Big Auto Water - Deep River!! How to install drum pump suck water from Big River for Big Farms.

[@mohanmanchaiah5685]

You teach science with excitement it is helping thousand of farmers. Thanks lot

[@bonifacioortaliza9998]

It is wonderful, it helps a lot of farmers who will watch your video. Thanks man.

[@alinardelean-j2w]

In the end, there are very few life skills that matter in life and make a difference. None of those skills are thought in the westen societies. Hat of to your work, brother, amazing. Thank you for sharing. Peace and love from Europe!

[@naishowmunemo3728]

🎉

[@Pitoumotorsport]

tu,es trop con toi !

[@thoykhammanee942]

Ok

[@Pitoumotorsport]

il n'y a ici aucune compétence, juste un type qui prends ses freres pour des cons....

[@mikaeltetealu-yy3lo]

Wow wonderful, it worked, I will try this to my fish pool at my farm, thanks yours content is very helpful ❤

[@VioletaColarteMagallanes]

Your so very creative sir, job well done, thank you so much for showing us your invention, god bless you sir,

[@PercyKChatterton]

Very creative and innovative video. God bless you and thank you for sharing your God-given talent.

[@japatechBR]

Man! Tks for sharing this technology. It will help many people around the world Amazing auto water! Best regards 👏👏✌️🙏✌️👏👏

[@IrshadAhmad-w3o]

Very good Information

[@natirt7327]

Very good technology

[@imranelektro3862]

what he did was right. because, the end of the outlet pipe is lower than the water source (river). so surely the water will flow smoothly. look at 15:20. it is very clear that the output is lower than the source

[@zumbafosto]

Yes. If he removes the drum and one of the fill pipes would do the same thing, only simpler and cheaper.

[@axmed711]

@@zumbafosto you are right, but I think the drum is just adding a high sucking pressure into the equation

[@hasannamli1156]

Bu paylaşımın için, sizi Kalpten kutlar tebrik ederim. Nice Elektrik olmayan Tarlalarda köylülere destek vermiş olduğunuz için kalpten teşekkür ederim. Allah razı olsun. 🤲🌎❤️🕊️🤲

[@trucaovan]

Bịp nhau à rõ ràng là nước ngoài sông cao hơn bên trong ruộng ??? Chỉ việc kẻ nước vào là xong ???

[@eddyvanesch9589]

So the worlds energy problem can be solved by this! Pumping up water for free. This man deserves the Noble prize!!!

[@edgardoalipio8611]

It is very helfull for those in the remote area that there is no electrical power supply keep up the good work

[@le260440]

Prachtig idee , eenvoudig en zeer praktisch. probeer het voor mijn mijn vijvertje te maken.

[@Eisndudjd]

Thank you very much for sharing

[@gip8796]

МО ЛО ДЕЦ !!!, КАРАСИВО ПРЕМЕНИЛ ЗАПЕРТЫЙ В ЗАМКНУТОМ ПРОСТРАНСТВЕ ОБЪЁМ ВОДЫ. подписка, лайк.

[@akirimau]

Great successful experiment ! The outlet pipe size assisted with gravity created high vaccum which the intake pipe unable to compensate, the result is high sucking power. Since the outlet deliver full 60mm capacity the vacuum power deformed the metal drum. Maybe can control the volume of water going out by installing a ball-valve at the end of the delivery pipe, to balance the input and output so that the drum will not deform.

[@kwaknitl-2guide318]

sir... good day.. so this system is true? that the outlet pipe is higher than the inlet?

[@jaymarbreguera591]

@@kwaknitl-2guide318 i don't think so. if it's higher, it will not flow continuously and eventually stop when the strength required to suction the water from the river and the strength of the gravitational pull in the output pipe become balanced, as the volume of water in the drum decreases the water flow going out decreases also little by little until it will eventually stop.

[@chantiolangpajuh3411]

Hii Bhai i want to order it can you help me to get it and please tell the prize also how much

[@butchs2337]

@@jaymarbreguera591 if the water did not keep going into the barrel the barrel would keep bending, so it has already sartopped, it is bringing in the same amount of water as is fgoing out, it is a simple siphon nothing fancy, it just looks fancy design, you could do the same thing with 2 valves and a tee and a cap and pipe, valve on each end to hold the water in the pipe and fill the pipe at the tee and then cap the tee when full and two people open the two together and you have a siphon

[@kjellg6532]

@@butchs2337 Yes you can. But the barrel adds two benefits: no foot valve (here plastic bag) is needed in he river. No need to take any bath. Secondly, if there is a minor air leak in the system, a barrel can accumulate some air and make this siphin running for a longer period.

[@richardrotor2462]

Your video can give an idea to the people have'nt enough money to buy generator specialy in asian country..thank you so mich..God bless.

[@josepha.sangma701]

Thank you so much for your kind valuable sharing your ideas to the subscribers and it will be helpful to our farmers 👍

[@kijampangalktw3800]

Terimakasih ilmu nya...salam kenal dari indonesia

[@mehdishalchi]

Thank you for sharing your experience with us. Please don’t worry about what others say I think it is very good of you. God bless you ❤

[@baladebmajhi6625]

You9😅😊😊

[@prasadrs100]

Siphon Tube

[@jalilovsherzod2942]

Яшавор гап йук ;молатци;

[@ravindrareddykesireddy2479]

Good free farm🚜🐄🌾

[@angelitodelacruz5320]

God Bless you, bro, you a wonderful knolenge,

[@compostsfertilizers5471]

Use the big welding gas cylinder. This is incredible. It is an excellent development you are sharing today. WOW !!!

[@rajeshnain180]

good idea

[@jumaadabubakar4572]

Awesome idea

[@frankcgriffin3695]

Ee

[@compostsfertilizers5471]

@@jumaadabubakar4572 Also visit 'dunia kreatif' channel for much simpler tank but same idea.

[@joeenriquez6572]

L

[@longkochannel9726]

Terimakasih ilmunya, saya suka banget video ini sederhana tapi idenya cemerlang ❤❤

[@hossamhassan1310]

الماء نفس المستوى تقريبا فى الجانبين

[@ofwvlogerstv6781]

Thank you for your vedio now I have a knowledge...God bless.

[@lakers24a94]

Thanks for the video it was so helpful for me to save money on my farm. I suggest if you could put mesh filter on the pipe that go's in the water for the safety of small fish or any other river animals.

[@amilagayan727]

A joke, river is higher than end of the out pot pipe😂 Just enough a pipe to get water under gravity

[@omar65ff30]

​@@amilagayan727 Yes, that is the TRUTH in this video

[@DrZero5779]

@@amilagayan727even so, the drum is higher than the river. Suction still there

[@winstonpanggabean7425]

Terima kasih bro buat karyanya..sukses

[@zamkholalkhongsai2799]

Great experiment. No matter what people may say it's an excellent information 👍. God bless you 🙏

[@JaySmith-ce6zm]

Great Job my friend. Thank you very much. Good luck.

[@icicicles]

If all you want to do is pull water over the hill/burm into the other water source then you don't need the tank. Just pick your size pipe and put a ball valve on the outlet side then submerge the pipe to fill it, close the ball vale and carry the outlet side over the hill/burm. Now all you have to do is open the ball vale and water will continue to flow. It's a siphon just like you had but without the barrow/stand. Water leaving the pipe creates a vacuum on the inlet side. It is simply volume displacement. Your barrow crushed because you were closing off the intake while the outlet was still displacing volume.

[@Dingsrud]

I think the collaps of the barrel is theatre. The plasic bags closing thevfilling studs, they hold!

[@icicicles]

@@Dingsrud The theatre is they don't need a barrel. This works like a pump if you need to draw water higher then the sourse and outlet, but clearly this is not needed here.

[@Dingsrud]

@@icicicles A barrel may be practical to prime the siphon. One do not need any foot valve and no need to take a bath in the river to remove any plastic bag at the suction side. An alternativ is to suck the whole tube in water to get it filled with water. This set up is a siphon with a starting barrel, it is not a pump. No siphon can lift water to a higher level. Water level in source usr be higher than discharge to the field.

[@icicicles]

@@Dingsrud Ya I probably shouldn't have used the word pump even though I expressed it like a pump, still wrong. Water does seek its own level so the outlet would have to be below the source.

[@indian9632]

Apppp0pppppàÀaaai00aa0l@EQ

[@luoihvlog190]

Chế tạo máy bơm nước hay thế bạn ơi mình thích xem

[@lucybiono2747]

Amazing. Thank you for sharing.

[@richardjaviergonzalescarri9332]

Gracias por la enseñanza,cusco Perú

[@sirbrianmw]

I built this system and let me tell you. This is the old siphon system. Nothing new. Why? If you look at the delivery pipe, it is way below the source of water. If you lift the end of the delivery pipe above the source pf water, it won't work. The drum with water is simply a large part of the the narrow pipe. The water in it helps start the siphon system replacing the old way of sucking the end of the pipe with mouth or anything to start the siphon system. Once more, the source of water must be above the end of the delivery pipe for any siphon system to work.

[@RenelSeva]

Thank you Sir for sharing the idea..God Bless

[@MrFoods-kv1cf]

Thank you for sharing your knowledge Sir!

[@chardonneretelwazzani]

Very very good.i encourage you.i am Moroccan man

[@Fedos-re6ec]

UZBEKISTAN ❤❤❤❤❤

[@rodrigotingson]

Done ✅ my dear friend ❤️ God bless you 🙏🏾

[@vijaysookdeo3813]

It's simply siphoning!

[@hussainassociate777hasnain8]

Nice job thanx a lot from pakistan

[@jaymarbreguera591]

do not deny it my friend. it's a siphon. it's true that the drum is higher but the out put end of the pipe is obviously lower than the river.

[@Gankiao]

you are right, he should not let the outlet so far down the field

[@BataMoya-uc7nv]

Thanks for your teaching

[@Brainwaave]

drum deformed because you took time to open the inlet pipe :)

[@Bikashpadhan-b1u]

Bro so much effort 😊 only single pipe can do this 😅 everyone know water comes from higher place to lower place

[@gustavodemelo7]

It worked because the water output is lower than the intake. The idea is to pump water from a lower point to a higher point. Try to drop the barrel past the valve, it's a higher point than the intake. If water comes out, then your pump works.

[@kjellg6532]

This is a facy siphon with a priming barrel. A siphon can not lift any water. Output must be lower than input for this to work.

[@kkselvakumar3110]

@@kjellg6532 Water is not elevated. It is transferred. Suction produced by long deliver pipe which has holding capacity more than 200 ltr. So the suction is very simple and the system is truly working

[@kjellg6532]

@@kkselvakumar3110 I agree on that. Only wated to piont out that this system workd fine if and only if the water level in the river is higher than the outlet to the field. Many YT videos clame that this is a pump and can lift water ‚from a deep well‘. That is not possible. Suction is produced by the difference in height between the outlett and the top of the drum, not from the length or volume of the delivery pipe. If you doubble the length of the delivery, the water flow will be a little less due to more friction in the delivery.

[@novelonlin]

​@@kjellg6532kau bodoh sekali,,, air mengalir bukan pengaruh tinggi rendah sumber air,, tetapi air mengalir karena daya hisap/ vakum dari drumm,, terlihat drumm memiliki perubahan pisik

[@aamerjamal]

Man one of our old man used same technology to get the water out of 120 meter deep bore... Its simple suction technique ... The water decrease from tank create a suxtion effect and the input pipe suckout the water where ever it find ...

[@raymundopassi4360]

Da best vloger no#1

[@autismchannel2388]

Water reserved in the drum is the one that flows not the suction from the river. Elevation factor plays a huge role for this system.

[@butchs2337]

yeap i agree it is just a simple siphon system

[@omarthiane3430]

If it was that the water in the drum ready finish The water out of the drum is running more then 10 mn

[@rusanyukaare179]

The water out of drum is creating a lot of vacuum to suck from the lake.

[@kkselvakumar3110]

@@rusanyukaare179 Water is not elevated. It is transferred. Suction produced by long deliver pipe which has holding capacity more than 200 ltr. So the suction is very simple and the system is truly working

[@prasadrs100]

Siphon Tube

[@armandotropaofficial2669]

Good job my friend watching here frm Philippines

[@duartenunomartins1025]

O nível da água do 1º reservatório está mais alto que a saída do tubo de descarga. Ó habilidoso, perdeste muito tempo bastava colocar uma mangueira de um reservatório para o outro.... Por mim, é nota negativa!!!

[@AbdulMuhammad-sy9uu]

Appreciate your work the genius

[@larryhamilton7630]

You need a pressure gauge to check sucking pressure and dual intake and you will pump harder the weight of the fall causes the sucking pressure. By increasing the diameter of your outflow pipe you cause more vac suction as you want more volume increase and it goes on and on if you keep raising your barell you can pump further and more volume

[@seetheforest]

All wrong my friend. Water only flows down.

[@Alex-um4fe]

@@seetheforest so trees move water up how , with a man made pump ? Water loves water ...

[@seetheforest]

@@Alex-um4fe no one knows, it's a mystery.

[@kjellg6532]

The suction tube is same diameter as the output. No need to waste any money on dual intake. With the output at the center of the drum, half of the barrel volume are not active! With a priming drum there is no need to jump into the river, just theatre. There is no need for closing the inlet in the river. If you do, you should open in he river before opening the output to prevent air from sucking in from the output.

[@seetheforest]

@@Alex-um4fe so magic barrel pumps work on the same principal as trees?

[@الهيبةالهيبة-م9ح]

El tambor se puede llenar hasta por debajo de la entrada del agua para que así exista mayor presión de succión y las llaves de arriba cerradas! Al aperturar la salida el agua tratara de salir y producirá un vacío que es la que lógicamente succiona el agua pero todo en la parte superior siempre tiene que estar bien hermético para que no se pierda el vacío y logré funcionar!

[@Grahito.Channel]

Bego

[@Arty-vy6zs]

No es ni necesario el tambor metálico, colocando solo el tubo ya funciona, a eso se le conoce como principio de sifón, el agua circulara a través de la tubería mientras el nivel del agua de donde se succiona sea mas alto que la salida de agua del tubo.

[@ThanhTanOfficial-gp8wz]

Chúc mừng bạn thành công .❤❤

[@НуржанЖусипов-я7х]

Сюда никакой насоз не нужен. Просто сделай арык. И вода самотек идет вниз

[@thomaskanth5402]

Thank u so much bro I'm from srilanka

[@stevesilos4402]

TO THE MAKER OF THIS VIDEO: The water level in de river or canal is clearly much higher than the ground level of the field. Can you please give us the difference in of the water height relative to ground level

[@jaymarbreguera591]

I agree on you.

[@TheRebelmanone]

It is just a fancy looking syphon. He said he wanted to save money, so all he needed was pipe, check valve at the input, with a tee at the highest point in elevation the pipe has to travel in order to go over the dam from the river to the field, it will syphon once you get it primed. Better yet, if he wants to really save money all he needed was a shovel. The river is clearly higher than the field.

[@Gankiao]

@@TheRebelmanone you are right, please show us without the outlet going so far down.

[@Dingsrud]

@@TheRebelmanone you may make it even simpler. Close the output. Fill the tube from the top and dip the suction pipe into the river. If the grater part of the tubing is below the water level in the river, you do not need any foot valve at the suction end. A smal drum can be practical for starting this siphon.

[@archibolzapata7096]

Como se llama la música de fondo es buena música avisame por favor GRACIAS

[@EricPastoi]

Keep it up brother. From meghalaya

[@rusanyukaare179]

It deformed because you open the outlet valve while the inlet( the pipe in the lake) was still blocked, I do understand why you did that but check valve at the end would have prevented it.

[@HariYanto-ev8yd]

Very..very good... Thanks

[@Josepena-he9ek]

itlooks like the river water level is higher than the end of dischare end

[@bobotanian8149]

I think so. Maybe only need a strigh line pipe, the water Will flow

[@kimbingaemery990]

​@@bobotanian8149😢😢

[@najasyam5328]

Ya that's right no need drum to flow the water, it's just a siphone effect due to the river level higher than the end of output pipe😂😂

[@MrBlackbird26]

vaav congratulations ......

[@ingussilins6330]

River like in a hill and this circuit can work without 200L bucket. ( simple siphon circuit )

[@thatha-ww4ir]

❤

[@paulcomputer]

This is Very helpful, thank you for sharing. Maybe we will use a smaller pipe so that sa drum will not deform. We will use water for dishwashing or taking a bath

[@kjellg6532]

Smaller pipe will not help. One must reduce the height difference between inlet and outlett.

[@butchs2337]

you should have opened the inlet side first that might have kept the barrel bending, and or put a valve down by the discharge and slow the water down coming out that would for sure keep the barrel from bending

[@rajrai8073]

Yes, you opened inlet too late that’s why drum caved in due to sudden and enormous suction. Once a cylinder fails it’s going to remain like that, but it doesn’t matter as the siphon still works to full capacity. I totally understand the issue here, so next time I know you’ll have at least a helper along with you. Even if you increased the inlet pipe the drum would still have collapsed because the failure was due to the outlet being opened first while inlet was still shut off. But it’s a great piece of innovative idea from which people can learn. Please make more similar videos for us all. Thanks

[@kjellg6532]

Pressure in the tank depends solely on the height difference between the inlet and the outlet. No valve can regulate that.

[@ipelum5942]

if you open the inlet water will come out and will leave the drum half empty or half full.

[@Wazafamily-mg2qg]

Iwant to learn more.If he had opened the inlet first it wouldnt have deformed.Secondly is their apossibilty for this to run for ayear if factors are constant

[@Wazafamily-mg2qg]

Now what would he have done.opening at same time or.iwant cos the idea is good

[@fayzullomahmudov5885]

Офарин дахшат

[@amonalysa1876]

This method works only when the tip of output pipe is lower than the water source.

[@aamerjamal]

No in my country an old man used samd suction technique to pull out the water from 120m deep drill bore but the problem he face is also the power of sucking is so strong it implode or deformed the tank

[@lawkeshkumardas3966]

@@aamerjamal t

[@lawkeshkumardas3966]

@@aamerjamal ry

[@Vishnukumarmandal610]

​@@lawkeshkumardas3966Jo j🎉🎉

[@adippadal6250]

TSuction Power is depend The output Pipe How much long

[@gerardor9004]

Woo buen trabajo exelente me gusto mucho grasias por esta muy buena enseńansa 👍👍👌👌👏👏

[@ZulkifleARahim]

In order to make it work the level of output pipe must always lower than the input pipe (source).

[@reynaldomarquez6216]

Your idea is just a simple suction process u can suck the water without d drum because the water level of d suction side is higher than d discharge side.it is a simple syphoon prosesss.

[@abuahmadalrafidi]

​@@reynaldomarquez6216 not that the idea but the one thing to be dont that the diameter of the outlet suck shoud be bigger to icrese the presure outle that reduces the velocity of the fuid acording to newton s law the presure of fluid proportional inversery with the speed in any fluid

[@somgrg2756]

@@reynaldomarquez6216 ,

[@TukangKebun-qv9bf]

Trimakasih sobat atas ilmu membuat pompa air tanpa listrik semoga manfaat salam sukses

[@zeothorn]

Your water level is higher in the river than the end of output pipe so you don't really need that drum to do that,i would believe that if your output pipe would go 50 m high up hill.Only a ram pump will work

[@georgedoclan7137]

that's true u dont need that drum , the water elevation is higher. this is the process of siphon.

[@seetheforest]

I find it surprising that only two other people know this "magic barrel pump" wont work. They say it's lonely at the top. And you can't syphon water up to the top of anything. Water only goes down.

[@CBA.YouTube]

Cần gì cái thùng xanh , chỉ cần mồi nước vào trong ống , thì nước sẽ chảy từ trên cao xuống .

[@cholesterol804]

He needs to do what he is repeatingly saying at the end off output no need drum

[@mutombkabamb8470]

Good

[@ابوزيدالمخلص]

استمر في خدمة البشر ولاتبالي لكلام الفاشلين تحياتنا

[@stevesilos4402]

Learn for Future: I would kindly appreciate it very much if you would respond to my comments. I have build the system exactly as you explain in the videos but it does not work. Is it possible that we exchange ideas to find out why it does not work? Thanking you kindly in advance

[@AustinAhxinn]

I did the same thing 1. Fill up as much water as possible, force the air out from the drum/barrel we are using. (both side inlet and outlet should be air sealed while u r doing this) 2. When the water overflows from that two vertical pipe, air sealed it. (Tips: I would suggest using 4 valve for all the holes, easier to operate and make a bigger hole at the bottom of the drum with an extra valve to clean the wastage that sucked in from inlet pipe, make it big so ur hand had access into it for cleaning or dealing with cloaking problems in the future. Do not use netting at inlet hole as it will cloak it as soon as some leafs being pulled over) 3. At the end of the outlet, open it up and let it run for couple second to create stronger vacuum in the drum. ( the drum deformed when he leaves the water running for too long time, but strong vacuum suction was created as well) 4. Open up the inlet and ur water will be running smoothly as they are filled with water without air in the inlet pipe, it makes the suctions stronger. *Just remember one thing, short inlet and longer outlet, just make sure no air running in from the outlet, then this system will work just fine, so valve is super useful. If the pipes are filled with water in the outlet before opening up, it will be fine. But if u let some air into the outlet pipe, this system will fail. Try it couple times to get the right vacuum suction u need, as different length of inlet pipe and quantity of airs going back into the drum do affects the vacuum power needed to make this work. Good luck!

[@crishtianoronolda1733]

Assalom aleykum men bu kursatuvni Janubiy Koreyadan tomosho qilayabman uzimni millatim UZBEK.Uzbekistonga borsam menham shunday vakkumli pompa yasashim kerak Alloh nasib qilsa ingliz tilini bilmayman lekin sizga habar yozayotganimdan hursandman juda Uzbekistonda katta katta unumdor yerlar kop lekin sugorish uchun suv kamroq bizda dengiz okeanlar yoq salomat buling habaringizni kutaman

[@stevesilos4402]

@@AustinAhxinn input water level must be higher than output water level. it is a siphon and nothing else. Let the guy simply tell us the height of the water inlet level relative to the water outlet level. That is all we need to hear from him. he does not say ANYTHING about that. WHY?

[@AustinAhxinn]

@@stevesilos4402 is basic of siphon. But some people tried it even with higher input and lower output still failes. The details in between matters

[@stevesilos4402]

@@AustinAhxinn details in between ??? I have build an air tight system. Filled it with water. inlet pipe also completely filled. Opened the outlet valve and you know what happened all of the time? Every time air is sucked at the outlet valve back into the drum.

[@charlesdiaz6974]

Thank you for sure your idea good job we appreciate it thank you brother in my current handy you never know when you going to need it thank you for sharing to the whole world you're a good man

[@larryhamilton7630]

To lower the vacuum pressure you must decrease the restriction by a bigger diameter suction pipe with a check valve and screen.

[@Dingsrud]

A lager suctiom pipe will innreise the water flow, but not change any presserende in the tank. When using a tank, no fort valve is needed.

[@BayNguyen-jm5rx]

Bạn giỏi nhất đấy

[@enthousiastiko3517]

You need to increase the diameter of the intake pipe to lessen the vaccum effect. High vaccum effect takes place inside the drum because of the drawing power created by the volume of water running through the length of your output pipes.

[@Dingsrud]

Noop. You can use any size of pipes. What maters is how high the drum is above the output.

[@SamartAuram]

Very good you🌿⚘️💗🇹🇭

[@esaumadzura]

Your drum was deformed because you opened the outlet and kept the inlet shut for too long!

[@emmanueltsatsaku5315]

vxo

[@emmanueltsatsaku5315]

a

[@deliaabalos8812]

Thanks for the good idea

[@stevesilos4402]

Has anyone commenting build the exact same system? I did, completely vacuum and it does not work. I am happy to discuss with anyone who has ALSO build the system exactly as presented in the videos.

[@kelvisonchristian7799]

Also I have not get the water. He lie us

[@bontv1245]

We do the same procedure but it did not work.. we will try next week once we visit to our farm but we try it by reducing the size of the inlet pipe..

[@victor9999hugo]

I saw other videos, its not possible

[@Dingsrud]

The outlet must be lower than the inlet for it to work

[@ObliviouslyGifted]

Did you release one side first below the drum level to pressurize it FIRST??

[@florenceolidar5497]

Thank you and this will help me to our rice field.

[@foeu12]

ce système ne relève pas de l'eau mais lui fait simplement passer au dessus d'une bute pour la rejeté dans un niveau plus bas que le captage parmi toutes les vidéos qu'y ont été mises en ligne par cet imposteurs c'est le seul système qui fonctionne car c'est seulement sur cette vidéo et pas les autres qu'il nous montre un petit tourbillon ce former a l'entrée du système et le bidon ce déformé sous l'aspiration dans d'autres systèmes où il prétend remonter l'eau de plus haut il ne nous montre ni le tourbillon ni le bidon ce déformé sous la précision normal car c'est système la ne fonctionne pas de toute façons ci ça fonctionnait ce monsieur ne perdrai pas sont temp a faire des video car il aurait inventé un mouvement perpétuel il suffirait de mettre une helice a eau connecter à un alternateur pour avoir de l'électricité gratuit propre et a volonté a l'heure d'aujourd'hui il serait sûrement multimillionnaire car sont système aurait étai racheter par les industriels du pétrole et du nucléaire

[@antoninomarino7990]

En somme c’est la même chose que quand on siphonne de l’essence dans un réservoir en plus gros quoi .

[@infousahakreatif]

Good 🙏

[@ประสิทธิ์สีใส-ม1ภ]

Don't be fooled, it's impossible,if downstream that flows higher than the original upstream where the water will be used, and there is no need for any extravagant equipment to deceive.

[@ابوزيدالمخلص]

وضح فكرتك؟؟؟؟

[@ziyadullaabdiyev1971]

Assalomu-alaykum. The level of water being drawn, located above the level of water spilling on the ground. That's why the vacuum pulls the water.

[@ziyadullaabdiyev1971]

It was necessary to demonstrate that it was working properly by pouring water onto the street. That's why I didn't believe this discovery.

[@observer950]

Idiot. It works

[@Alex-um4fe]

@@ziyadullaabdiyev1971 you should have your kids try it with buckets and plastic bottles straws and see for yourself.

[@pankajhalder4537]

Thank you sir

[@XuânBùiHữu]

Tuyệt vời bạn rât tài gioi

[@bioarasu9672]

Thanks bro

[@HakeemAsghar-u5b]

❤❤❤very good

[@shibajani9680]

This is the very good technical.

[@swapneswarbaliarsingh7861]

Easy technic and heavenly profit for farmer

[@redmi1390]

Beri God your work

[@dupreviljeanrobert4456]

good job

[@kodithuwakkubanduprema4918]

Good idia thank you are much.

[@RobertJail-zd5sc]

Seen one demo before,but it's quite costly,yours is quite or lot easier to follow up on, thanks 🙏

[@Dingsrud]

Even cheaper: simply use a tube or a stiff tube.

[@JericksAvila]

Nice teaching thanks 😊😊😊

[@mutalipov]

Hello uzbekistan. 👍