Leather Edge Creaser - A Buyer´s Guide -

A Buyer´s Guide for everyone who is thinking about buying an electric creaser.
In this Video I will show you an effordable alternative to all the expensive tools out there.
This Video was powered by YUCRAFT.
All the tools that are shown in this Clip can be bought on YUCRAFTs ETSY Shop.
www.etsy.com/de/shop/YUCraftPro

[@saintxie6730]

Lovely video, never thought I'd find a guide on this, Danke!

[@albertrich7890]

Lot of thanks for the video, such a clear explication

[@nosaltiesandrooshere7488]

👍 = there is nothing left to say! Everything perfect! 👍 = es gibt nichts mehr zu sagen! Alles perfekt!

[@gelonder4046]

Cool, deine Videos habe ich schon sehr vermisst. Beste Grüße

[@InXone]

Thanx a lot for this review!

[@michaellopez5960]

Appreciated you candid explanation, so pleasantly, now I am sure that I would like to get one of this creaser. Thank you.

[@arnolddumm]

Schön wieder ein Video von dir zu sehen

[@Rabom]

Oh danke. Mehr sind in Planung. Diesmal zwar "nur" eine Vorstellung. Aber vielleicht auch inspirierend.

[@arnolddumm]

@@Rabom sind sie immer. Ich habe mir nach deinem Video eine Ahle selber gemacht. Jetzt arbeite ich gerade am Nachfolger mit verstaufächern (Löcher) um die Nadeln und Ahlen immer dabei zu haben

[@ianusdivus]

Hallo. Danke für das tolle Video. Funktioniert das Gerät einwandfrei mit deutscher Netzspannung ?

[@Rabom]

Klar 230 V mit passendem Kaltgerätesrecker.

[@bazlur-Vancouver]

I have 2 questions: at what temperatures(tip temperature) you can get perfect crease? 2nd, If the tip size is F-2 and FN-2, what is the real distance it creased? 2mm or less from the end? for this brand. Thanks

[@Rabom]

The temperature depends in fact on the leather. Always make a test on a piece of scrap. For the distances...please contact the seller of this product.

[@beaver_squeezer4226]

@Bazlur Rahman He explained everything perfectly in this video. Buy the machine and read the instructions. Maybe you could figure it out on your own.

[@glacialimpala]

I have to wonder why such simple tech like this has to have extra parts in the original, French version. They have some sort of fuse between the handle and the tip

[@bazlur-Vancouver]

so how much total cost you what has been seen in your video? I'm looking for one, but the regad is very expensive. Chinese made are very difficult to guess good or bad.

[@Rabom]

The Set shown is about 250€. I got no technical problems with this one.

[@bazlur-Vancouver]

@@Rabom Thanks.

[@dreamwarriors979]

Hab ich mir jetzt auch bestellt!!!

[@Rabom]

Viel Spaß damit

[@pequodexpress]

Have you encountered any problems by not having the temperature monitored at the tips?

[@Rabom]

No. I really don't have any problems. But I must say that I always make Tests. No leather is the same. If leather a works fine with e.g. 200°C than a similar leather needs maybe a few degrees up or down. So I always try out about the temperature. But the tips are fine. They always do their job.

[@Arch1301]

didn’t get the thing,you can make branding stamp with this tool too?

[@Rabom]

Mainly it is for creasing edges. But when you own a logo stamp you can choose the right temperature and stamp the logo easily.

[@Arch1301]

_ Rabom_ nice, thank you!

[@birgiteisinger-wolf2908]

tolles Video - ich habe mir den creaser gekauft, weiss nun aber so gar nicht, welche Temperatur ich wofür einstellen muss. Kannst du mir da bitte mal etwas Hilfestellung bieten ?

[@Rabom]

Gerne doch. Zuerst mal ist jedes Leder anders. Deshalb mache ich es immer so, dass Ich es ausprobiere. An einem Reststück langsam herantasten. Anders ist es nicht machbar. So braucht man für Blankleder höhere Temperaturen als für chromgegerbtes Leder. Mach dir dann am besten Notizen.

[@fhng]

Question, is the connecting end on the handle a M5 or M8 thread?

[@Rabom]

M5

[@fhng]

@@Rabom so, it is not possible to use M8 iron tip?

[@Rabom]

@@fhng I'm not the manufacturer. But maybe it's possible to use an adapter. Please ask the manufacturer. He's a nice guy and will answer all your questions

[@Dahna_]

can someone explain why you can't just use a soldering iron and get some tips for it? what are the downsides of doing that?

[@Rabom]

Because the temperature cannot be kept stable. And this is important for leather not to burn. Nothing is more frustrating than ruining the project with one of the last steps.

[@bazlur-Vancouver]

I bought it a month plus ago and wasting a hundred plus $ buying all kinds of bullshit creasers. actually this one great and of good quality even than your youtube video picture. I believed your review after watching it.

[@Kikuyumoja]

Diese Videos sind sogar auf Englisch sehr gut. Was ist mit der URL (rabomslederkiste.de), irgendwie gibt es nur das Blog bei Blogspot?

[@Rabom]

Danke...was meinst du genau mit der URL?

[@Kikuyumoja]

@@Rabom in einigen Videos wird eine URL beworben, die nicht erreichbar ist. Daher die Frage.

[@Rabom]

Shit. Weißt du gerade ein Beispiel? Übrigens ...danke für den Hinweis.🙂

[@Kikuyumoja]

@@Rabom ja, hier zB kzbin.info/www/bejne/bWjHq42VjrypZqM ich meine aber auch nur die rambomslederkiste.de URL

[@youzenashandcraft6617]

Кроме ужасного английского ничего и нет