Leatherman Skeletool's MAJOR FLAW & How To Fix It!

[@blacksquirrel4008]

I snapped my pliers, too. They really can’t be twisted. Leatherman sent me a new Cx right away. They even recommended I take my old bits out before mailing it in.

[@GanderFlight]

Their warranty is spot on.

[@michaelmartinez9602]

Ooh that’s bs that these pliers can’t hold up to even take out a cotter pin and to think I just bought this stupid tool

[@wvhunter1968]

I love the minamalist and high quality blade design of the skeletool. In my opinion, for my needs, best one out there.

[@globetrotter7778]

So do I, I love that they still offer a multi tool that focuses on the essentials rather than on cramming in all the imaginable bells in whistles.

[@GanderFlight]

agreed - still carry it everyday

[@brucey39]

I have carried the CX for quite a few years now . I work as a handyman and use it daily . Don't use the bit to open paint cans .Use the other end of the tool at the tip where the string hole is opposite the carabiner . It's works amazingly well .

[@GanderFlight]

That is a FANTASTIC idea!

[@markkitaoka8783]

Hi Kiwi, I just purchased an add-on item called "Leatherman Skeletool Hammer/Jammer" I'd post a link here, but YT doesn't allow that. Not only does it have a small pry bar, but a hammer and a 1/4" slot for bits. Gander Flight, thank you for your suggestion, I've taken it up. I did replace the secondary bit in the handle with a Torx bit since I find I often need one. It's such a handy EDC tool.

[@GanderFlight]

@@markkitaoka8783 Thanks for sharing that Mark - I hadn't heard of the the hammer jammer -- looks like a really cool addon!!!

[@DanoSlingz]

I didn't know Leatherman had these flat and Phillips bits together like that. Thanks! I have carried my CX for 4 years now and have never had any problems. Thanks for the video! 😎

[@GanderFlight]

The combo bits are fantastic -look them up! Cheers!

[@EvanDunville]

Absolutely love the Skeletool CX. I also use the combo bit in the driver. As a Canadian i prefer to use the #1 and #2 Robinson (square) in the handle because a lot of the screws i run into are Robinsons.

[@GanderFlight]

That would be handy for my RV as most of those are square heads as well.

[@NaturalBornGriller]

Yeah bud I want a robertson bit as well. I kind of want a robertson #2 + flat #2 bit

[@smartassmart]

ordered the same bit pack but for a different reason… up here in canuck land, robertson (square) heads are the most common. i already had the leatherman bit kit (the big one) so i had a bit with the #1 and #2 robertson (square) so now with only two bits in the skeletool i have a flathead, #1 - #2 philips and the #1, #2 square… awesome tool, never leaves my side.

[@TheSimplecanadian]

I plan on doing the same thing

[@Bactaman]

Forget the flat head driver for paint cans and use the carabiner butt end instead. Works amazingly well.

[@GanderFlight]

You're the second person to recommend that - such a great idea!

[@christopheramerally3194]

This was my only issue with my skeletool as well, don’t know why I didn’t think of this, thanks.

[@GanderFlight]

Absolutely!

[@JamesWilliams-he4lb]

Thanks for the tip. I have a leatherman bit kit and that doesn't even include the flat/phillips combo, so I didn't even know those were made.

[@GanderFlight]

Glad I could help!

[@YouBeToobing]

I bought several of the Phillips/Straight combo bits to have for spares. I even ordered the MuT but set to have the long screwdriver bit. Works great.

[@GanderFlight]

Great tip! Where do you keep the long screwdriver bits when they're not being used?

[@roberttaylor8488]

Thank you I lost my Leatherman Freestyle CX and have been looking for a replacement. I thought the bit was affixed and wouldn’t buy it become of it. So now I’ll be looking for the Skeletool

[@GanderFlight]

I really enjoy it. Lost one at the beach and ordered the same thing to replace it!

[@roberttaylor8488]

@@GanderFlight I bought the Leatherman Skeletool CX it's nice but, it's not going to replace my lost Freestyle CX. I've got mixed feelings about the caribeaner to the point I was going to actually cut it off and shape it more like the Freestyle CX. I'm not use to it yet. I'm even thinking of just buying a folding knife and leave the Skeletool in the box.

[@gtd360]

I have the whole bit set thinking I was going to carry it around in the case. Im going to have to find the case now and see if there's a combo in it.

[@markfcoble]

On belt loop, pockets free! Love it here at high mountain desert plateau hideout NM.

[@GanderFlight]

Its a nice minimal unit - I use it everyday!

[@DerkaDietrich93]

I had one in my locker when I used to be a volunteer firefighter that was provided by the fire department. Didn’t get to use it much, but it was a pretty sweet tool.

[@GanderFlight]

👍

[@jamesyee4143]

Hi, Thanks for that FYI on the 🔪!

[@GanderFlight]

No problem 👍

[@dhruvpatki2169]

Hella underrated channel mate

[@GanderFlight]

Thanks Dhruv - I appreciate the kind words. I hope that the videos provide value for you. Thanks for watching :)

[@ScorpionRegent]

Gander Flight - Good video, if you use it all the time it is a truly worth hack. The Skeletoool is mighty useful, in spite of its proprietary bits. I have a Gerber Crossdriver that can do all that and more, but it is awfully bulky and massive.

[@Gunny672]

I wish it had a saw without having to get the Signal. Great video and mod recommendation.

[@GanderFlight]

Thanks!

[@jamesyee4143]

Thanks for that FYI on that, I like that one screw bit .😊

[@GanderFlight]

Me too - use it everyday

[@cj1000]

Wow I need these! Thank you, this is awesome and makes my favorite tool completely perfect.

[@GanderFlight]

Agreed!

[@ItsaPlanetKiller]

Rediscovering my Skeletool, so many of these vids are popping up. Great idea about the dual sided bit. But dang, removing a cotter pin broke the pliers? That's some cotter pin! Anyway, good video.

[@GanderFlight]

I was surprised too! Thanks for watching

[@Motorcyclewindtherapy]

I like the suggestion. I'll add those bits to my Skeletool soon I'd bet.

[@GanderFlight]

It really makes all the difference!

[@daviddriver9388]

Thanks, ordering replacement bits now.

[@GanderFlight]

Enjoy! Makes it so much more usable on a day to day basis.

[@merrette]

Just ordered a set of replacement bits, thanks!!!

[@GanderFlight]

I think you'll like them

[@thebundok]

12,000 subscribers! Way to go Josh! :D

[@GanderFlight]

Yahoo!!! Thanks for supporting me from the single digits!! 🥳

[@blueeyeswhitedragon9839]

I added two Robertson bits to my Skeletool. In Canada we are more likely to come across the Robertson screwdriver bit than the Phillips, and whenever l do find the Phillips screws, l usually replace them immediately with Robertson screws...much more reliable.

[@GanderFlight]

Love the square bits!

[@snesleywipessqueegeeservices]

Agree, excellent point old chap! 👏

[@GanderFlight]

🙌

[@j.m.youngquist419]

Very valid observation. Nice review

[@GanderFlight]

Glad you enjoyed it, thanks for watching!

[@nbk2184]

Was considering a skeletool. Now plan to order bit set at same time to avoid extra shipping

[@GanderFlight]

I think you'll be happy with it :)

[@JFPriest]

Yep. Just happened to me. First time using the pliers. Found this video. Thanks

[@GanderFlight]

Bummer - it'll take some time but they'll get you sorted out.

[@toastae21]

Great video thanks, I’ve just got the skeletool as a present, I’ve had 2 wingman in the past and loved them. One thing I noticed straight away with the skeletool is the pliers head doesn’t naturally stay open like the wingman did. is this something that changes over time with use or is it closed and you need to awkwardly handle it to open and close it when your are using it? Big deciding factor for if I’m going to return for another wingman or not as I don’t have the time or the hands when I’m 10 foot up a ladder trying to loosen a stubborn nut on a lighting fixture .

[@GanderFlight]

The skeletool is not spring loaded.

[@toastae21]

Honestly not seeing the advantages over sidekick or wingman, less features, similar weight, 40 quid more expensive, pilers doesn't stay open. Looks cool but thats about it

[@DanielRodriguez-fv5os]

Just ordered the skeletool and added the bits to my order

[@GanderFlight]

I think you'll like them

[@Lonewolfpack]

You can also buy a bid kit from Leatherman and a bit extender

[@hervevazeilles3790]

You can change the bits in a bit driver? Thx a lot for the info I would have never think about it myself.

[@GanderFlight]

Its not about knowing you can change bits - its about selecting the combo bit that should come with the unit from the factory. Have a nice day Herve! Thanks for the comment

[@KernowEDC]

@@GanderFlight yeah I think he missed the point there 😂

[@__-pl3jg]

A lot of KZbinrs make the mistake of moving their hands at normal speed during videos. The human eye can catch small details in real life they cant see in a video. When you're holding something in front of the camera move your hands VERY slowly like you're underwater. Open/close multi tools SLOWLY...Preferably on a table top instead of floating in midair.

[@precisionmatchtimer]

anyplace to get a replacement knife blade? I have the combo straight/serrated and it has chipped and broken. I'd love to replace it with just a straight blade.

[@GanderFlight]

Best bet is to contact leatherman directly

[@kit888]

I've read other reviews of the Skeletool pliers breaking. Sounds like a common problem, enough reason to get something else.

[@GanderFlight]

👍

[@flipside1974]

Cool video. Great suggestion!

[@GanderFlight]

It really makes the tool sooo much better to use on a day to day basis.

[@vwestlife]

Make that " *Its* Problem "... no apostrophe!

[@GanderFlight]

good catch! Thanks

[@antoinebugleboy6864]

If you live near Portland, you can just go to the Leatherman store and get a warranty replacement in person.

[@GanderFlight]

Good to know!

[@EddieMorton-n7g]

very informative review. thank you

[@GanderFlight]

Glad it was helpful!

[@robrot5460]

Leatherman’s warranty is very hard to beat!

[@GanderFlight]

Its a good warranty for sure!

[@andrewburton4584]

Good vid, thanks for the info. I am going buy the philips/flat bit right now!

[@GanderFlight]

Thank you! With those combo bits it really is an ideal EDC tool.

[@parker8691]

How long have you been carrying the skeletool?

[@GanderFlight]

Almost a year and a half at this point.

[@jerryprice5484]

I love the Skeltool as well, however I find the screwdriver bit tends to dig into my palm so at time I'm forced to remove it when I'm using the tool

[@GanderFlight]

I can definitely see that issue.

[@DanoSlingz]

I agree. My hands are big so the bit does hurt when I use the pliers. 👍

[@smy76]

Awesome tip. Thank you.

[@GanderFlight]

You bet Rob!

[@michaelk487]

I had an old Leatherman Marlboro Edition you want to go out again sent it back it was damaged they sent me a brand-new rebar I think they went beyond their warranty on that one

[@GanderFlight]

Awesome! Their warranty is great.

[@viewitnow3539]

The curve handle (that only fits your hand 1 direction) and that silly/useless carabiner keeps this off my edc rotation.

[@GanderFlight]

Valid critiques

[@smy76]

I think the RX has a Philips/flat combo in the storage section.

[@GanderFlight]

Based on the photos on Leatherman's website I'd say you're correct. For an EDC knife I don't care for serrated blades though and its easier to switch out the bits than it is to swap a blade.

[@IamACanadian47]

Cool video, up here in northern Canada at the hardware store I work at we have sold roughly half a dozen Skeletool tools and each one has had the dual bits in the package, so your bit problem seems odd to me. P.S. in the old days long before Covid we used to get the wave, surge and Skeletool with a loose ROBERTSON (or square) number 2 and 3 double sided bit loose in the box (I called leatherman and tried to order more and they said they didn’t know what I was talking about) a shame as square bits are super popular up here eh 🇨🇦.

[@GanderFlight]

Have these sales been recently? Maybe they updated the packages? Hopefully? Very interesting that you got a few loose Robertson bits - that would be a very unique shape for a skeletool bit!

[@IamACanadian47]

@@GanderFlight when Leatherman released the free series with the grey coloured sheaths was when we STOPPED getting the spare double sided bit loose in the package with each tool, a real shame since at my hardware store almost every single screw we sell has a Robertson (or square) head and since no one at Leatherman customer support appears to know how they were made (and therefore I can’t order them as I was told they “don’t exist in our product catalog”) so I hold dearly onto the 3 I have as I use them many times daily to help customers and keep them preloaded in my wave or surge as we hardly ever use Phillips up here. I received the bits when I bought my regular skeletool, wave and surge over a period of roughly 5 years but like I said, when the grey sheaths and new Leatherman logo and packaging released, well that was the end unfortunately. Very long winded but I thought you should know.

[@IamACanadian47]

P.S. I just noticed your comment about unusual shape, if you look at a standard 24 piece (I believe) bit set you’ll notice one of the bits is a square number 1 and 2 bit (known as a piece of the Canadian bit set) but up here we use the number 2 and 3 and rarely the number 1 bit driver, so that is why the rare 2 and 3 bit is so useful eh.

[@GanderFlight]

Not unusual shape as in the Robertson bit- but unusual as in the Robertson at the end of the flat bit shape required to be used in the skeletool

[@IamACanadian47]

@@GanderFlight just like all of the other Leatherman bits appear to be “flat” it’s the same for this one except their shape was a very small square to begin with so the profile is as flat as your American Philips bits. As long as you don’t put a ton of torque on them I think it’s amazing you can have 24 bits in such a small package (I keep my bit set in the back of my sheath) and I have used at least half of the different bits to solve a variety of problems at the hardware store I work at.

[@spitfire690]

I snapped the knife on mine. I really think they should beef up the knife because it snapped where the giant thumb hole is. A knife has no business being that thin like it is in that spot, and having it thicker wouldn't add much weight. It was replaced under warranty no problem. They must have really cheaped out if the pliers are snapping though...

[@GanderFlight]

Haven't had any issues with the warranty replacement since

[@tfwoodcraft]

Seems like a great solution! pretty much everything is a #2 Philips so that would be the best one to have on there, then a flat head opposite that would be way more useful than a different Philips. Put the smaller philips in the handle for those rare occasions. I like where your heads at!

[@GanderFlight]

Thanks! Yeah it works out really well with the dual bits - actually haven't used the second bit since I put it in a few years ago, the single combo bit does it all!

[@ketrickdilworth9612]

I did the exact same thing as soon as I got mine. No reason to have to dig a bit out of the side.

[@GanderFlight]

Makes it 100% better

[@frankievassallo552]

Thank you for the info

[@GanderFlight]

Any time!

[@martinthrone7012]

You didn't answer the question how? do you re sharpen the serated blade on the regular skeletool not the skeletool cx

[@GanderFlight]

That conundrum my friend, is precisely why I choose the version with a straight blade :)

[@TheBird..]

Leatherman multitools are the only multitools I’ve enjoyed using

[@GanderFlight]

👍

[@whatarefriends4]

Can’t believe they didn’t think of that

[@GanderFlight]

I'm sure there was some reason they went the way they did - I just thing this option is more universal.

[@lousquitieri4234]

Thanks!

[@danw6640]

Great idea! Thank you for the info, will be EDCing one of these very soon :D

[@GanderFlight]

Awesome! I enjoy the Skeletool very much.

[@deejaywon]

Thank you!

[@GanderFlight]

You're welcome!

[@harrydaniels2788]

The Skeletool pliers are made for small jobs. It's not going to handle jobs like the Surge or Wave will do. I find that people break the pliers on things It's not made for. That's not the tools fault It's the person's fault.

[@GanderFlight]

Pulling a cotter pin is asking too much…?

[@harrydaniels2788]

@Gander Flight - Guess it depends on how much force you put on it. Doing that never broke my Wave .

[@larryvansullen3935]

Very weak pliers, especially when twisting. Thank God for the great warrenty

[@harrydaniels2788]

@@larryvansullen3935- They will never replace dedicated pliers.. That's why I said they are good for small jobs.

[@bigrig55555]

I would love to take my Skeletool when traveling but because of the knife it wouldn't get through TSA obviously. Does anybody have any modifications to get it through TSA? I suppose I could just remove the blade altogether but a scissors or something else in its place would be great. Let me know what you all think. TY

[@GanderFlight]

Probably best to get something that is designed to fit that use case scenario

[@nonegeo]

Good idea.

[@GanderFlight]

Really makes it significantly more usable

[@bill_ruppert]

Thanks for the great tip. Pun unintended! 😂

[@GanderFlight]

hahahah You bet!

[@KernowEDC]

This is great! Thank you :)

[@GanderFlight]

Absolutely!

[@neonpaintsplash]

I wish Leatherman made a bit that was a #2 Phillips and a 1/4in flat combo that’d be the main bit I’d add to all my Leathermans.

[@GanderFlight]

Agreed

[@GanderFlight]

⭐⭐ *Examples of Products Used In This Video* ⭐⭐⠀ 🔷 Leatherman Skeletool: amzn.to/3ITuGP4 🔷 Leatherman Replacement Bits Phillips & Flat: www.leatherman.com/1-2-phillips-3-16-flat-screwdriver-bits-624.html 🔷 Leatherman Replacement Bits eBay: www.ebay.com/itm/175135940546?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_Qdvu1nHSrS&sssrc=2047675&ssuid=Y5nD8VtSRDC&widget_ver=artemis&media=COPY

[@ronfry5851]

Yes I do you the man

[@GanderFlight]

Enjoy!!

[@allemander]

You should know about the typo in your video title. You used the word it’s instead of its. The contraction (it’s) is short for “it is” and “it has”. The word you need is ITS with no apostrophe.

[@GanderFlight]

Good catch

[@ghostrunner2138]

if this is the biggest complaint I'm gonna go ahead and buy one!

[@GanderFlight]

I carry it everyday and haven’t been disappointed 🎉

[@allofmybirds7525]

This is not what I would personally call a "major flaw"... nonetheless great video, cheers

[@GanderFlight]

Fair enough, thanks for watching and taking the time to comment!

[@Sparkyspage]

Why did they discontinue the carbon one? I want the lightweight. Its kinda chunky

[@GanderFlight]

Not sure.

[@hndrwn]

The problem is the bit in 1:36. Thank me later. What a long intro... 🙁

[@GanderFlight]

Have a good day!

[@dermotryan9724]

I'm on my third one and it's my right hand man but the semi serrated blade was much better than this new flat one

[@GanderFlight]

Ah see I love the CX BECAUSE it has a straight blade ;)

[@michaelk487]

Cool

[@GanderFlight]

👍

[@KiwiPokerPlayer]

I really wish Leatherman would learn how pocket clips work. Why do they keep putting them upside down? I know on some models you can relocate it, but I daily a Wingman and that clip can't be relocated, only removed.

[@GanderFlight]

Dunno - the pocket clip on the skeletool is the correct orientation for how I like to carry.

[@KiwiPokerPlayer]

@@GanderFlight the Wingman is fairly unique in the Leatherman lineup in that it has a one handed opening blade on the outside and the clip is upside down.

[@rodgerrain7033]

Just get the Super Tool. Philips/Straight are built in, no dropping bits.

[@GanderFlight]

To each their own :)

[@bobcolantonio5932]

Nice video I think I buy a skeletal

[@GanderFlight]

Enjoy!

[@johnfenske9339]

Love the Skeletool, use it a lot. This is going to sound dumb, but I really wish they could somehow incorporate a can opener. My job often places me in the office for lunch, so being frugal, I often eat out of cans. I keep a Swiss Army knife in the desk for just this reason, but it would be really nice if I could narrow my tool load down to just the Skeletool. Are you listening, Leatherman?

[@GanderFlight]

Highly doubt you'll get that change - doesn't seem to be a highly sought after tool.

[@vagabontat]

Use the flathead screwdriver to save your blade from prying. You're only going back $60 + delivery and tax for the replacement bits if you chip it.

[@GanderFlight]

Someone else pointed out using the metal part near the carabiner on paint cans - I tried it and it fits perfectly!

[@insanogeddon]

The "Carbide Glass Breaker Bit" pairs great with your bit of choice (Tungsten Carbide Glass Breaking tip / 1/4" Screwdriver) just wish the plier tips together formed a 1/4" hex or from other comments a robertson #2 might be best in North America. A Gerber Suspension NXT gives it healthy competition sub-7oz, pocket clip, sprung pliers, more tools all locking and outside opening - complete for FAR less $$$.

[@GanderFlight]

The Gerber Suspension NXT has too many tooks - thats why I love the skeletool - just the ones I need.

[@johnrhodes870]

My NXT is still very hard to close locked tools

[@ryennino5470]

why not just buy the bit kit? comes with like 30 bits and if you don’t want to carry them all swap the one from the skeletool with ones you’d rather carry

[@GanderFlight]

another great option!

[@chuckhelms5248]

Clearly you have never had your hand pinched while in the pliers mode. I was hoping you had a fix for that :)

[@GanderFlight]

Keep your fingers out of the pinch zone... 🙃

[@insanogeddon]

Blade side AWAY from palm and no Mr Pinchy! Something the skelly has the wave/surge beat on where both sides have outside opening no-go pinch zones.

[@hole1623]

Same exact thing happened with me I was fiddling with my zero turn and I had my skeletool I need pliers so I used it and snapped the pliers same was as you 😂😂

[@GanderFlight]

Major bummer right? Were you able to get it replaced under warranty?>

[@hole1623]

@@GanderFlight yeah I shipped it out hopefully I'll get it back soon

[@eddiewalker7252]

...I promise to come back for another gander, just practice a lot and study the art that is youTube....but don't copy...do this one over it's been a year I guess lessons learned and all that, there's hope for all.

[@GanderFlight]

I'm sorry - I'm not quite sure what you're trying to tell me here - can you rephrase it please?

[@jodyguilbeaux8225]

the tool looks like a makeshift on the go tool, not made for big jobs. i just got one and when the time comes, i will try it.

[@GanderFlight]

I enjoy it and use it quite a bit

[@simonsears5925]

Agreed

[@GanderFlight]

👍🏻

[@adeby]

I broke today in exactly the same part. The design of the pliers is bad.

[@alexandernanov3970]

This is basically a pliers with some embellishments. If the pliers break so often, it means the tool is a waste of money.

[@GanderFlight]

👍

[@Velvet-Sunshine.]

I have the skeletool, and I know about the bits that are available and I have a few replacements, as for the warranty I had to use it on a different tool, which was shipped to me defective, never used, brand new but defective. Well the return process was difficult, I didn't like leatherman's request of proof requiring photographs or a video explaining my problem. At the time producing a video was not something I could do. So I sent them a letter and photographs, plus receipts. This was also an engraved item which I paid for under Leatherman's additional charges. Leatherman did not want to give me a refund or replace it, so they fought the whole thing. Their reason was that there is no refund or replacement for an engraved item even though it came defective upon shipping. They simply wouldn't do it, that is until I told them, that I am a collector of multi-tool and that I have a showcase which I sent them a picture of that has 20 of their products in my showcase, all of them brand new. And I threatened that if they didn't honor their warranty, I not only would never do business with them, but everybody I bring over to see my showcase and talk about multi-tools the subject of Leatherman's refusing to honor their warranty will undoubtedly come up. Due to this threat, leatherman replaced and engraved the tool, but of course I had to send back the defective multi tool so that they could evaluate my claim that it was their fault not mine, but no apology, just silence. All of this took a lot of time and patience. I nearly gave up more than once. That's my story, and it's 100% true, so don't trust leatherman to replace or repair your tool, especially if it's been engraved. Thanks for listening. Interesting video.

[@GanderFlight]

Sorry to hear you had a sour experience. I don't think its unreasonable for them to require photos or videos of defects before processing warranty claims.

[@Velvet-Sunshine.]

@@GanderFlight In response, I would say since Leatherman would be receiving the tool in the process of the return, they need not put their customers through such an ordeal to provide prove with video evidence of the defect, because they could see it themselves when the Tool arrives. And I did include a letter describing my complaint. Also, I recently became part of the KZbin community and have a Channel of my own so you may not see me by my formal username. If you want to visit the channel it's, (The Best Channel you ever Knew) I even set it up so that you could go there using the channel name, (The Cure to Mental Illness). Enjoy.

[@markthompson9684]

Is it spring loaded……………..

[@GanderFlight]

No it is not.

[@RR31982]

Should have one bit only Philips and flat

[@GanderFlight]

Yupp - and thats what we solve in this video.

[@KurniadiPrathomo-sp5zd]

CX+ for scissors!

[@GanderFlight]

??? Is "CX+" a new model that has scissors instead of pliers? I'm not seeing that on Leatherman's website

[@KurniadiPrathomo-sp5zd]

@@GanderFlight no, it's just my wish

[@GanderFlight]

@@KurniadiPrathomo-sp5zd ahh - gotcha!

[@erdenebilegpurevsuren3277]

I use my lips to hold the bit when i switch.

[@GanderFlight]

That'll do - but this is much easier and quicker :)

[@gamingSlasher]

Should have been like that by default. Hopefully Leatherman notice this video.

[@GanderFlight]

Would be cool if it was!

[@gort3969]

Most people will never use anything but the knife and bottle opener

[@GanderFlight]

eh... I think the bit driver gets used a ton

[@happyknife8785]

This is exactly what I'm going to do with my Skeletool

[@GanderFlight]

It definitely helps!

[@MasterYoist]

I own five Leatherman multitools. The skeletool is by far the worst one. You are right about the lack of being user friendly with regards to changing screwdriver bits. I demonstrated this as well in my review video. I showed the tool being used in various situations and went over many of the pros and cons. I got mine for $40.00 off the shelf. And, I feel this is overpriced for the quality and functionality of this tool. Now, the local stores have them for $85.00. SMH

[@GanderFlight]

Whats your favorite?

[@MasterYoist]

​@@GanderFlightSorry for the late reply as I just saw this. For everyday use: Rev Heavier Duty; Surge I keep a Micra and Style PS in my altoids tin in a leather belt pouch. Take care.

[@mdyzward8553]

Been doing this mod for like 7 years lol

[@GanderFlight]

It really should come this way...

[@mdyzward8553]

@@GanderFlight IKR!!???

[@ThumperThumper-uo9oo]

Yes of course that's kind of a no-brainer answer to that question they should definitely come with the Phillips and Flathead replacements. Just add saved by dollars to the price and then you get all three of these items in your kit and there's no having to wait or making a special order everything you have is in pocket and isn't that what it's supposed to be for? Good customer service and thinking about what a customer's needs are and providing those needs without charging the customer extra money really in the long run is the smartest thing to do for a business because if a product works and someone is happy with that product they are more than willing to say so and good publicity goes a long way the same with bad publicity. If a customer has a good review and tells his buddy about the excellent performance the quality and craftsmanship of a product plus the customer service and the forethought that to add certain little things such as the extra bits really goes a long way for the customer and not only will we say so to others about it but we are much more likely to maybe even buy another product just like this just to have as backup or in our backpack or whatever bag

[@GanderFlight]

👍

[@insanogeddon]

Sadly long has LM gotten more publicity and cash issuing CLOSE TO PERFECT tools.

[@d.Cog420]

this must be the most first world problem on KZbin

[@GanderFlight]

hey thanks for the engagement! Your over dramatization is appreciated in that respect - thanks for watching

[@d.Cog420]

@@GanderFlight someone’s over dramatisation…