All of my recommended lists are here: www.amazon.com/shop/leathertoolz
@uxb11124 жыл бұрын
I was taught to mark the corners first with a round hole and then stitch off from that and then when they meet, mark the space so it looks right.
@sopatisserie12823 жыл бұрын
My goodness, I don't think one can find this information elsewhere than here! Merci!
@kelleyl82994 жыл бұрын
Thank you so much for this!! I’m new to leather and I’ve been going crazy trying to modify my pattern to fit my stitching and making a bunch of prototypes without it working.
@leathertoolz4 жыл бұрын
Glad it was helpful! ; )
@kboleather4 жыл бұрын
This is incredibly helpful for new crafters, Jun!
@leathertoolz4 жыл бұрын
Glad it's helpful Lynn!!!
@thejordanflynn4 жыл бұрын
Thank you for this! I havent quite got the money for multiple size irons that close (though will one day :)) but until then I try do something similar using a two tooth and ruler to hide a slightly larger/smaller stitch.
@INS19772 жыл бұрын
Calculation nightmare... Big problem to me... When i create patterns free stuff
@mikedegrazia4 жыл бұрын
Thanks for the advice i usually use a single stitch and eye ball the last hole, if i need more or less. I also use stitching hole plotting (pounce) wheels with the same stitch spacing to preview where all the stitches land before i use the pricking irons. This is a really different method id like to try... thanks
@leathertoolz4 жыл бұрын
That also works, only need to careful to put it in correct angle.
@mikedegrazia4 жыл бұрын
@@leathertoolz in the beginning i did make that mistake, i have tried my best to learn and videos like yours help immensely. Thanks again for your help!
@leathertoolz4 жыл бұрын
@@mikedegrazia I'm glad, Zenghost 13 ; )
@danielirvine74684 жыл бұрын
Please do a video to show how you use a pricking iron through multiple layer of leather. Tips for how to hit pricking iron straight
@leathertoolz4 жыл бұрын
kzbin.info/www/bejne/Zp3WoZ9va8drZqM
@adiazim50984 жыл бұрын
Thanks! Another excellent demonstration.
@leathertoolz4 жыл бұрын
Glad you liked it!
@galihwicaksono37034 жыл бұрын
How about using 1 tooth chisel or awl to adjust 2-3 holes somewhere in the middle or near the end holes?
@leathertoolz4 жыл бұрын
that would work too!
@theotherleft61132 жыл бұрын
What a neat trick.
@V3leathercraft3 жыл бұрын
Thanks. But availability of 4.5 or 3.5 in India is null 😥😥( i am using 4mm Japanese style)
@LC-lb9fq4 жыл бұрын
Good tips as always. I use Kevin Lee 3mm diamond irons and I was thinking of getting a very cheap 4-tooth 2.7 and/or 3.38mm stitching iron or round-dent, and using that to mark slightly longer or shorter stitches. Mark with that cheap tool and punch with my Kevin Lee 1-tooth. What do you think? At the moment I measure with my calipers to make 2 or 3 slightly longer or shorter stitches which works OK but harder to keep a straight line.
@leathertoolz4 жыл бұрын
That could work, marking for stitching only. you could use divider for spacing and make holes with good pricking iron as well. it would only effective in larger spacing like 5mm or 8mm. but it's great idea LC
@killernils4 жыл бұрын
Please show How with a hole punch iron!
@leathertoolz4 жыл бұрын
it would be the same technique, only need single hole punch with correct size.