I’m loving this Layout thing so far. Don’t stop! Keep up this series until I get it correct! 😆
@jasonhook66574 жыл бұрын
Just getting into Layout so this and previous video are spot on for me! Keep them coming!
@douglasmichel63614 жыл бұрын
Hey Arron, in creating view ports, I usually create one to start with, for example, plan or top down> then I copy that viewport and drag it down so it’s in-line with plan view and then change the content to an elevation view. Occasionally when I change view ( both at same scale) the copy will shift over to the right or left. No longer in-line ( contents that is) with contents of the original viewport. I know it has to do with positioning of model back in SU. How do you recommend setting up scenes so this shift doesn’t occur in layout? Zoom extents, zoom all, etc???? Thanks
@aaronallen778911 ай бұрын
I'm trying to figure out how to zoom and move inside the model view. At around 9:30 you say to double-click inside the model view to do this, but when I double-click nothing happens. Am I missing something?
@choiceglobal94182 жыл бұрын
Please can u give me specification of laptop I can use to run this software smoothly.
@maurotadeuaraujopereira4 жыл бұрын
VERY GOOD! Mauro/Brasil
@natashajowett54603 жыл бұрын
This series is fantastic, thank you - SO helpful! Please keep them coming!!!
@sergioquevedo43314 жыл бұрын
Hi Aron, you´re amazing as usual. Thanks a lot for this Layout video series. It´s a must wanted series.
@LeeKeiser4 жыл бұрын
It is hard to follow because the video resolution is about 1/2 of your screen. Also sad to see Apple being used. I will never run an Apple anything and neither will most of the world. Thanks for putting it up.
@richard219953 жыл бұрын
Totally agree, Apple is ridiculously over priced and copy righted software and not at all versatile, Windows and android devices, open source software can run every application out there.
@devenshah30614 жыл бұрын
Awesome explanation. Thanks Aaron.🙂
@Simon-Simon-Simon2 жыл бұрын
why when in RASTER image looks more like in model then when re render in HYBRID in my case one section fill is wrong
@SketchUp2 жыл бұрын
Sounds like a potential issue with your model. The best way to get help would be to post to our forum (forums.sketchup.com). KZbin comments section is a horrible place to try to troubleshoot modeling problems.
@jayshockey54614 жыл бұрын
Love this series Aaron!👊🏻💪🏻👏🏻👍🏻
@stojanovik693 жыл бұрын
Can you make videos about : - How can Sketchup Drawings be used for PPA's and Patend's Drawings ? In my opinion : Inventers an Produkt Developers would like to know more about "Sketchup" - Drawings
@arlanmoncada78263 жыл бұрын
Can someone help me with my problem? I'm experiencing now a problem with my model. It is not appearing in my layout when i tranfer my model from sketchup. And there's an exclamation point on bottom right side of my viewport. I've already set my autorender, but nothing happens. Anyone can help me with? Im using sketchup and layout 2020
@bilalalkhos90552 жыл бұрын
What do you mean by modifier key?
@famcivilengineer344 жыл бұрын
Layout is a great tool for construction documentation, however sketchup need to be move on from just a 3D modelling software to a BIM software like ACCA software doing with there edificius software, Aaron i recommended you please take a look at edificius its truly a BIM software.. Sketchup need to be change with time, if sketchup team refuse to do so they will lag in race.. Time of 3D is over, its BIM time.. Thank you
@famcivilengineer344 жыл бұрын
Sketchup+Layout are powerful software..but its need to be move on from just being 3D to 7D...
@mrbrianjhewitt4 жыл бұрын
I'm having an issue with the Label tool in Layout. Sometimes it puts a box around the label and sometimes it doesn't. Any quick fixes? Thanks.
@VictoriaDoane6 ай бұрын
Thank you for this! I'm new at this and literally everything you say is helpful. keep it coming!
@BryghtKnyghtMedia3 жыл бұрын
At the end of that segment you said "that's an important piece, SketchUp Pro one-to-one modelling". Please expand on that.
@alexandrknyaziuk2 жыл бұрын
How is that grid visible underneath the objects but not on top of them? What I see in "document options" are only two options that permit to a). draw the grid under the viewport or b). show it also in viewport BUT also to draw it (in contrast) over the entire model.
@JaniChetankumar4 жыл бұрын
Will hope to provide 1st angle /3rd angle drawing tutorial of object in SketchUp layout.
@melissalaird20062 жыл бұрын
Thanks so much for this series,,,, I'm starting to figure out Sketchup but had no idea how to use Layout. Now I know where to go to figure it out.
@FelicitasMode Жыл бұрын
Thanks it helst me alot
@immersionoutdoors3472 Жыл бұрын
Thank you for this video really helped this self taught newb
@fajaralim3652 жыл бұрын
So how do I measure the tiny feature like door and windows without 'breaking it down' in Sketchup? I'd like to see something like isolate group and hide the rest.
@richard219953 жыл бұрын
Such a great tutorial, very interesting the way you explain things, one question when you say model everything 1 to 1 are you meaning not to change the scale ?
@wernermathijssen2842 жыл бұрын
Hello, These are fine lessons, i'm a fan. greetings Werner from Belgium
@praveenr76244 жыл бұрын
Hey aaron In SketchUp options, Refresh and reload option is not available for windows. Can you make a quick win on it...plz ?
@AaronMakingStuff4 жыл бұрын
What version are you running? I believe that was introduced in 2020...
@jamie7364 Жыл бұрын
always the best - thanks so much Aron!
@FelicitasMode2 жыл бұрын
Great info , now I have a LOT to do and practice
@richardvankesteren70134 жыл бұрын
Thanks for the video. This serie finally helps me explore layOut.
@timbertailorslondon4 жыл бұрын
This is helpful for a gentle taking off the ground. Thanks Aaron and team!
@mischritch4 жыл бұрын
Good video Aaron. I would really like to see a video series on modeling some hi-def architectural elements similar to what Holygon does. So clean!
@panjang153 жыл бұрын
Great need more from you... Hahahaha
@victoreisenman40762 жыл бұрын
This is great.
@utv201006174 жыл бұрын
Thank you for the tutorial -- great one!
@bhanupratapsinghgoud89553 жыл бұрын
Awesome lesson 👍
@biancamoreira18394 жыл бұрын
Love it ! Thank you
@Bohaan4 жыл бұрын
На Русском нет?
@mkadd19904 жыл бұрын
I've always wanted to explore layout, I'm glad that now I am going through it with you guys on these amazing tutorials, looking forward for more episodes to come on this subject 😀
@susannehultin21294 жыл бұрын
Thank you Aron. I have two question -first how can I change language in LayOut - by mistake I got Swedish in SketchUp and in LayOut - managed to change in SketchUp but not in LayOut. I want it in English as most tutorials are in English. If you could give some hints on this it would be great. As I do garden design drawings I have my plantlists in Excel and I have managed to import it as a tabel in LayOut - but I would like to keep the format I have in Excel (with every second row in color, text styles etc) also in LayOut - can you give me some tip on this, please?