Is it possible to replace only the front glass,not the whole lcd?
@CrocFIX5 жыл бұрын
Only if you have experience. The LCD is cheap, so not worth the effort
@songokuhPL7 жыл бұрын
Thanks for the guide! Everything works fine until i put battery to the main frame. Then touch going crazy. When battery is outside frame everything is just fine. Should I isolate battery in some way?
@CrocFIX7 жыл бұрын
I think it's not the battery problem. It could be the flex cable itself or check the small connector for the touch on the flex cable if it has a good connection. Sometimes it helps if you add a tiny piece of tape on it, so it doesn't move when you place the battery on the top.
@johnmhyrcarlet54887 жыл бұрын
Hi. is it possible for me to transfer an LCD and Digitizer to another Sony M5 with different models? E5603 to E5663
@CrocFIX7 жыл бұрын
Hi. Yes, if you buy only the LCD without the Frame.
@johnmhyrcarlet54887 жыл бұрын
CrocFIX Thanks a lot! even if it is from a broken M5 with good LCD then transfer it to another M5 with bad LCD.
@CrocFIX7 жыл бұрын
You are welcome. Yes, you can. But as I said...only the lcd without frame. Cuz you cant transfer a single sim frame to a dual sim frame M5. But only the LCD you can. Be carefully when removing the lcd. Its fragile ;)
@hunthunt54797 жыл бұрын
where can I buy that back cover sticker ? mine phone (same model ) back cover opened
@CrocFIX7 жыл бұрын
You can find the link for buying in the video description LCD and Back cover Adhesive
@hunthunt54797 жыл бұрын
CrocFIX if I replaced my back cover , waterproof function still working ?
@CrocFIX7 жыл бұрын
Normally it should if you clean the frame properly and use waterproof adhesive. But it is not 100% sure. So you know it will be at your own risk.
@ΑΡΗΣΚΟΡΝΑΡΑΚΗΣ7 жыл бұрын
CrocFIX is comon for these, the back cover opening?
@ada-adasaja22847 жыл бұрын
hay mas I want to ask LCD sony exsperia m5 type 5663 how many
@CrocFIX7 жыл бұрын
Hi. If you mean the price, you can see the link in my video description.
@hendroharyanto4 жыл бұрын
Battery is glued like crazy!
@AykutA7 жыл бұрын
It worked but the notification light is not lit. I removed the screen is very broken. I was so harder...Could I have been broken the LED?
@CrocFIX7 жыл бұрын
The led is not working or the light of the led is not strong? It could be damaged, or maybe you covered it somehow?
@rockytaylor467 жыл бұрын
the glue for the screen ended up covering my led, just left it in risk of breaking the screen
@patriciacar97837 жыл бұрын
donde se pueden comprar las hojas azules de pegar
@CrocFIX7 жыл бұрын
Qué quieres decir
@Erik-eo5mj7 жыл бұрын
Despues de hacerlo todo no se ve la pantalla.. Que puede ser.
@CrocFIX7 жыл бұрын
Tal vez el conector o tal vez una pantalla defectuosa. Prueba la anterior nuevamente si la pantalla todavía funciona para ver si obtienes una imagen
@urbantraceurmva6 жыл бұрын
After theinstallation, the screen goes black... its turned on but nothing appears! help
@CrocFIX6 жыл бұрын
Check flex cable connections, reinstall...try again. Maybe you have a faulty screen
@iqbalreza7 жыл бұрын
After the replacement, the screen turn out black couple of times. soft reset just remove the problem temporary. Any clue to solve this?
@CrocFIX7 жыл бұрын
It could be a bad connection to the motherboard. Try clean the connector on the board and the flex cable and reassemble again. It could be also some kind of short circuit somewhere after assembling. And the very bad thing...it could be a faulty part-lcd screen and needs to be replaced.
@iqbalreza7 жыл бұрын
Thanks. Do you reckon any potential cause related to software? I will try to clean the connector and reassemble again. I just replace the lcd-screen with the new one, would be a shame that the part is faulty.
@CrocFIX7 жыл бұрын
I don't think it is an software issue...but it could be. You can try a hard reset, but do a backup of your data first. You can try also to reflash the software with Sony's software Xperia Companion in recovery mode. Also sometimes it can be a motherboard fault, if the damage was heavy. You can try the software stuff first and then ask for a LCD replacament if it's under warranty.