Lec 12: Rittinger's, Kick's, Bond's Law, Workindex ExampleProblem :Mechanical Unit Operation Lecture

[@user-puratchitamilan]

What is souter mean diameter?

[@user-puratchitamilan]

What is the value of kick's constant, Ricktinger'S constant, Bond's constant

[@aviralomar3760]

correction 12:29 10 and 50 are raised to power of -4 not -1 and Wi=0.3166 am I correct?

[@Ashcoconut]

Sir in Bond's law isn't there a 2 multiplied with the K_B

[@Dr.surendra0845]

The value depends on units of diameter and power we use in our calculations.

[@utsavkhunt007]

made it easy

[@Dr.surendra0845]

Thank you

[@martingeorge4889]

Process modelling and Simulation lab experiments 1. Estimation of dew point and bubble point temperature of a hydrocarbon mixture 2. Simulation of flash drum 3. Design of ditillation column 4. Optimization of a flow sheet or process 5. Determination of temperature profiles for heat exchanger 6. Concentration profiles for reactor 7. Simulation of Jacketed CSTR 8. Simulation of process 9. Simulation of evaporator/ distillation column/ extraction process

[@Dr.surendra0845]

Dear Aspirant, we will try thank you

[@Dr.surendra0845]

Dear Aspirant, we will try Thank you

[@utsavkhunt007]

Thank you sir ❤

[@Dr.surendra0845]

Most welcome

[@nagaraj1005]

Sir, please make a videos on industry related practices, how to maintain volume & charge calculations

[@Dr.surendra0845]

Thank you mr. Nagaraj...I will definitely try ones I finish this lecture series made for btech students as a part of syllabus

[@nagaraj1005]

@@Dr.surendra0845 Thanks for your reply sir I have some doubts regarding the charging volume & calculations so eagerly waiting for your video 👍

[@Dr.surendra0845]

Hi Mr. Nagraj. I have very little idea about what you have asked for as it is not a part of B-Tech Syllabus. If you could share me some relevant information. I might read come up in future if time permits

[@martingeorge4889]

PROCESS DYNAMICS AND CONTROL LAB Experiments 1. I & II Order System Dynamics 2. Interacting & non interacting Systems 3. Flapper - Nozzle system 4. Control valve characteristics 5. Level control system 6. Flow control system 7. Pressure control system 8. Control of a thermal system 9. Design of control system for a given process 10. Simulation of a closed loop system 11. Demo Experiment using Aspen Software of a given process

[@Dr.surendra0845]

Dear Aspirant. We will try thank you

[@martingeorge4889]

Sir please upload process dynamics and control and process modelling and simulation lab experiments

[@Dr.surendra0845]

Thank u Martin. When I get a chance to teach the respective subjects, I will upload as we are very busy in most of things. In the next sem probable I will upload CRE II lectures

[@martingeorge4889]

Thank you sir.If Possible please do upload the lab experiments@@Dr.surendra0845