Zach Littlepage from PSIA-AASI’s Official Supplier Swix/TOKO takes you through the dos and don’ts of tuning and waxing your skis in this tuning demo.
Пікірлер: 68
@outofreach53702 жыл бұрын
Man this guy would not be happy seeing me ski all the way to my car through the parking lot !
@gibby2315 жыл бұрын
Was there another follow up video on scraping and brushing after waxing?
@michaelaldrich89943 жыл бұрын
Exactly.
@shredcavemedia37645 жыл бұрын
tough crowd... you guys shoulda had some beer there
@gregormiller40375 жыл бұрын
LOL...beverage of choice when I ttune:)...Could never understand why my skies were railed:)
@t_c52662 жыл бұрын
i wanted to tune my skis to save a few bucks instead i got presenting with $1000 worth of equipment
@nurtayurdabayev88002 жыл бұрын
I wish he explained the why's behind the angles he chose. The part where he explained the waxing process is well done.
@pitur54922 жыл бұрын
all nice but i think he heats up the ski too long, too much, half of it is more than enough, i mean preheat wax and 2 passes max
@allensarkozy41094 жыл бұрын
I worked in a ski shop for 20 years learning how to hand file skis in the 1970's, I always started with the edge filing first and then filed the base to debur the angle flat compared to the base.When beveling became popular I learned to adjust the angles slightly with masking tape over one end of the file for better edge holding. The new file holders are a tremendous tool to do this properly. Nice video though and it's very important to explain how many steps the modern skis need to be tuned properly.
@Sagina19995 жыл бұрын
No lube with the stones! Bad. Destroy stones. Dragging file backwards! Bad. Ruin file. A Swix guy not using Swix Glide Wax Cleaner prior to waxing? IDK about that. Need to remove grease and other junk from base first. Brush alone not nearly as good. Better than nothing though. When waxing the edges were too cold. That's where the base burn starts. Need to tilt iron to heat metal edges up. They are a heat sink and pull heat out if the base. Need wax absorption all the way to the edges.
@cratra3 жыл бұрын
Exactly, need soapy water on the stones which helps remove grit, allows better cut/polish, allows smoother movement and prevents the diamond stones from wearing out so much faster. I suppose when you get all your tuning gear for free you don't have to really worry about this???
@Sagina19993 жыл бұрын
@@cratra Yea, always use water at least! I mix water and denatured alcohol. Next way to ruin a diamond stone is using too much pressure. If I have a really bad edge, I wrap some 220 wet sand paper around a stone and use that first, before I file or stone.
@cratra3 жыл бұрын
@@Sagina1999 Another thing I find bad for tips of 100mm diamond stones along an edge clean tune is Magne-Traction. This cuts into the tips and wears the ends out excessively. So you need an edge tune device that holds the stone along its width rather than length to prevent this wear.
@Sagina19993 жыл бұрын
@@cratra Yea, I've worked over a few of those skis. I've always just used a small portion of the file and stone, so for me, it was about the same.
@gregormiller40375 жыл бұрын
I can really appreciate improvements in tech. I just used a 12" mill bastard to try and flatten the base. De-tune the tip and tail and guess at angle. One I was told, always go in one direction with the file, to the tail....great post:)
@MJXtube3 жыл бұрын
From this video, I DID learn how to wax my skis: pay a proper technician to do it.
@ZynTig3 жыл бұрын
Same😭
@johnwatson81922 жыл бұрын
Maybe we need a video on how to assess a proper technician 😃
@ThatSB Жыл бұрын
Dude, it is super easy. You dont need to be this thorough
@visarbrestovci90295 жыл бұрын
I have a pocked edge tool that is only intended for side edges (skiman brand). The problem is that when i switch sides i can only use the file from tail to tip. So one side of the ski I can sharpen with tip to tail strokes and the other side i must do it from tail to tip, so if i change the direction of the file i must change the angle to. Is that a factory defect or they just didn't make it correct. Does sharpening one side with reverse direction impact the sharpening process. THanx
@shannonsutorius39442 жыл бұрын
Crap I’ll just purchase new skis!
@mirodanis72612 жыл бұрын
Which way to flip the file while doing your side edge? The rougher side or flip it around?
@Cutlerypotato4 жыл бұрын
Every time I watch these tutorials I go man this is complicated, I can't be bothered
@shelekhov4 жыл бұрын
They just need to sell millions of those gear. It is way more easier. Considering how most services will tune your skis, you might do better with just a couple of files.
@firstsacker3 жыл бұрын
Back in the old days, we would just use wraps of tape on the bastard file to get the bevel on the edges. Progress is good.
@michaelaversa55727 күн бұрын
Yup. Three wraps of masking tape was one degree.
@mcmurph1014 жыл бұрын
Just use the KISS method brah
@mitchryder98914 жыл бұрын
Come on man never push those files forward but only in the direction the ski slides
@Snorkl78794 жыл бұрын
He's only applying pressure when moving towards the back of the skis. He's a pro, he knows what he's doing.
@maxshriver4 жыл бұрын
Jeremy Liem you can’t actually go both directions. Running down the ski is only important working with the base of the ski/ waxing.
@kingschuyler38903 жыл бұрын
But what if I ride switch?😃
@austingillem53124 жыл бұрын
Starts working on a dynastar ski, at 1:05 there’s a DPS on the bench 🤔🤔
@vavas984 жыл бұрын
good remark
@_cameraboy4 жыл бұрын
@@vavas98 The magic of editing in b-roll.
@TruckeeNuts2 жыл бұрын
Yeah wtf??
@vvdd9039 ай бұрын
bunch of older people in audience
@fisherman6953 жыл бұрын
If you’re waxing and you see you can also tell that when your not true to the angle once you see all the time it’s the same way as all the hahahaha I’m so stoned ......
@TCSC472 жыл бұрын
Lol! When Zach holds up his bevel guides at1:18 I thought "No way! That is far more than 1 deg!". Thankfully for my education he immediately goes on to place it in position on the ski and all is revealed as they say!
@geniusmarcsays24345 жыл бұрын
so i will wax it when i want more speed... for now i'll keep them as they are
@Luca-ft1kv5 жыл бұрын
It doesn't make you faster, it just decreases the friction of the ski on the snow and allows it to glide better. If your a beginner or intermediate rider who isn't comfortable at speed, your better off sticking to easier runs than not waxing your skis. It actually makes it more confidence inspiring when at high speeds if you have a well maintained ski, as it reacts predictably and smoothly to your movements. An unwaxed ski will feel really sticky, especially in powder or slush, and a ski with poor edges will feel really twitchy or unstable when lent over. Sure, an advanced rider can still ride well with crap skis, but that's down to experience and confidence. When you lack both of these, its helpful to have a good ski to give you every advantage you can get
@philippe52495 жыл бұрын
Yea you really should wax them. It's like keeping a bike tyre uninflated until you know how to ride, sure it will be slow, but also inconsistent/dangerous and it kills all the fun. It's better to learn how to brake.
@gregbisesi99664 жыл бұрын
Philippe52 Plus it keeps the base material from drying out. I had a pair of skis that I neglected to wax for a season, the base got a light whitish haze and after that it never would absorb and hold wax. After like 2 days out the skis were slow and dragging badly. So I’d have to wax them after a full day out. Just my experience. Learned my lesson and I wax all my skis regularly and at the end of the season when they get stored.
@jseski92094 жыл бұрын
JCW, P52, & Greg B are all correct... and to add to their knowledge - waxing (as shown in the video), gets wax to soak into the pores of the ski base, providing a little extra durability. A dried out base will be more prone to scraping & gouging, whereas a waxed base will resist that damage (not that they can't get damaged if you ski over a rock or branch or something, but the waxed base will be damaged less than an unwaxed/dry base). You want to wax your skis.
@MaxAcceleration Жыл бұрын
@ 1:32 Did Zach eat Cheetos beforehand?
@michaels12932 жыл бұрын
Seems to me that the base edge sharpening he is using will result in a convex shaped base. Holding the file at an angle, but flat will result in a flat ski. Convex bases result in the ski hooking.
@phil72184 жыл бұрын
He said "bastard".
@grujenkins3 жыл бұрын
As far as scraping wax. You want to have a sharp plastic scraper WITH NO BURS! I always like to use long strokes with little pressure until you have little to no wax coming from the ski. If you have a metal brush use it first, if not use a horse hair brush. You always want to go from most course to least. Always go from tail to tip, this is the best way to get the wax out of the structure.
@justonmanville2 жыл бұрын
It's almost like you should do your own video
@philippetesta74433 жыл бұрын
Before filing the edges i always check if the sole is flat!!!!!!
@Buciasda332 жыл бұрын
Damn, that's a lot of tools...
@tomwolfe19835 жыл бұрын
Gloves
@chrismartineson4612 жыл бұрын
Beer or Martini! Hilarious!
@Айболит-у4г2 жыл бұрын
1:04 - ski DPS !!!
@markludwin473 жыл бұрын
Great video, Zach! I miss skiing on a ski that you’ve tuned!
@Jay-kk3dv Жыл бұрын
Some good ASMR here
@grujenkins3 жыл бұрын
Great presentation, however you always want to do the side edge first. The microburs should always be parallel to the base of the ski before polishing the edge.
@BobHatcher-od8xd Жыл бұрын
What setting/temp for the iron?
@GeirHegreRomundset8 ай бұрын
Depends on the wax you are using. There will be instructions on the package. Usually somewhere in the region of 110-150 degrees centigrade.
@jeanboisleduc52553 жыл бұрын
thank you! couldnt be better!
@zbynekcodykolacek3 жыл бұрын
Nicely ✅
@johannwinkler21834 жыл бұрын
11:03 do that step in the other direction it helps a lot
@trizz90724 жыл бұрын
Wonder how many people ruined their skis because of your dumb comment
@johannwinkler21834 жыл бұрын
Trizz I got that tip from a guy that works for the Austrian race team (Europacup),and it works!
@trizz90724 жыл бұрын
Johann Winkler you’re supposed to brush it from tip to tail, like the snow slides under the ski
@johannwinkler21834 жыл бұрын
Trizz yes after you waxed your skis before you wax them you do it in the other direction
@loganlee84524 жыл бұрын
Those skis r ugly af
@arnelarson28494 жыл бұрын
Don't worry Logan, they're women' skis so you probably don't need to worry about being seen on them. And by the way, the Dynastar Cham 97 were great all-mountain boards.