I personally think you should’ve taken the original screw and made a longer one just like it. Anyone with a lathe and a few minutes of time could make you one with the right threads and everything.
@miro61382 ай бұрын
Certainly not anyone, this screw is so small you can barely see the slot for the screwdriver with your eyes. It would be impossible to single point cut, and good luck finding machinist with die for M0.5 thread or whatever that is.
@megamega3625 ай бұрын
Rubber ball opens all this style back in my experience.
@aleksandrorlov15153 ай бұрын
It is a pleasure to watch. Good video.
@valengreymoon56239 ай бұрын
I had this same issue with mine. Adjuster al the way in, and still running fast. I found that I had to de-magnetize it, but still no change in rate. So I removed the swan neck, and adjusted it the old way. now it runs dead on to +1 a day.
@rafaelfranciulli9 ай бұрын
You simple have to put the regulator at center, regulate with the lever, and then make the fine adjustment with the screw.
@thejohnson92046 ай бұрын
Great video mate. I love the, oops i don't have a tool, so i will just make one moment.
@TomIreson6 ай бұрын
Cheers. All I ever seem to make is more tools, though.
@fxhood21147 ай бұрын
very nice job - very inspiring 😊
@jollyrogers766611 ай бұрын
Very interesting. Good job
@tommusikauswahl10668 ай бұрын
Werent you able to open it with the Rubberball Bergeon 8008?
@simartnullnet6 ай бұрын
I was thinking the same thing
@jackburtonstwin5 ай бұрын
I opted to avoid the swan neck fine regulator on this movement as it is really not a movement that benefits from such a fine adjustment mechanism given its general build quality and finishing. working with the regulator pin positions is made easier without the faff of the swan neck and will achieve a reasonable outcome on my timegrapher
@CorkBouldering2 ай бұрын
It looks like paying extra money for swan neck version is waste.😅
@williamvun11 ай бұрын
Cool
@roadgent79214 ай бұрын
Very fiddly and maxed out from the factory to boot! No wonder people buy so many quartz. 😮
@aleksandrorlov15153 ай бұрын
Almost all my quartz watches are stopped. Batteries has died, but mechanical watches i can pull out any time and ready to wear. The one kinetic seiko is still alive 😊
@roadgent79213 ай бұрын
@aleksandrorlov1515 It is true that batteries die of course. It's not super difficult to replace them, plenty of vids on KZbin. All my solar quartz watches are still working fine, some after 15 years. 😀
@SQueme4 ай бұрын
♻ still searching & byuing them in NON-WORKING conditon, for parts or repair : i'm a beginner on chronographs ♻
@MichaelWilliams-mo1vv6 ай бұрын
This unwittingly illustrates the problem with these watches/brands. You shouldn't have had to modify the adjusting screw if the thing had been made properly in the first place. I had a homage watch with this movement and the winding mechanism broke after 6 months. These watches get rave reviews but there are q c issues.
@TomIreson6 ай бұрын
It very knowingly illustrates that these movements are not to be regarded as quality movements in any respect. With new ST1901 movements available at around 100 $/£/€ you're going to get the quality and quality control that you've paid for. Any mechanical chronograph at less the 1k $/£/€ would be 'workhorse' quality at best. Seagull et al are nothing more that novelties with curiosity value to play about with.
@SQueme5 ай бұрын
♻ sell it for parts or repair : parts are hard to find on ST19 ... so i'm searching for such non working ones (🇫🇷 ) repair of the winding mechanism (click spring) is also a common issue on old ST19 i had (2 by now had this issue)
@bricesuire50728 күн бұрын
I would’ve kept it cleaner.
@neilpiper98898 ай бұрын
15 seconds a day is fine for a mechanical movement. If you want better accuracy .
@philippkaltenleitner78618 ай бұрын
Mine is Running 8 minutes fast since I accidentally dropped it😢15 seconds would be Dream
@TomIreson8 ай бұрын
Probably cheaper to buy another one than have a watchmaker repair it, but there are hundreds of videos on very low cost time graphers and watch regulation. You may have found a new hobby. Or, just buy watches that are worth more than your car. You don't drop them EVER. Ask me how I know.
@SQueme5 ай бұрын
♻ sell it for parts or repair : parts are hard to find on ST19 ... so i'm searching for such non working ones (🇫🇷 ) bend pivot ? hair spring tangled ?