first and then mix keeping an eye on the temperature as you are right it could be too hot and damage the tub. Let us know how you get on with your spa. Sorry for the delay in replying but helping my parents move in into their new house which needs some work to get it going but will be worth it in the end. Kind regards and keep well David

[@cinemainsymphony737]

@@BrenTeckITSupport Dave, yes, we 1/3 filled with cold then added the hot tap hose and like that, just kept an eye on the temp gauge. It got to about 28C or so pretty quickly and then started the steadily rise. It took just 2.5hrs to fill it using this method. We’ve used it several times since setting it up. It’s great. I’ll bet you were a godsend to your parents helping them move house! Everyone needs a helpful, friendly Dave like you in their lives. Keep making the videos! I’ll have to watch your ‘deflating/packing up’ the hot tub video as well.

[@BrenTeckITSupport]

@@cinemainsymphony737 Hi Cinema :) Great glad you are enjoying your spa the deflating/packing up video can be found here kzbin.info/www/bejne/mHyXnqyMmNpmjas. We have so much to do at their in their new house and it all needs to be done before we can start Dads model train business back up as all the stock and equipment is all packed and over the place. I may be doing some videos about it for other smart home tech and possible do a video for his business 3SMR once it's all done. Kind regards and great chatting with you, Keep well David

[@trebor1855]

Thank you for your video, it is really informative and helpful, ps your garden is lovely.

[@BrenTeckITSupport]

Hi Trebor, Thank you for your lovely comment I really do appreciate it. Glad you found my video informative, helpful and love our garden we do our best at keeping it neat and tidy. Kind regards and keep well David

[@candiecekayamua497]

Thanks for this made setting up so much easier

[@BrenTeckITSupport]

Hi Candiece, Glad I could help, hope you enjoy your spa Kind regards and keep well David

[@becceflint8793]

Lovely, thanks! Great garden too

[@BrenTeckITSupport]

Hi Beccefint, Thank you so much for your lovely comments it really means so much to us and helps motivate us to make more videos. All the best Dave

[@stevedunsire7208]

brilliant thank you very helpful Steve

[@BrenTeckITSupport]

Hi Steve, Glad you liked it, thanks very much. Kind regards and keep well David

[@kear3922]

Good vid, thanks and well done, I have the Miami all sorted with in the day, due to size it heats up 2c an hour

[@BrenTeckITSupport]

Hi Kevin, Glad you liked our video about the Lay-Z-Spa. You might want to get the Avenli Spa thermal blanket - solar cover for SPA, Whirlpool, Jacuzzi Ø 160cm amzn.to/2O4AEDt you may be able to get away with a smaller one for the Miami but I can see no reason that a larger one folded over would not work, infect more insulation the better I would have thought. Enjoy you spa and keep well. David

[@trevortear1902]

Cheers for the video David. Was a great help :-)

[@BrenTeckITSupport]

Hi Trevor, Thanks for the comment it's much appreciated and glad you like our video. All the best and keep well David

[@jjjames1982]

Really good vid. And great tip about the water filling just to minimum line. 👍

[@BrenTeckITSupport]

Hi James, Glad you found this tip helpful, I hope you enjoy yours over the summer. All the best and keep well David

[@kev008ify]

Very helpful i filled it up to the maximum 😆👍

[@BrenTeckITSupport]

Hi Anthony I have a feeling most of us will. Lol never mind I did the same and will probably do it again in the future. Thanks for the comment all the best and keep well. David

[@hayleynelson7261]

Amazing job. Thankyou so much

[@BrenTeckITSupport]

Hi Haley, You are very welcome, I hope you are enjoying your spa whiles we have this lovely Sun. Kind regards and keep well David

[@MartynStandage]

Super video, a good refresher as the last time set mine up was 2 years ago

[@BrenTeckITSupport]

Hi Martyn Glad you liked it, hoping to enjoy our one soon as almost finished building our new smart kitchen. All the best and keep well David

[@MartynStandage]

@@BrenTeckITSupport Hi David, I'm sure you will, just having a few E02 E08 problems with mine, think its stripdown time on the pump, wish me luck ! Regards and stay safe Martyn

[@BrenTeckITSupport]

@@MartynStandage Hi Martyn, Check out Hot Tub Descaler - E02 Error - Compatible with Lay Z Spa AirJet ebay.us/Tj9qW6 this might help and amzn.to/2AN6qyU If you just want to add it to the Spa Wish you luck and keep well David

[@markallan9378]

Great video thanks

[@BrenTeckITSupport]

Hi Mark Glad you enjoyed my video about the Lay-Z-Spa Paris and I appreciate your comments. All the Best and keep well David

[@martaeliseo7874]

Gracias😍👍,lovley garden & lovley fountain!!

[@BrenTeckITSupport]

Hi Marta, Thank you for your lovely comments, I have tried to find a link for our fountain and the closest I can find is this H147cm 8-Tier Rock Self Contained Cascade Water Feature Fountain with Lights amzn.to/3znkPfF its the bigger version of our one. I hope you have subscribed as we have more Lay-Z-Spa videos in the making. All the best Dave

[@Turbo-yt9ve]

Thank you so much for making this video. It helped so much when setting up my paris lazy spa. The manufacturer instructions and videos were rubbish.

[@BrenTeckITSupport]

Hi Tracy, I am glad it helped, thank you for your comments and enjoy your new Spa. Kind regards and keep well David

[@kev008ify]

Hi 👋, mine only took about 24 hours to get up to temperature. My son loves it.

[@BrenTeckITSupport]

Hi Ecogreen Glad your son loves your Lay-z-Spa. 24 hours sounds about right for heating it up. I defiantly recommend the Avenli Spa thermal blanket - solar cover for SPA, Whirlpool, Jacuzzi Ø 160cm amzn.to/2O4AEDt it really helps keep the heat in and reduces the time it takes to heat up the spa. All the best and keep well David

[@milothechihuahuabrunetandmommy]

Great video thank you for sharing I just got my intex hot tub but I have to wait until spring to use it cant wait have a beautiful day God bless you always

[@BrenTeckITSupport]

Hi Milo, If you have the new one that has the frost protection system you can run it all year long and a hot tub in winter is meant to be even nicer than in summer. If you are running it all year I would also advise having a hut around it with extra insulation to keep running costs down and extend its life. As I have the older one we have to weigh till next year as well :( Enjoy and relax in the hot tub when you can. David

[@milothechihuahuabrunetandmommy]

@@BrenTeckITSupportthank you so much have a beautiful day God bless you always

[@neilb4328]

I fully insolated my tub boxed it in and sat it on 60mm insolation and mats.also wrapped the sides and bk in foil insolation. And before I pumped the lid up I used double sided tape an stuck more foil insolation on top of the inflatable bed.took 12 hrs to get from 4degrees to 40. And takes less than an HR to get from 34 to 40 .I also boxed in and insolated the control/ pump really helps with the noise and keep it warm.had it for a few weeks now love it . Hawaii air jet £490 B+q

[@BrenTeckITSupport]

Hi Neil, Wow, what a lot of work, but sounds like it paid off. I love the idea of boxing in the pump as it can be noisy but so are the bubbles. If we had the extra space to box it all in I think I would but it only just fits in as it is. Kind regards and keep well for 2021 David

[@neilb4328]

Cheers Dave .And thanks for the video.im a carpenter so was easy for me to do this.if I could upload pics to this to show ppl I would .but we'll worth it even insolating the lid and side will help.ive gone ott as it's winter but lovely to sit out in the tub when it's cold and a clear night sky. .All the best pal👍

[@BrenTeckITSupport]

@Neil b Hi Neil, I would love to have seen what you did as well. Carpenter a very handy craft to have :) so much you can custom do your self. 👍 Yes, you are very right sitting in a warm tub on a cold night is great especially if you can see the stars. All the best David

[@Wolfie565]

Nice one 👍

[@BrenTeckITSupport]

Hi Wolfire, Glad you liked our lay-z-spa video. Kind regards and keep well David

[@MsEllaSegoviaChannel]

We have the underlaying indeed.

[@BrenTeckITSupport]

Hi Ella, Glad to hear it, I think is so worthwhile getting the extra protection and insulation. Kind regards, keep well and enjoy your spa. :) David

[@johnparrette8069]

Very interesting with no frills. Just the facts with an Aussie accent. Nice fellow. Would be interested in seeing a video of cleaning and draining the spa. Thanks so much. I have the Coleman “Tahiti”.

[@BrenTeckITSupport]

Hi John, You can see the pack up video here kzbin.info/www/bejne/mHyXnqyMmNpmjas which I think you have already found lol. I love how youtube let me know the order of comments, so now I know what you were apologising for, still all good. My accent is from England born and raised although I do pick up a bit of a NY accent when I go and see my Uncle in the concrete jungle. All the best and keep well David

[@susanhewerdine1994]

I couldn't figure out what the extra bits were for either - I've got the Helsinki ... might be just if you want to do it from a different angle? Thanks for the videos - great help

[@BrenTeckITSupport]

Hi Susan, Thanks for your comment and hope you are enjoying your lay-z-spa. When you say "might be just if you want to do it form a different angle" what do you mean? are you talking about the extra bits? If so they are for deflating the spa so have a look at kzbin.info/www/bejne/mHyXnqyMmNpmjas at time stamp 24:07 Hope this helps, keep well David

[@clivemcloughlin4977]

Top tip!!! If you have instant hot water boiler...turn your boiler temperature down to 40° and fill from tap saves around £7 on electricity

[@BrenTeckITSupport]

Hi Clive, Yes that is a good idea, infarct I was thinking of doing that this summer as I have got a hot water tap in the garage now as I have been using it as a temporary kitchen whilst we were working on the new kitchen install. Did not think it would also save money :) but happy to save money were we can. I was just thinking it would be a quicker way of getting the spa to temperature. Thanks for your comment and keep well. David

[@ritchierich9407]

this is what i do. great idea

[@fussydave]

Great review! I think the minimum maximum 4-6 people section should be a mini series :)

[@BrenTeckITSupport]

Hi Dave, LOL that could be fun. Start off with filling up to the max line with one small child and work your way up to six large adults. Kind regards and keep well. David

[@juliegoodall3860]

Good video

[@BrenTeckITSupport]

Hi Julie Thanks for your comment, I am glad you liked our video. I can't wait till next summer to get it back out again, its like going away for a mini brake it's so relaxing. Kind regards and keep well David

[@MrMtrent5]

Work good

[@BrenTeckITSupport]

Hi Matt, thanks for your comments it really does mean a lot to us and inspires us to keep going. Please remember to like, share and subscribe. All the best Dave

[@barrytaylor3530]

Good video. Just bought one so I’ve a good idea how to set it up which is lucky as the instructions were rubbish.

[@CountDaveVV]

Hi Barry, glad you enjoyed my video. I know you will enjoy the Lay-Z-Spa especially at this time in quarantine keeping the world safe by staying at home in your own spa. 👍

[@barrytaylor3530]

David Brenchley hey David, do you keep the filtration system on or is that when you are heating it

[@BrenTeckITSupport]

Hi Barry, I keep the filter attached all the time and clean it out after every use. Hence I went for the two sponges as I can swap them around. Water only is pass through the filter when the circulate mode is on. It's the button immediately under the temperature controls. You can only heat the water when circulating the water. So, you can circulate / filter the water or heat and circulate . No heat only. I hope this answers your question. All the best and keep well. David

[@jameshale1017]

You are a saviour! I consider myself smart (ish) and have no trouble with flatpack furniture. However the information that comes with this spa is rubbish and a disgrace. Not clear on how to assemble and nothing on operation! The official videos miss out steps and ignore essential actions. You covered it all. I too had a bag of left over parts and couldn't work out where they went. I did wonder about generic packs. Thank you so much for taking the time to do this video.

[@BrenTeckITSupport]

Hi James Thank you for your comments it meas a lot to me. Yes Lay-z-spa video did miss out a lot. The bag left over is for deflating the sap see my video on hoe to pack away the lay-z-sap kzbin.info/www/bejne/mHyXnqyMmNpmjas so unclear in the instructions so don't feel bad. Thanks for watching and keep well David

[@antoniomunoz7810]

Best video I have seen for instructions on installing this hot tub. The manufactures instructions are the worst ever.

[@BrenTeckITSupport]

Hi Antonio Thanks for your comment I really do appreciate it. Lots of people are saying the same thing. It's quite common now for companies to do poor instructions. In the past, everything came with a user manual telling you how to use, maintain and repair the item. Nowadays you buy it and though it away so why bother with instructions let alone a user manual. Kind regards and keep well for 2021 David

[@chrisevansgardenservicesjo8093]

I just had the delivery of my lay z spa Bali this morning so it’s not up and running yet it also got led lights in it

[@BrenTeckITSupport]

Hi Chris, Have fun setting it up today and enjoy it tomorrow. You will love the LED lights. Take care and keep well David

[@shazbarton4340]

Hint fill with hot water half way and then cold and hot halfway though cost affective and u can enjoy as soon as it full

[@BrenTeckITSupport]

Hi Shazbarton, Yes you can fill it with hot water at the same time if you want. I would not start with hot water as you hot water may easily be much hotter than what the Lay-Z-Spa is designed for and may cause damage to the Spa or be two hot for the user causing burns. Some hot water systems will go up to 70-80-90 degrees cellulitis to kill bacteria in the system so be careful if you do this. So starting with the garden hose will help as you will then be heating cold water not cooling hot. Also as soon as the inlet is fully submerged I guess you could put on the pump and heater as well making sure the water level does not drop making it run dry! Hope you subscribed as I will be doing more Lay-Z-Spa videos. Kind regards Dave

[@kdavies521]

Hello. Do you happen to know why the lights are only on a short lead when the instructions say the tub needs to be at least 4m from the socket for safety?

[@BrenTeckITSupport]

Hi K, LoL, I was just joking about this with my Dad after setting it back up. Yes, I do know why it's simple £££££. As long as the transformer is not going to get wet (the big box) it's only 12V after the transformer, not 240v so will not kill you. So you are meant to mount the transformer on the wall so it will not flood. The rest does not really matter. But a longer cable on both ends would have been nice. Kind regards and keep well David

[@dawndickinson9964]

hi good video just a quick question is the base meant to inflate fully as mine base hasn't also we didn't here a beep to tell us the inflation had finished filling up.Do you think i need to put more air in it. I have not put any water in yet as i was unsure about the base.

[@BrenTeckITSupport]

Hi Dawn, Thanks for the comment and glad you liked my video. The base is not meant to inflate. I can't remember if it beeped to say it had finished inflating or not, I don't think it did. The walls should be firm and rigid with only a small bit of give in them if you push down on the top of the sidewall. It can take the weight of my wife sitting on top of the sidewall to help here in and out. I am not recommending that someone sits on the sidewall but this shod give you an idea of how much air to put in. Don't worry too much about it, as if after you fill it you can remove the pump and add more air later. To remover the pump to reinflate without emptying the spa see kzbin.info/www/bejne/mHyXnqyMmNpmjas time stamp 3:08 Hope this helps. Kind regards and keep well David

[@janicehoneymorgan6377]

Thank you so much - a question?? Does the pump annoy the neighbours?? 😱😱

[@BrenTeckITSupport]

Hi Janice, A good question. Our neighbors conservatory is just the other side of the fence they've never mentioned it being too loud to us. But we have great neighbors, and the whole area is respectful, polite and keeping general noise down to reasonable level so any unwanted annoying loud noise would be a distraction and obvious. So you shouldn't get any complaints unless you have an obnoxious neighbour. Thanks for watching and your comments, all the best and keep well. David

[@vlogcentral9303]

FYI I'm sure you've realised now one year on but the chem connect locks onto the hot water inlet that you removed the second black stopper from. It's not a chemical floater it will sink if you try and float it. Watching your video how come you didn't shock the water and carry out chemical checks before using ? Mine took roughly 48 hours to cycle after the shock dose of chlorine before I could use it

[@BrenTeckITSupport]

Hi Vlog, Yes, you are very right that it is not a floating dispenser it goes on the top screw for dosing the water after it comes out of the pump. I filled the tub with fresh tap water so I could just go straight in like a bath and I then just dosed it after and tested it the next day. Taking a shower before and after will help keep the tub and you cleen. Well spotted and thanks for pointing out where it goes. I did put it in the right place in the end but that obviously got omitted from the video. Thanks again and keep well David

[@stuartm3591]

Hi, thanks for your helpful video! Did your box come with a rubber washer seal? Once we'd filled ours we noticed it had a small leak between the hot tub and where you initially put the inflater tube, and nowhere did I see on any tutorial video's that this was needed! Thanks

[@BrenTeckITSupport]

Hi Stuart, If it did they were already fitted to the hose or socket which is why I did not show them. This year I did have a black sill fall out and I had to hut for it, as it leaked without it. It was a special shape to fit around the plastics so a standard washer did not work. I think this is the part you are talking about. www.lay-z-spa.co.uk/lay-z-spa-screw-valve-pack.html All sills should have come with it so if you are missing one take a photo of where the leak is and contact lay-z-spa customer support support.lay-z-spa.co.uk. I am sure they can send a spare one out if it's in warranty. Kind regards, thanks for watching and keep well. David

[@stuartm3591]

Hi David, Thanks for your quick reply and detailed response! It’s actually next to where that valve you’ve posted is. It’s where you initially put the black inflater tube on on the pump, but once the pump lines up with the hot tub it’s actually the connection next to it. (The singular one, not the 2 on top of each other) It may just be that this rubber seal had fallen out which is why you did not notice it and therefore didn’t have to do anything upon set up

[@BrenTeckITSupport]

@@stuartm3591 Hi Stuart, Then it's the one in the cap www.lay-z-spa.co.uk/lay-z-spa-spa-control-air-lid-adaptor-a.html Kind regard David

[@martinkennelly5276]

Hi Thanks for this . When it comes to putting Chlorine tablets in how long should i run the pump for and is this the correct procedure ?

[@BrenTeckITSupport]

Hi Martin I use bromine tablets amzn.to/39mL5JA as they are meant to last longer in the hotter water and can be less irritating. I have 2 to 4 Tablets broken up into smaller pieces and keep them in all the time in the water out cradle.(the upper on the two plastic screw on things on the side) If you want to use a floater as well you can if you need extra treatment. I run the pump all day if I am going to use the spa to get it up to temperature. I turn it off if I am not going to use it for a coupe of days. It all depends on how you want to use it. Just remember the more you use it the more chemicals you will need. Just keep an eye on the water condition using the test strips and adjust chemicals as needed. Clearwater CH0018 Lay-Z-Spa Chemical Starter Kit for Hot Tub and Spa Treatment amzn.to/2Lwu3ja I hope this helps Kind regards and keep well David

[@TheArual1]

My daughter has just bought this for us. Came across this and thank you for sharing we are more confident now to setting it up. Don’t know if we missed it but you didn’t mention anything about checking the water and putting in chemicals before you get in, so does this mean you can get in it for the first time without chemicals? Looking forwards to using it.

[@BrenTeckITSupport]

Hi Laura, Thanks for your comments great to hear from you. I did not mention really talk bout how to chemically treat the water as it will very on so many things but if you use it a day or two after it was filled then it should be clean tapwater so yes it will be fine but only for a day or two then the water will start to stagnate as in the UK tap water already has chlorine in it. We did a new video about the Milan kzbin.info/www/bejne/nKDaY36Xn5h5iMk where we showed the new Thermal Hot Tub Cover amzn.to/3jYFxeu as for cleaning and treating the water I use KAHEIGN Hot Tub Cleaning Kit amzn.to/3xPSKhJ Pro-Kleen Hot Tub & Spa Anti Foam amzn.to/3OwJtB2 ClearSpa Bromine Tablets 1kg amzn.to/3L64pg1 Clearwater Chemical Starter Kit amzn.to/3Lc2BSU use the test strips every so often as this will help you learn your spa water quality and treatment plan. If you feel the water is off definitely use the test strip as it could save you from a full drain down and refill just by adjusting the Ph and chlorine/bromine levels. Floating duck chlorine dispenseramzn.to/3Ml9GRl not it video as we got it after ;) I could do a video on how to treat the water thanks for the idea I will consider doing it. I hope this helps all the best David

[@wild_mike2906]

Mine said in the instructions to fill it between the min and max line :)

[@BrenTeckITSupport]

Hi Bigbird It may well have been in ours as well, I honestly can't remember now. But still between is not that helpful. All I know is if you fill it to the max and have two small to medium people in, it splashes over. Bear in mind it's designed for 4 to 6 according to the packaging. I feel the 4 is the comfortable max, with six is a very friendly party ;) So, a number of persons marking would be a nicer rough guide like ---- 6 people Min --- 3 people mind point ---- Max one person -----, in my opinion than just min-max. So the more people you plan to have in the spa the less water you have in it. Kind regards and keep well David

[@conormallon3051]

Great video. Is it really noisy at night. If you leave it heating at night would it annoy neighbours?

[@BrenTeckITSupport]

Hi Conor, When heating it only circulates the water with the heater on so it is very quiet. It's the bubbles that make the noise so no need to worry. :) If you want to hear what it sound like when heating just jump to 35:07 in the video or click the link kzbin.info/www/bejne/p53Qdmh6ibWemJI All the best and keep well David

[@caroldavies793]

when you empty can you drain onto the garden or will the chemicals harm the plants ?

[@BrenTeckITSupport]

Hi Carol, The simple answer is yes it can damage the plans and grass so its best to get it down the drain using a hose. Is there a pond or river near buy as the chemicals can affect plants and animals there as well! The long answer is..... It should be safe as long as the levels of the chemicals are not high as the water in the hot tub should be at a reasonable level and if you are packing it up the levels shod be lower as you probably have not just put more chemicals into the water just to pack it away. If your water in the tub is green and smelling then it will probably be safe as the chemicals have been used up and no longer being effective. If there the water is crystal clear and a chemical smell then it will kill somtihg. No matter what don't empty in near your prised roses they probably won't like it. Also, you have to think about over waiting for some plants, as this will be a lot of water going in the ground at one point in one time. Please be careful and responsible for disposing of chemicals. Please see the two links for more information they do contradict each other a bit but both are correct. www.cobbittyturf.com.au/will-pool-water-kill-your-lawn/#:~:text=IF%20YOUR%20POOL%20IS%20CHLORINATED&text=However%20as%20the%20chemical%20is,pool%20should%20not%20kill%20it.&text=Undiluted%20chlorine%2C%20on%20the%20other,easily%20damage%20plants%20and%20grass. hottubownerhq.com/can-i-drain-my-hot-tub-on-my-lawn/#:~:text=Chlorine%20and%20bromine%20are%20both,it%20from%20ever%20growing%20back. Rember there is Chlorine added to tap water to help sterilise the water we are drinking. Well at least in the UK I hope this helps, keep well and enjoy the spa this lockdown. David

[@jasonpower6769]

The power rate of the heater is 2050W (i.e.

[@BrenTeckITSupport]

Hi Jason Thanks for your comment, I would agree with you sound right to me. But if in doubt always ask a qualified professional electrician. All the best and keep well David

[@Rob-zw5qs]

Hi there, I was going to get one of these but the 7 metre cable just won't be long enough to plug into the mains - do you know if there's an extension lead on the market which would be safe enough to use? Thanks!

[@BrenTeckITSupport]

Hi Rob, Looking at the reviews amzn.to/3ueuAdI someone is using this for there hot tub and a 1.25mm core can take a max of 13amps up to 3120 Watts so this should be fine. Please remember to uncoil any extension cord completely to prevent overheating and damage to the insulation and do not let the ends get near any water. If I could find a thicker 1.5 or 2mm core extension that was rated for 16amps I would go for that but can't find any. If in any dought please speak to a qualified electrician. Ideally getting an outdoor socket installed on a dedicated circuit is best but it can be part of the final ring circuit. All the best Dave

[@johnnixon3100]

Smart plug is near to useless as the rcd uncouples when you turn off the current . Ie you need to push the button on rcd to switch back on . So to recap you can use the smart plug command to switch off but NOT to switch on xx

[@BrenTeckITSupport]

Hi John, Yes, Smart plugs are near to useless as the RCD will uncouple when power is lost so you will have to manually turn it back on by resetting the RCD. This is why I love the new Lay-Z-Spa Milan Airjet Plus with WiFi kzbin.info/www/bejne/nKDaY36Xn5h5iMk as this answers all the problems with a smart setup and give so much more potential which we will be exploring in future videos, so I hope you have subscribed as once this is done you can save a lot of money. All the best Dave

[@classixuk]

This was pretty much my afternoon! “What’s these bits for?” Lol. The instructions could be so much clearer. Are you still enjoying it? Did you use it through Winter?

[@BrenTeckITSupport]

Hi Classixuk, Glad you found out what the bits are for lol, seems everyone is in the same tub with this. In the UK with freezing temperatures in winter, we can not keep it set up all year unless we insulate the spa and pump as it will freeze and crack. I have it at my parents at the moment as we are helping them set up their new home so lots of work to do there and it is still amazing to relax in so glad we got it. I hope you get a good few years of enjoyment and relaxation out of yours. Kind regards and keep well David

[@BrenTeckITSupport]

Hi again, I just found this out the new 2021 models apparently have a rapid heat system (this could be marketing as if found little about it) and Freeze Shield as well so looks like they are improving the pumps all the time they even come with WiFi now. Might have to upgrade our pump at some point as they are backward compatible. :) Kind regards and keep well David

[@richardjones3032]

When inflating using the machine is there a cut off to tell you that its inflating to required amount??

[@BrenTeckITSupport]

Hi Richard, No there is not, you just have to wait for about five minutes according to the instructions. Keep next to it and check till firm and then stop, it really does not take too long. Use this time to make sure all the ports line up with the holes in the side for ease aces when done as you can move the blader and outer wall before it gets two inflated. I hope this helps. Kind regards, keep well and enjoy your spa David

[@superbrit3845]

Thanks fella, the instructions are absolutely shocking by toady's standards so this video certainly helped.

[@BrenTeckITSupport]

Hi Super Brit, I am glad we were able to help. Hope you are enjoying your spa now you have it all set up. Kind regards and keep well David

[@superbrit3845]

@@BrenTeckITSupport Cheers pal, yes I am enjoying it but two things. I didn't realise just how much electricity it uses plus the guide for how to use the chemicals is poor. Did you find both as well?

[@BrenTeckITSupport]

@@superbrit3845 Hi Super Brit, I know it would about double our electric bill before we got it as we are very energy efficient here. So a big water heater will make a massive difference to us and most people hence we also got sola panels kzbin.info/www/bejne/b5_TfZ2PpZxsp6s at the same time. I also got a 10 Ft Round Solar Pool Cover Blanket for Spa amzn.to/3uZMgrp to keep the heat in overnight / when not in use which does help a fear bit. Now I am doing more video work and upgraded my PC which is now very power-hungry when crypto mining. As for the chemicals yes they are confusing instructions and so much testing in them. I just play it by eye. if my eyes sting, I have too much chlorine in... If the water gets foam or green foam I add more. That is how I do it. I simply top up the chlorine after use, change the filter, and keep bromine tablets in it all the time. Thow I do have to say follow the instructions not my way for safety and hygiene LoL. All the best and keep enjoying your spa during this gorgeous Sunny weather we are having. David

[@deantrain2live96]

Like to say thank you The instructions were rubbish but you saved the day.do not know how anyone could give you the thumbs down.one question, you mentioned you had 2 filters mine only has one but 2 places to put one .is this ok?mine is the Paris version.all the best Dean

[@DrJonathanRoss]

it only needs one filter, which screws on near the bottom of the side wall....

[@BrenTeckITSupport]

Hi Dean, Thanks very much for you comments. Jon is quite right you only need one filter which attaches to the bottom of the two holes on the inside of the spa. Mine came with 2 standard filters and 1 filter housing. This was back in 2019 so they may just pack 1 filter in now for cost cutting. There should be in a parts list of what is included. Thanks again, keep well and hope you enjoy your lay-z-spa. David

[@BrenTeckITSupport]

Hi Jon Thanks for the quick reply much appreciated. All the best and keep well. David

[@ritchierich9407]

great video. i have this hot tub. i just fill it up with hot water when i want to use it. unfortunately, i don't have a proper outdoor plug. i have a summer house which is powered from a heavy-duty extension, i don't have any problems with any electrical items in the summerhouse eg oil filled heater, and a TV. I have used the pump to keep the water warm a few times ( not if the TV or heater is on. ) not had any issues with it. However, after watching your video i checked the online hot tub safety page and It says on their that the pump will work off a 13amp. but it also says not to use from an extension. I'm guessing this also means a heavy-duty extension.... I have an RDC inside the house, will this trip if i use the heater if there's a problem. Safety tips off the webpage Our hot tubs run on a UK standard 13amp/240V electrical supply. You should always use a grounded socket with RCD protection. All of our pumps come with a built-in RCD unit as a safety measure. The socket that the hot tub is being plugged in to should be grounded and at least 4 metres away, at a height of at least 1.2m from the ground. We recommend getting a qualified electrician to install a grounded outdoor waterproof socket with RCD protection (this should always be done by a qualified electrician).

[@BrenTeckITSupport]

Hi Ritchie, The reason they say do not use an extension is most use a thin cable and so will have too much electrical resistance and heat up and melt the extension cable which could start a fire. Also, make sure the flex is fully uncoiled first to prevent overheating as well. Someone heavy-duty extension cables start that they are suitable for a 3kw fire. If so that should be OK. As long as it plugged into the ring main and not a spur socket for the same reasons. If your setup is an outdoor reinforced cable straight from the ring or consumer unit (fuse box) and you only use the spa or the fire one at a time not both together it should be fine. If in doubt always ask a professional electrician to inspect it. If a professional installed the cable you may well be able to use both at once, again seek professional advice. A ring main is normal 2.5mm solid core X 2 to make the ring, one in one out. An electrical shower extension is normally 6mm or 10mm core but can be up to 16mm. I hope this helps Kind regards and keep well David

[@jakemartin8382]

What is the plug head like for the LEDs? Is it just a standard plug head or is it bulkier? Just wondering because if its bulkier then I won't be able to close the cover on my outside socket . Thanks

[@BrenTeckITSupport]

Hi Jake, it's a standard plug with a short flex to the transformer which you are meant to mount to the wall, then another sort bit of flex to the LEDs so it will fit into your waterproof socket without a problem. :) I only show it for a sort bit at kzbin.info/www/bejne/p53Qdmh6ibWemJI so be quick on the pause butting if you want to see it. Kind regards and keep well David

[@jakemartin8382]

@@BrenTeckITSupport thank-you very much, very informative

[@BrenTeckITSupport]

@@jakemartin8382 Hi, You're very welcome glad I could help. We have been so busy redoing my office I am hoping to get a desk back in over the week so I can get back to editing. Hope you are enjoying your spa dring this lovely summer we are now having. :)

[@josephzibara7265]

I do have a problem that nobody have mentioned : when I inflate the inside seater and I fill the tub with water, the seater goes up with the water! How to keepit at the bottom?

[@BrenTeckITSupport]

Hi Joseph, Filling the cushion with water is better than air. But it will still floats, just not as bad. Get as much air out and as much water in as you can. Hope this helps. Kind regards and keep well. David

[@freelegal]

Now I would have checked the LEDs *before* fitting to the tub (and probably after as well.)

[@BrenTeckITSupport]

Hi MyTube, Yes a very good point. A quick test before every install is a must I should have said that thanks for posting it out. Kind regards and keep well David

[@freelegal]

@@BrenTeckITSupport I have the 2021 version and the pump/heater is stated to max out at 2050W at 220-240V - which is less than 10 amps! I installed 10A cable and it is fine - though I will probably uprate that to 13A, just to be safe. (Though I did install a double socket, hoping to have a spare - but now it's for the LEDs.) I also didn't bother to try flatten the LED cable (But did unpack/unroll it a few days in advance!) - just made sure the LEDs were pointing into the tub. They look ok. Connecting the pump was easier if I did the big air connection first (as that has little give) and then the two pump connections. I found that out the hard way. The 'chemconnect' is not intended to float, but to be put on the upper pump outflow :) - and don't use it with chlorine granules, only with tablets! The clicks between closed and open as dosage settings, I think. Can you tell I set mine up yesterday? :)

[@BrenTeckITSupport]

@@freelegal Hi again MyTube, Yes, it's for safety to have a higher-rated supply cable just in case of an overload or extended use causing the cable to heat up and break down or melt the insulation. lol I can just see The granules they provide going every were with that dispenser. I switched to tablets straight away, did not even try them in there. I sprinkle some in after every use as a top-up. We set it up again at my parents' last week and had the fun and games of getting the LEDs to lay fat. They love to do the twist like they did last summer. I must say the Lay-Z-Spa does seem to be very well made in terms of safety as it does internal checks to make sure everything is wired correctly before it will turn on. But always get a professional to put in an extension for your tub. (I hate disclaimers, I hate the thought of getting sued more though lol) Have fun and relax in your spar David

[@freelegal]

@@BrenTeckITSupport Actually, I am still running with 10A cable and no heating of the cable even in use when the heater and bubbles are on. (It even powers my 500mA water feature too :) ) I am fortunate to have a background in industrial control systems, so a basic socket installation is a doddle.

[@vivienlaw1242]

Just had a lay z spa Paris and watched your video. Just a couple of things our three nozzles do not all line up with the spa. What do we do. Can you help. Also we do not have the bubble floor mat you showed but We have bought our own lay z spa round mat.

[@BrenTeckITSupport]

Hi Vivien The bubble mat should bee in the box if not check the packing list they may have changed it from 2019 but I doubt it. So you may need to contact them as it could have been left out. The three nozzles should line up after it's been fully inflated so if you have not inflated it yet do not worry, infant it first. If they do not line up after send me a photo I would need to see what is happening to know for sure. Did you get it new or 2nd hand as it could be packed wrong if it's 2nd had it might not be a complete matching set? I hope this helps Kind regards and keep well David

[@leewilson179]

We did not get one of those bubble floor sheets with ours either... but we had purchased a lay z spa mat so im sure it will be ok, im presuming they dont come with them mats anymore 🤷🏼‍♂️

[@BrenTeckITSupport]

Hi Lee, looking at the new product description it looks like they may have drooped it. probably due to the increased demand this year. So really have to recommend the Bestway Lay-Z-Spa Floor Protector amzn.to/2O4wjQH to keep it safer and warmer. All the best and keep well David

[@leewilson179]

BrenTeck IT Support weve got the lay z spa floor protector (jigsaw mat)... lol. Thats probably why they dont supply the mat you got with yours so as that you spend another £40 on that one

[@carolbell7532]

the lowest ring of the tub won't inflate is this normal? its a st tropez

[@BrenTeckITSupport]

Hi Carol When you say the lowest ring of the tub won't inflate is it a full size ring and the same colour as the rest of the tub? If so something sounds odd and may be best to contact the manufacturer as it could be faulty. Or is it a smaller one inside the tub probably transparent with holes in it? If so it's probably the bubble jet ring and it only files with air when the bubbles are on. I assume you already have it set up so try and turn on the bubbles and see I that's the case. Hope this helps and thanks for the comments. All the best and keep well David

[@paullee5445]

it is time of the year again to put the hot tub up dave lolo

[@BrenTeckITSupport]

Hi Paul, Yes it is. I am just so busy catching up with video editing whilst waiting for the kitchen work top to arrive so I can finishing building our new kitchen I don't have the time to evict the pigeons that are living under our sola panels before I can set up the Lay-Z-Spa up. LOL if it's not one job its another. Take care enjoy your Lay-Z-Sap and keep well Dave

[@RomeoJohnsson-Montal]

how noisy is the unit when idle when not in use?

[@BrenTeckITSupport]

Hi Remeo, I assume you mean heating the water without the bubbles if I am right you can hear it at this point in the video kzbin.info/www/bejne/p53Qdmh6ibWemJIsi=3OxQIsIDlDwLf-31&t=2107 but in real live it is a bit quieter then this as the mic is making it sound a bit louder. If you mean when it is not heating the water then it is completely silent. There is a newer version which you can see here kzbin.info/www/bejne/nKDaY36Xn5h5iMksi=OsfPMYhwWiSqSG5h Hope this helps all the best Dave

[@ashleyf1817]

Very helpful pal as the instructions were crap👌

[@BrenTeckITSupport]

Hi Ashley, Glad you found the video helpful. I hope you had a lovely Christmas and wish you all the best for 2021 David

[@hackettdavid]

Hi there, you say that it draws 16amp but I can't see this in the instruction book , also the book says its a class one but the lay z spa Web site says its a class 2 , then you have to fit an electric ground rod. Could you help me on this.

[@BrenTeckITSupport]

Hi Hackettdavid, The fuse is 13amp but it draws less under normal full-load operation. Grounding rods can be fun depending on the soil type you have so may need earth neutral bonding done if you keep getting the 6cf or e06 error or you could have a loose earth connection in the plug socket. If in any dought contact a professional electrician who will be able to advise you. Some of the rules and installations can get very tricky. I run ours of a dedicated spere using at least a 4mm grade cable (from memory) and normal house earthing without any problems. It's best to be safe with electricity and get the pros in. All the best David

[@hackettdavid]

I've checked the fuse in my pump plug and it's a 13 amp fuse. I've got the 2021 paris model. And the pump states that it's pulls 2050 watts

[@BrenTeckITSupport]

@@hackettdavid Hi Kackttdavid Yes, it's probabley a 13amp fuse in a 13amp plug I have not checked mine yeat as if could even be a 10amp as I use www.rapidtables.com/calc/electric/watt-volt-amp-calculator.html and so it could draw only 8amps but that sownds a bit low to me. Where do I say it's 16amp so I can try and update it. The fuse is to protect the flex, not you or the device just the cable from the plug. Thanks for your coments, kind regards and keep well David

[@1970alx]

Just setting this up, the lights are a nightmare! I can't get the led strip up the right way it keeps going back onto it's side. Also the 2021 model did not come with a bubble underlay. Less than impressed with the instructions, thankfully I have your excellent video!

[@BrenTeckITSupport]

Hi Alex, Yes, yes they are but keep trying it's worth it in the end and will help to prevent them from damage. Do it slowly and work your way around. You might find it easier when up the right way with a small amount of water in to help hold them down a bit of weight not to force them flat as that could damage the PCB table. I hope this helps. Kind regards, good luck with he LEDs and keep well David

[@jayrichardson5474]

So does this have WiFi the 2021 cause half the places I look it does half it doesn't

[@BrenTeckITSupport]

Hi Jay, I get your confusion, their website leads you to believe that the whole 2021 range has WiFi but it would appear not every one has it. It could be a labeling issue or price point management. I suspect it's the latter as others have said that there new 2021 did not come with WiFi. The one we have is an older model so does not have WiFi. All I can recommend is reed the product dimensions carefully and if there is any doubt contact the supply before and perches. I hope this helps, kind regards and keep well David

[@jayrichardson5474]

@@BrenTeckITSupport yeah bud looked into everything more and it doesn't but I'm just put WiFi boosters and that around the house to try boost it. Great video BTW. Mine should be here Monday

[@BrenTeckITSupport]

@@jayrichardson5474 Hi Jay, It's a shame they did not make WiFi standard, it's the one extra I really want on our one as I could set it to heat up when we have sun using the solar panels but now I have to just use the buttons. :( Perhaps we will upgrade at some point but for now, I will stick with what we have. The joy of getting WiFi around the whole house. I have been using the Asus RTAX88u kzbin.info/www/bejne/oX2ldHSenKyYnMU which has been great but moving to ubiquity now. David

[@mackenziewatt8859]

The piece that u didn’t know what it was for is for deflating the tub Faster If u Go on KZbin and ask for Deflating lazy spa quicker So Ye ahah 😄

[@BrenTeckITSupport]

Hi Mackenzie, Yes you are very right that's what there for. You can see it in my newer video Lay Z Spa Pack up kzbin.info/www/bejne/mHyXnqyMmNpmjas where I pack it away. I make all my videos on the fly, no script no research and no prep. We are on the unboxing journey together. :) I will add your search words to Lay Z Spa Pack up video as well, thanks for the info, great help. All the best and keep well David

[@JRDSmith]

Very helpful, thank you, after 3 days the seller still not come back to us! with the request to help, we can not find the unit number anywhere or the serial number they keep requesting! I'm not impressed with the after sales service so far Jonathan.

[@BrenTeckITSupport]

Hi Jon, Sorry to hear this. You should be able to find you S/N: on a large silver sticker on the back at the top of the bottom half of the pump unit. If you want me to send you a photo I have a one ready for you. Just contact me via my site www.brenteck.com, facebook.com/BrenTeck.IT.Support/ or mobile.twitter.com/BrenTeckIThelp so can send it to you. Kind regards and keep well David

[@derekfrail1970]

A full day to two days to heat up? Takes few hours with lid on bud lol

[@BrenTeckITSupport]

Hi Derek, It all depends on the temperature of the water going in the first place. But I found it heats up about 1-2 degrees per houre with the lid on. The new 2021 models apparently have a rapid heat system (this could be marketing as if found little about it) and Freeze Shield as well so looks like they are improving the pumps all the time some even come with WiFi. Kind regards and keep well David

[@leew8812]

the Canapé ?:D

[@BrenTeckITSupport]

Hi Lee, Did you spot a spelling mistake of Canopy as Canepe? If so were so I can fix it or are you just trying to make me hungry? Kind regards and keep well David

[@jayrichardson5474]

28:30 don't by the bigger protector its awful apparently doesn't protect from wind and no instructions. I'm waiting for my hottub atm and might buy a shed

[@BrenTeckITSupport]

Hi Jay, Putting it in a shed would definitely help keep it warm and the wind out. Only thing is it may be more noisy and you would lose the view of the sky and garden. I would cover the walls in soft fluffy fabric like towels to absorb some of the sound. Also think of ventilation so condensation does not build up on the inside. Let us know how you get on, kind regards and keep well David

[@jayrichardson5474]

@@BrenTeckITSupport well the plan was a £200 build for it and have a mounted TV and then like see through roof that started to increase in price massively when waterproofing the floor. So now I'm putting it in the carport sealing up one end then a gate and other end with a higher gate. And thank you ill let u know

[@BrenTeckITSupport]

@@jayrichardson5474 Hi Jay, I have to say I think your new plan is great using a carport is something I am thinking of doing as well. You get to keep the view and are better protected from the weather. Please keep us posted on what you do. David

[@kev008ify]

My lay-z- spa cover keeps deflating, has any one else had this problem.

[@BrenTeckITSupport]

Hi Ecogreen, Our one is fine, both the tub and lid. Both will deflate slowly over time and need to be reinflated but only once every couple of mounts. If you are needing to do it more then once a mount you may have a faulty valve or a small hole somewhere. Take the air bladder out of the cover, give it a good clean and look for leaks. I would put a bit of it in the hot tub and rotate till I see any doubles. Or you could spray it with soppy water an see were bubbles form. Once you find the leek use a repair patch and cover the hole. I have a feeling the lay-z-spa came with a Vinyl Repair Kit for Hot Tubs. I can not find mine now so I could be wrong. You can get one form here amzn.to/3irB692 I hope this helps, wish you all the best and keep well David

[@kev008ify]

BrenTeck IT Support hi, it’s just my cover that is deflating, but from new it’s never stayed up for very long. It’s only about 6 months old.

[@BrenTeckITSupport]

@@kev008ify Hi Ecogreen. In that case, it might be worth contacting lay-z-spar support and see what they have to say. I would also still check for leeks as it should be under warranty and you might get a replacement lid sent out. Good luck David

[@paullee5445]

it is 19-21 and we have no review on the hottub lolo

[@BrenTeckITSupport]

Hi Paul I might do a follow-up review video later. Lol all the videos I want to do later. I must say for the price of the Lay-Z-Sap they are well worth it. We have enjoyed it over the years and have not had any problems with it so far. The canopy has started to fail and so will probably buy a new one this year if I need to. Kind regards and keep well David

[@andycassell1136]

The black plastics are to deflate the hot tub.

[@BrenTeckITSupport]

Hi Andy, the screw on plastic caps that go on the inside when you take off the filter and chemical chamber so you can remove the pump unit without two much water loss.

[@andycassell1136]

@@BrenTeckITSupport sorry i meant the black screw in one that goes on the air pump its for deflating the hot tub, most people try to push and fold the air out when they pack away. this takes all the air out for you.

[@BrenTeckITSupport]

Hi, it might help if I uploaded the pack-up video I have recorded. We are in the end stages of installing a new kitchen for my parents. Then installing a smart kitchen for us. So filming and editing has gotten messed up. I will work on it today for you. Thanks for reminding me to do it.🤯 If you subscribe and click the bell notification button KZbin will let you know when I upload the new video.👍

[@BrenTeckITSupport]

@@andycassell1136 Hi Andy, I have now uploaded the video showing how to pack up the lay-Z-spa you can see it here kzbin.info/www/bejne/mHyXnqyMmNpmjas Thanks for your question, I have mentioned you in the titles hope this is ok and that the video answers your question. All the best David

[@ml4491]

Andy didn’t ask a question - he was letting YOU know what they were for as you thought they were for another model of spa. Bloody helpful is Andy.

[@JammNickk]

You left the cable coiled when blowing the tub up. Daft idea especially with that amp amount.

[@BrenTeckITSupport]

Hi James, Very sharp eyes and you have and a good point. You must fully uncoil any lead when using a device especially extensions leads to prevent overheating. In this instance I was only using the air pump which has a very low power usage so is not a problem at this time and it's outside on the cold bricks so will not overheat. When using the heater yes, yes you should uncoil the flex fully to prevent the cable from overheating. When working on AV cables again always uncoil them, not only to prevent overheating but to prevent interference so you get a cleaner signal. All the best and keep well. David

[@JammNickk]

@@BrenTeckITSupport Well said David, thanks for confirming that for everyone. I would like to say your video was very informative. We ordered ours last week, pending a 2 month delivery date in july! I now know how to set it up however! Thanks again J

[@ritchierich9407]

what happens if you leave your cable coiled up?

[@ritchierich9407]

I fill the tub up from a hot tap, so don't need to use the heater a great deal, could i use an extension from the house with a RCD on the extension in the house?

[@JammNickk]

@@ritchierich9407 faradays law of induction. Coiled cable at higher amp = heat generation. Long periods of time, like a hot tub on in direct sun can be dangerous. Although video creator is correct, less of a issue with a draft and cold concrete. But live by the rules and you'll live longer 👍

[@KR155_]

Can you learn to say canopy instead of canopé ? Good video, thanks for the info.

[@BrenTeckITSupport]

Good Morning KR155 It brings me great joy that you found the information in one's video stimulating. I wish you good health and success in your very own KZbin endeavours. Kind regards David

[@ciaranh5907]

Takes too long

[@BrenTeckITSupport]

Hi Ciarans, Thanks for your comments but please elaborate. What takes too long in your opinion? If you are referring to how long it takes to fill this will depend on the water pressure so will vary from house to house. Heating the water hot water as you fill with cold, this could also fill the tub quicker. I hope this helps, thanks for watching and commenting. Wish you all the best and keep well. David