Le sertissage

Sertissage en Grain sur bague or jaune, 132 diamants de 1.8 mm

[@gerry0543]

I am a Diamond Setter for over 50 years and I fully understand how intricate this kind of setting can be. This style of pave' setting is the epitome of diamond setting. No mistakes are even allowed. Someone said this takes too long to film, I believe the project took over TWO DAYS from start to finish. You are a skilled craftsman!!!...Gerry Lewy from Toronto, Canada.

[@maudale]

Hello Gerlad, I was reading your comment and was wondering if you could tell me how one becomes an apprentice for these high jewellery brands, and where one would learn to make all the building blocks for any design thrown at you... Thank you :)

[@laetitia2686]

Vidéo tellement satisfaisante, un travail que j'adorerai réaliser enfin tentet 😅 sûrement pas le même rendu également mais que c'est beau ❤❤❤ Superbe 👍

[@khabirimrane8145]

Quel charme technique, délicatesse de travail et prestige de savoir faire, excellente vidéo ✨

[@ioannatak5758]

I just started studying to be a jewel crafter.... I 'm only in the second semester and after this video I realised I have so much to learn..... but I can't wait!!!!!

[@DantonCulus]

This is the spirit ! Patience is essential too to build experience. As long as you are interested, nothing is impossible.

[@sustainingtheworld]

This is mind blowing! Thank you so much for sharing this video so that rest of us aspiring silver/goldsmiths can learn and understand techniques and continue to be inspired by this craft.

[@henriqueandrade7691]

Olá, sou do Brazil, joalheiro a 25 anos, e posso dizer que nós somos felizes por ter este contato íntimo com as mais belas joias da natureza. Parabéns pelo seu trabalho.

[@muratcicek2441]

Henrique Andrade Hello, I am writing to you from Turkey Murat jewelry manufacturing and repair stone polishing insert the branches I'm looking pretty experiencing job ihtiyacimv help can you help me thank you [e-mail]

[@SayaraDaCostaSoares]

Travail minutieux et d’une finesse 💁🏽‍♀️

[@MrZimms950]

Super vidéo. Merci d'avoir pris le temps de le faire. Moi, je ne fais que des vidéos montage de photos car je n'ai pas assez de temps pour faire comme vous! Très belle pièce au fait! :)

[@barbarasouthall4782]

So beautiful. Only a master jeweller could make such a difficult process look so effortless.

[@pinback3977]

I'd have to agree. I don't know too many other jewelers my age and it's sad. I'm 22 and and went to jewelry school right out of high school. I love studying the different stone setting techniques. Jewelry is my life and I plan on making it for the rest of my life. To the complete master jeweler/stone setter in this video: Amazing work, this piece has truly inspired me. I've watched your video over and over. Thanks for sharing.

[@muratcicek2441]

Pin Back Hello, I am writing to you from Turkey Murat jewelry manufacturing and repair stone polishing insert the branches I'm looking pretty experiencing job ihtiyacimv help can you help me thank you [e-mail]

[@doctoreview]

wow es un trabajo hermoso!!!! felicitaciones orfebre!!!!! muy delicado y fino anillo!!!! saludos

[@jayeshsoni2024]

kzbin.info/www/bejne/fniQnJZmgdemnLs

[@rosyjobya]

Many, Many Thanks for your generosity and having shared your beautiful craft with the rest of us who really appreciate Beauty. Cheers.

[@jayeshsoni2024]

kzbin.info/www/bejne/fniQnJZmgdemnLs

[@pinback3977]

You are a master of your craft. Thanks for the inspiration.. Blake Meigs, 22 year old bench jeweler

[@maish27]

piece of work.Made me smile.

[@matkodosen5635]

Speachless, that is amazing work!

[@dmca0808]

Tienes razon,Vivo en España y pasa lo mismo,ahora trabajo en restaurantes que me deja mas dinero,me encanta ser engastador ,pero no puedo vivir de esto,saludos desde Alicante ,España

[@darojobe]

truly beautiful. a work of art

[@sergiomandaliani]

thank you for ur reply,u seem a very kind gentelmen,and yes u are right ,if u have only one size of stone ,this is the best solution.as i mentioned in my comment before u needed different sizes of stone.

[@kevinpigny101]

tu fait de très bon boulot . réalise tu en pour des client sur le net ?

[@lorfevre971]

Quel bonheur !! quelle perfection !

[@marcos71011]

MUITO BOM !!! PARABENS !!! ESTOU APRENDENDO CRAVAÇÃO AQUI NO BRASIL QUANTO CUSTA PARA CRAVAR UM ANEL DESSE AI ?

[@Castorios]

The only stones I set were in the game 'World of Warcraft'. Left click on the desired stone to set, right click on the ring to be set on... ;o) Awesome video, thanks for sharing !

[@chechnya]

How does anyone have the patience for that? I'd be flipping over tables.

[@kfadrat]

in this ring, are only 2 prongs holding each stone or 4 each? I am not a stone setter, thats why i dont fully understand it.

[@SayaraDaCostaSoares]

Tout un art!

[@danielemilegeorges7373]

Aliène, le retour. Regardez bien, de profil

[@DiaaDumar]

My friend simply it`s great good job keep going Good lock ...........Diaa

[@Jacquim9991]

I really loved this video, incredibly inspiring!!

[@jayeshsoni2024]

kzbin.info/www/bejne/fniQnJZmgdemnLs

[@RohrbachJewelryDesign]

Brillante producción!

[@kevinpigny101]

C'est quel pierre que tu utilise stp ?

[@TheGreenzgal]

Beautiful, Excellent work!

[@ManyiVijoux]

I would love to learn but very few masters take on apprentices who have not been through a formal education and as you say, the business is dying away thanks to cheap factories. Still, I know I'd love to learn!

[@sirspikey]

looked cool just with the holes :P

[@Magia0901]

very beautiful :) great job

[@sendonherve]

une grande beauté !

[@briangman3]

how long did it take you to make that?

[@xarchais]

you are born to craft this !

[@Hodwolf]

Dingue ! C'est trop beau :O

[@DantonCulus]

This is the sad tendency in many fields.... I guess that in the end, people will have to reduce their personal needs to the minimum in order to being able to continue doing their vocations. I also guess that the only positive point is that we will have a better estimation of what is valuable in this life, leading to a lesser consumerist lifestyle. But the transition will be tough, very long and very hard to bear while rotten people govern us.

[@the13thful]

hello im a diamons atone setter from philippines if its me to work on that ring i will start a line from the wall of the ring and the take a compass to measure the stone and so on.

[@pintusasmal8234]

joshua mawili 9752491676

[@hellenlima2951]

Que arte linda

[@koujikusu]

beautiful.....Good job!

[@powerkyokushin]

Excellent !!!Very impressive THANK YOU.

[@McPrfctday]

I didn't know there was no adhesive used when setting diamonds. I didn't know they were pressed into the gold like that.

[@ajeetkumaryadav8073]

Stone setting tools ki bhi jankari milegi

[@rainbow78280]

mais un truc que je n'arive pas a comprendre c'est comment les diamants font-il pour tenir sans cole oO????? l'or est travailler pendant qu'il est encore mou ou quoi?????

[@habibbendouzane2786]

Bon travail

[@marcelokonzen3612]

show de bola, muito lindo..

[@ajeetkumaryadav8073]

Kya hame Hindi me jankari mil skti hai yhi

[@pikepeak1]

a oui , joli travail en passant...peace

[@essamfeldt]

Tres Belle Bn Continue

[@Vid304You]

What's the song from 2:40 ?

[@jonathanrpdf]

agora eu quero cer esse cara ai fazer a do Predador.rsrsrsrs

[@IFIXCASTLES]

please don't disappear craftsman....

[@mk196a]

all I can is WOW!

[@soundtrackiwalkto]

I am 25 years old and live in New York. I'm in transition, both looking for a job and waiting for college to mail me back some papers. I have to say that I have fallen in love with gems and jewellery, it is a perfect combination of art and science. After this round of degrees I will be going to G.I.A for my Graduate Gemologist diploma. I have a bunch of rough stones and some polished stones, what I'm asking is, would anyone in NYC give me an apprencticeship? I have to learn, can't wait anymore.

[@kadakado453]

Bonjour, comment appel ton l'outil(pièce a main pour faire un filé) pour tracer utilisé dans la [vidéo 4:24] ? merci

[@kadakado453]

l'echoppe est combiné un truc pour que le traçage se fait tout seul si vous voyez bien il ne fait aucun effort pour tracer 4:24 il manipule seulement, je cherche le truc qui fait vibrer(pièce a main) l'echorppe. merci pour votre repense

[@douro20]

Could you imagine the consequences of making even the slightest mistake on that sertissage?

[@ArkEsoteric]

Anyone know the music?

[@fahinoryvalenciarivera]

espectacular!

[@NikaNet100]

Awesome video, thanks for sharing ! :)

[@Brandon_masse56]

man that was cool

[@mrartwatcher]

cow jewellery. nice

[@jonathanrpdf]

é a cabeça do Alen mais cara que deve existir

[@moshezig1]

amazing

[@rohitbajracharya7058]

i need those hand tools.

[@2011smvms]

Великолепно!

[@TheCarlito005]

nice

[@draganakostic6852]

Prelepo ,bozanstveno

[@GunMaster5248]

woooh bro thats small

[@gedisonfabiano6893]

Parabéns.

[@lesFILMSgratos]

je me regalle a regarder sa ^^¨

[@DantonCulus]

The bigger the population, the more rich people... yes... but even more poor people also, so the percentage of rich people is even thinner... Money is like a cake, the more people, the smaller the parts... and the more rich some people are, the even smaller the slices of cake for the rest... While the abstract concept of economy can be infinite, the real world can't follow as it is finite and so its resources...

[@vuthuyphuongtrang6563]

Bellissimo

[@ТатьянаРазепина-д5ъ]

завораживает

[@donglabong]

lets see some of your pave settings then?

[@josemanueljullopez9221]

Necesitas un curso de engastado porque asi no puedes engastar 400 gemas en un dia, eso no se hace así, y lo siento decir, solo tengo el ánimo de construir y no de destruir, si te lo digo es para que busque otra forma mejor.

[@sergiomandaliani]

I'm a jeweler ,and i think the way this ring is set wrong,because its not pave since the distribution of the stones is not done right,such work should be started from the center and there should be used different sizes of stones so that it comes out perfect.but i like the tools that is used .thank you

[@SimpleUser11]

May be yes, may be no... You know, the bigger the population on our planet, the more rich people. People, who want something exclusive, hi-end. Cheap asian workers can`t satisfy this kind of customers.

[@bijakovici15]

tagliato tutto con la fresa..

[@leonida9771]

You drilled the holes in wrong pattern...i have 20 years of experience in micro pave setting.

[@patchavz5685]

I m a jeweler to , and you know... when you critice some body elses work...you creating a doubt about your self...!!

[@accesskb]

whatever... there is no right or wrong way. Get a little creative and try new ways. Solve it based on each unique project. Don't be a hard and subborn head and do it like your great grand father did. Expand your mind and try to find new ways to do it ;)

[@MrLestan]

de grâce utilisez un macro et des videos de meilleure qualité !

[@1964csilva]

$$$$$$$$$????????? No more to say

[@dashakh]

You can find the device at GRS grstools.com