Lectric Xp E-Bike Freewheel Upgrade replacement Tutorial and differences

Electric Bike freewheel tutorial to change from a 7s 14-28 to a 7s Dnp 11-28 freewheel. This will show you step-by-step instructions on how to change your freewheel, please not it is not the same as a cassette! #electricbike #ridelectric #ebike
Purchase a Lectric Bike here lectricebikes.s...
My Lectric Xp Playlist here • Lectric XP E-Bike Test...
Follow me on Instagram / jmcintosh97
Affiliate Links Below To Bike accessories I use and recommend.
Rockbros Rack bag amzn.to/2t6iYNv
Swept back Handlebars amzn.to/2HpmVnT
Blue thread locker amzn.to/2S1meDe
Bar end Mirror amzn.to/2S5qzoU
4 Bike Rack amzn.to/2No8DUT
2 Bike Rack amzn.to/2PVhT4S or new model amzn.to/37VZ741
Transportation Bike Cover XL Transportation Cover amzn.to/2UvyhtO
Cargo Net amzn.to/2IuWPAU
Kryptonite chain lock amzn.to/2AzUIqX
Cloud 9 seat I have amzn.to/2PX84mA
Cloud 9 seat like mine with Lycra Top amzn.to/3m3aDjP
Different options for suspension seat posts Below.
Deying Zoom suspension seat post (make sure to select 31.6) amzn.to/36QxH0l
Deying Zoom Suspension seat post Red (make sure to select 31.6 mm) amzn.to/36NOrp4
DJC Zoom Suspension seat post Select Color and (make sure to select 31.6) amzn.to/36QgeF9
DJC Suspension Seat post (Lectric Style Mount make sure to select 31.6) amzn.to/2Od7Fhj
Blue Reflective rim strips (Select 20” Bicycle/Ebikes) amzn.to/34LYYiC
Baby Blue Reflective Rim Strips (Select 20” Bicycle/Ebikes) amzn.to/30VPDU5
20x4 Tube amzn.to/2QtIrbQ
Reflective Tape amzn.to/2Qec7cM
Shark Cycle Torch amzn.to/2Ql2TLT
Lixada Rack bag amzn.to/367ZIOF
B-Soul frame Bag amzn.to/2U7oSId
Solar USB Battery Bank amzn.to/2XyLyUD
Alarm Disc Lock amzn.to/2JBlzbe
Handlebar extender amzn.to/35X8Llp
Phone Mount amzn.to/2QiuVb4
Other Phone Mount amzn.to/3fEvZRj
Bottle cage holder amzn.to/2PXL7zB
Flashlight Holder amzn.to/2rCcIwT
Foam grips I have amzn.to/2DAHb4j
Or you could search all the different silicon grips here. amzn.to/3gVnP8F
Bell tool kit amzn.to/2PYzEQ0
Factory style Lectric type replacement pads (pick your compound)amzn.to/2WKg90Q
Zoom Hydraulic Brake upgrade amzn.to/3hrtDGM
Or search all amzn.to/2E2P5TS
HB-100 replacement pads amzn.to/3jtqOXf
Large Twist Tie amzn.to/3eEaBf3
Bike Stand I Have amzn.to/32Jlb1c
Other Bike repair stands amzn.to/2Lie0Xi
11-28 Freewheel amzn.to/3Kr8E7K
11-34 freewheel amzn.to/357ty5W
Freewheel removal tool amzn.to/2PC6LbJ
Allen wrench amzn.to/3cULjIB
Vibrelli V70 Sport Fat Tire E-Bike rack amzn.to/2CKIJYx
Equipment I used to make this video
GoPro Hero 7 Black amzn.to/35bxaUk
Canon EOS R6 amzn.to/306VwNV
Samsung 256gb micro sd card amzn.to/2RVSmby
Samsung 128gb micro sd card amzn.to/2SSb8Qy
Rode Videomicro amzn.to/2GEclWV
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission and it’s no extra cost for you! This helps support the channel and allows us to continue to make videos like this. Thank you for your support.

[@colomacountry]

Great tip on the spacer I'm not sure I would have caught that and been so pissed to have shitty shifting and take it all apart again. Saved me many hours of frustration!!!! Thank you!!

[@JeremiahMcintosh]

You’re welcome!

[@dsena2530]

Great video, very helpful. For any newbies, if you have never removed a rear wheel before, one thing I like to do is before I tighten anything, I give the wheel "a good spin" to make sure everything is lined up and no squealing; brakes or tires, etc.

[@dankasper3914]

I just want to say "thank you" for posting this video! It gave me the confidence to change my freewheel, and it has made a huge difference when going top speed on my XP 2.0. It is really well done and easy to follow. Great camera work under difficult circumstances. You are a good teacher. Cheers.

[@JeremiahMcintosh]

Thank You Dan. Glad you got the new freewheel installed!

[@omarromero6630]

I agree 100%

[@mandptruskier]

Thanks for this video. My problem was the opposite as I live in an area with very steep hills. I followed your instructions bit switched to a 14-34t Shimano freewheel, and it all went very well. The derailleur *just* misses the new 34 tooth, and it works great. Thanks again!

[@mt186]

I'm thinking about doing the the same thing. Was it a significant difference? Do you have a link for where you bought yours

[@JeremiahMcintosh]

There is a link to both in my video description. Just expand the description with the arrow next to the video title.

[@libertysmith6276]

Thanks for this video. It simplified my decision to try a 11-34 on my ebike. Also thanks to the guy that posted to your request for someone to verify the function ability of a 11-34. I am now subscribed and look forward to more videos. Thanks, Liberty

[@JeremiahMcintosh]

Thank you Liberty I appreciate that!

[@ccclaw13]

You should be able to adjust the derailleur so it catches and doesn't miss the 34 gear

[@jamesbomd3503]

When take the back WHEEL off remember to place a nickel or a coin or a washer will do between the brake pads AND DON'T PLAY WITH THE BRAKES UNTIL THE WHEEL IS BACK ON. Otherwise the pads will close and they are a nightmare to prize back open

[@SheffPurp]

I work for Citi Bike. I know this all too well. I'm an E-Bike mechanic 🤣

[@adventuretech3765]

I just ordered an XP 2.0 yesterday...I was going to get the 3.0...but circumstances wouldn't allow me to. One of the main reasons I had narrowed my choice to the 3.0 was chiefly due to the freewheel difference between the 2.0 and seeing you make the switch, I really appreciate the work you've done to let me know that I CAN do it myself if I want to make the change (which I probably will sooner or later). Keep up the good work. As far as ebike channels go, yours is one of the most thorough and informative I have found to date.

[@JeremiahMcintosh]

Thank you @AdventureTech I appreciate that.

[@pocketpunkie]

I just got back from the garage doing this freewheel swap on the 2.0 version. It seems even easier to drop the rear wheel in the frame than in your video. Thank you for a great guide, learning tool and portal to a better bike. The test drive was great and was well worth the $55 to upgrade

[@JeremiahMcintosh]

Awesome! Glad you like it!

[@tyroneleak637]

Nice video just completed 1500w 52vx52v battery upgrade on my XP Still testing so far 43mph and still accelerating one word Wow!

[@JeremiahMcintosh]

😮wow

[@yuppygoat]

This video was super helpful for me. Having never really worked on bikes, this gave me the confidence I needed. I'm a little embarrassed that I had fully tightened the wheel back before I realized I needed to put the chain on while putting the wheel back, which is a little awkward. For those with step-thru 2.0 like me, I didn't see a spacer disc anywhere while changing the free wheel. But the new freewheel seemed to work fine even so. Thanks again!

[@JeremiahMcintosh]

Great to hear you got it working!

[@BrisLS1]

19:29 New Gear 7 is like adding an Overdrive to a car. Awesome improvement.

[@bigonebikes]

I love your videos. Withing a few months we'll have 3 new ebikes in the family and one will be the Lectric XP step-thru so I've been having fun educating myself by watching your videos. You're doing a great job and I like how you cover the nitty gritty details and don't just assume we all know how to do these types of mods already. Also, having the Amazon affiliate links to the products you have added is a huge bonus for all of us. You get some pocket change and we get the correct parts. win win

[@JeremiahMcintosh]

Thank you Mark! Glad you are enjoying them.

[@jeffreypredom1546]

I completed the upgrade thanks to your video. Ran into a bit of trouble with my XP 2.0 ST that is different from the video, my bike did not have a removable spacer behind the original gear so when I installed the replacement the gears were way out of alignment and had to do some major adjustment. Luckily I found a shimano derailleur adjustment video and problem solved. Oh and the upgrade is awesome no more freewheeling here.

[@JeremiahMcintosh]

Sweet! Glad you got it working! Happy Trails.

[@aaronhostutler]

I put an 11-34 that you have linked and it is night and day. I mean totally different ride. The 34 was insanely nice to the point of getting goosebumps with first steep hill. I live in WV and on a hill so there's a few treacherous and some intermediate hills on my commute. I had to push on the huge ones before and now I can kick it in to 1st and pedal with absolute ease. I put it in 2nd for intermediate hills no problem. To give you an idea of how well it rides I can pedal it easily from a full stop with no motor at all and it doesn't feel like pedaling a tank. Also, before I was having trouble hitting 28 on flat ground and running out of pedal, now it's a humongous change and have plenty of pedal even when topping out. The only thing I had to adjust was the tension screw (not sure of exact name) that you can adjust by hand on the before the gear derailleur. Perfect video.

[@JeremiahMcintosh]

Awesome! I agree that it makes a huge difference! Thanks for the feedback 👍

[@steveblankenship5474]

That screw is called a B screw and is available in a longer length

[@ggebhard1]

Jeremy, you are an excellent instructor! The best, in my book. Your making sure we know the smallest of details is far better than anyone! And your camera work is superb! No one takes the extra time to make sure we see exactly what you want us to see. I was excited to order the parts to do this mod and remembered that I have the Lectric Light, that only has one gear!!! Ha! Ha!

[@JeremiahMcintosh]

Wow, thanks! I really appreciate that and thanks so much for watching and appreciating the work!

[@markjerstad4664]

Great job with the freewheel replacement Jeremiah! I've had my parts for awhile but glad I didn't try this on my own XP before watching ypur video!

[@JeremiahMcintosh]

Thanks Mark I’m glad you liked it!

[@lectrictraveler]

Finally replaced mine a month or so back and what a difference it makes when going 28 plus mph. I took pictures all the way thought the process, helps a lot. Great video Jeremiah. -- Chris @ LectricTraveler.

[@123windyron]

Nice seeing you wearing a helmet for your safety.i bought some clear safety glasses so the bugs would not get in my eyes for some evening riding when the bugs are out which works out great .have some great rideing.

[@kennethmiller6936]

I found by putting a long flat head screw driver between the frame and wheel, then gently pry it open a little bit. The tire will fall into place completely in. I’ve changed about 20 flat tires on my Yamee.

[@cyrilasfrenchyaz]

Just did that on my Gen3 ebike. Thank you! I didn't have any space and I had to adjust the derailleur but all good now.

[@vintagemxer9165]

Your method to spread the frame looks quite reasonable - no tools! Thx.

[@richardmelendez8858]

Just changed my factory XP 2.0 freewheel to an 11/28 and it went in so smoothly thanks to your video; by the way the size wrench for the freewheel removal socket is 24mm wrench.

[@JeremiahMcintosh]

Glad you got it installed and working correctly. Happy Riding.

[@Razorokc]

I just changed my Freewheel on my XP and it absolutely does make getting to 28 easier. Really glad I had your video also cuz I bumped the nuts and washers by accident got them out of sequins and had to look at your video to make sure I put them the right way :-) I took my brake caliper off and it made it much easier. It went right back on with no adjustments. The whole change wasn't 10 or 15 minutes.

[@JeremiahMcintosh]

Awesome and I’m glad you found it helpful. 👍

[@MrTUBER408]

Jerry : I changed the freewheel on my fat tire bike. The freewheel was a Shimano. The gears were 1st 28 and 7th was 14. The replacement was a DNP freewheel 1st 34 and 7th is 11. I had to buy a new Shimano Turney TY300 6/7 speed rear derailleur of of Amazon, from Larry's Bicycles. The cost was only $19.55 tax included. The derailleur that came on the bike was a cheap Shimano with no B adjustment screw. The jockey wheel would not clear the much larger diameter 1st gear. I bought a new chain and 2 extra master links. I had to add several links to the new chain, from my original chain, that was not stretched, to get the correct length to attain the correct angle on the tensioner jockey wheel arm. Great video series. By the way, what is the part # on the hub motor? Thanks

[@JeremiahMcintosh]

Thanks for the info Don. I was wondering if the 11-34 freewheel would clear the derailer on the xp. You said you changed it in your fat tire bike....was it on a Lectric XP or different bike?

[@MrTUBER408]

@@JeremiahMcintosh It was on a 26" fat tire bicycle. The 28 tooth sprocket is about 114mm/4.5" diameter, tooth peak to tooth peak. The 34 tooth sprocket is around 145 or 6mm/5.7" diameter, tooth peak to tooth peak. I have a Lectric XP on order. Lectric was supposed to start shipping on 4/27. If the derailleur on the XP has a B adjusting screw it may have enough adjustment to allow the jockey wheels enough travel to clear the larger 1st gear. The derailleur on my bike was designed to work pacifically with the standard 7 speed, 14/28 freewheel. Front and rear derailleurs have a sprocket max. size limit. I imagine that if the XP has a derailleur designed to work with a 7/8 speed free wheel it may work.

[@JeremiahMcintosh]

Thanks for the info I appreciate it!

[@RPMac]

The absolute best guy for Lectric reviews and upgrades....thank you Jeremiah !!!!

[@JeremiahMcintosh]

Thank you Keith I really appreciate that!

[@tenncutt]

Thanks just did this on my Fucare Scorpio. Didnt have that spacer to remove like your bike but i did need to readjust the derailleur to make it shift properly. All good now! So much better in high gear! Thanks

[@JeremiahMcintosh]

Nice! Glad you got it working.

[@tenncutt]

@@JeremiahMcintosh i get everything working!

[@tenncutt]

Got it up to 32 mph today. Seemed like I was still pedaling a little fast at that speed but maybe just maybe at 67 years old I shouldn't probably go that fast!

[@garyoster5309]

Fabulous instructions! Followed it to the T, first bike took about an hour, second bike in under 20 minutes. Great job Jeremiah!

[@JeremiahMcintosh]

Thank You Gary!

[@stevebrighttheblackguitar653]

I just install my new freewheel on the Mars HeyBike. There were a few differences. The spacer ring behind the freewheel component was not present at all on the HeyBike. There also is no retaining washer with the Allen screw. Everything swapped out perfectly. I also added whitewall tires just for fun, while i was taking it apart anyway. Haven't ridden it yet but the static test show no brake drag, shamano shifter goes threw all gear and are all aligned perfectly. gonna take it out later for a street ride. I am redoing my handlebar configuration now. Thanks

[@JeremiahMcintosh]

Cool and thanks for the info. Keep me updated to let us all know how it worked out after your test ride.

[@stevebrighttheblackguitar653]

Changing the freewheel on the HeyBike made me able to actually pedal at 22-24 mph instead of just going through the motions. It is a very worthwhile upgrade for me on my Ebike. thanks Jeremiah nice!!!

[@GenZyannd]

very much appreciate an amateurs point of view. when you look up hows tos by the pros, it always look so easy, but it's never that case when you try to do it.

[@JeremiahMcintosh]

Your welcome

[@devrugne661]

When you put in the new freewheel, did you use the freewheel tool to tighten it? I did not see that step in your video. Thanks!

[@BenGrilling]

Great video. I just added on my XP 2.0, 11-34 and had no spacer to remove like your bike, and everything fit perfect with no issues. I wish I had a 9-34 instead because I fell like I need more paddle on high speed and the 11 is better but still could do better to keep 30mph. My weight is 215Lbs. Better life at high speed with some hills is 10 miles. I will be adding a 2nd batter to get me 20AH and 20 miles range.

[@JeremiahMcintosh]

Sorry guys at 19:13 I made a mistake in the video and the factory freewheel is a 14-28 not 13-28 I don’t know what I was thinking LOL! It is not the same as sixth gear on the new one and you actually lose that gear so you only keep three of the original gears. See more information or Purchase your Lectric Ebike or Trike here (This is an affiliate link and does help support this channel) lectricebikes.sjv.io/g1OLJB

[@davidjohnson2779]

Where did you buy your new sprocket from?

[@JeremiahMcintosh]

There is a link in the description to the one I purchased.

[@dannybryant4440]

@@JeremiahMcintosh where is this available I cant find your link to where you got it, you have everything else listed

[@JeremiahMcintosh]

Expand the description by tapping on the arrow next to the title and all the links are in there. Let me know if you find it.

[@tockwashington964]

I Just Applied The 11-28 On My XP & Man What A Difference This Makes .. I Didn't Ever Really Pedal My Bike Before .. But Now With This New Freewheel .. All I Wanna Do Is Pedal .. It Makes The Bike To Me Feel Much More Powerful & Faster .. This Is The Best Upgrade To This Bike 💯⚠

[@ap14rcf70]

Any guesses what a local bike shop would charge to do this if you provided the new freewheel ?

[@dannybryant4440]

finally found it after lots of looking for the arrow you mentioned, never did find the arrow. but found the link under the show more tab way down towards the bottom. thanks

[@JeremiahMcintosh]

Ok great I’m glad you found it!

[@SGriffin597]

Jeremiah, Changed my freewheel today without any issues thanks to you. Your videos are very helpful and very informative! Thanks so much!

[@JeremiahMcintosh]

Awesome! Glad my videos helped! 👍

[@cmeditz]

Great video! I saw another youtuber showing how use a turnbuckel to help expand the frame. I needed it because it was way too tight to spread by hand. Great job and presentation!

[@JeremiahMcintosh]

Thank you! I appreciate that!

[@scoop4321]

Turnbuckle. That seems like a great idea. It would allow you to use precise yet powerful pressure to open the frame up. You only need to open it a little bit.

[@msujeffrey9598]

Great video Jeremiah! I have learned a lot from it. I have a question about the freewheel tool you used. Could you tell me what the measurement of the length of it is from one end to the other, and what the length is of teeth part of the freewheel tool that inserts into the freewheel? The measurement of the free wheel tool I bought is 1 1/8 inches long and the length of the teeth part of the free wheel tool is 3/4 inch long. I want to make sure I have the right size free wheel tool because I'm thinking my free wheel may be too short. Please make these measurements for me of the free wheel tool you are using. I want to buy the right size tool when I am changing out my freewheel. Thanks

[@JeremiahMcintosh]

The link for the correct tool is in the description of this video.

[@MrTimmmers]

A small tip, if you get hold of a threaded bar about half inch dia. (you might have one from your front forks when the bike was packed?) , two washers and nuts, and rwo blocks of wood drilled half through the size of the bar. Cut the bar until it fits between the rear top tube of your bike with the blocks on each end. Then if you fit the nut and washers to the ends , you can use the nuts to expand the rear enough to easily clear the wheel spindles. Remove it to get the wheel off, and replace it through the spokes and tighten it again to replace the spindle . Niice, cheap and easy way to do an awkward job.

[@GreasyStool]

Changed mine on the Lectric Premium mid drive. Funny! I support mine from the rafters in the garage with a couple of motorcycle tiedown.

[@wildbillcarroll]

Hello thanks for video's my question is the special socket you used to loosen the gears do you need to use it to tighten the new gears you put in?

[@tikercat]

I am getting the bike next month. I want to put the sweptback handlebars on for comfort. Question: do I need to know the stem size or any other mounting concerns when ordering new handlebars? thanx

[@JeremiahMcintosh]

Based on other people I believe they need to be 25.4mm where they mount but I haven’t upgraded mine yet.

[@tikercat]

@@JeremiahMcintosh thanx, I have a concern about the tires on the xp. I put slime in each tires, and inflated them to about 18lbs. Rode it first day about 20 miles, no issues. The next day I rode it about 3 miles, the rear tire went flat. There were no holes in tube or tire, but I discovered when you inflate them keep the bike on a rack or just somehow do not inflate while bike sits on the weight of the tires. They will not seal on the wheels properly. Slowly inflate them while rotating the tire to see if they seal onto the wheel evenly. Then after I inflated them, I rolled the bike around pushing down on it to insure a seal. Seems strait forward when inflating them, but they easily will not seal correctly if not careful. Also, there is no cruise control, I followed your instructions, and cruise control does not come up on screen, only walk, no matter how short/long I press the down button. Maybe this is an option they do not offer on the 2020 bikes. thanks again Jeremiah.

[@JeremiahMcintosh]

You should have cruise control you have to be in PAS 1 through five hold the throttle without pedaling to your desired speed and then hold the down button at the same time. If you are not holding the throttle then it will go to walk mode.

[@lemvawter8010]

Thanks so much! I changed mine out without a hitch.

[@charlespotokar2375]

Awesome!! I’m loving the xp modification series! Jut received the seat and post from the last video and it really is a must. This is next:)

[@JeremiahMcintosh]

Awesome thank you!

[@joevarnum926]

I do not believe I have seen a better instruction video. You were right on perfect. Thank you so much Jeremiah.

[@barneysbar4032]

You'd nearly changed everything on bike dude,must admit it's looks better with your new models & seems to be more of a smoother ride. Regards.

[@dartegnon12]

Getting my xp2 next week. Will be my first upgrade I make

[@chuckkelly7870]

Jeremiah, I was wondering how I would work on my bike upside down with damaging the components and computer display. Since I did not have the styrofoam blocks or bench to use I came up with an alternate idea which is great for those folks in apartments or spouses not wanting you to use the family coffee table. (-: You inspired me to to get a couple foam yoga blocks to rest the front grips on, and an 18" folding step stool to rest the rack on. Here are the links from Amazon for anyone who wants to do the same. Foam yoga blocks - folding

[@a_missippian]

for repairs on the fly get handlebarjack.com - just got mine this week - neat little setup

[@a_missippian]

for repairs on the fly get handlebarjack.com - just got mine this week - neat little setup

[@davesaylor7739]

Great video. Thanks for your efforts in helping novis bike mechanics in doing their own upgrades.

[@vcancer]

I have a Sondor's SX bike land love it, but as you said earlier in the video once you get to higher speeds on the bike it's like your Wile E Coyote running in the air before the big drop. I didn't change the freewheel since I didn't know which one to get but now I do. I did change the crankset of the bike to a bigger size instead of the stock. That made a whole lot of a difference in the pedaling now. I can crank the bike with the higher speed and get more speed out of my baby. I plan to also change out the freewheel now that I know which one to get. Thanks for the video.

[@chuckkelly7870]

Caution when mounting rear tire! Jeremiah, I did not replace my freewheel yet, but did have an opportunity to remove my rear wheel to replace tires and tubes and slime them. A few days after the repairs were complete I happen to notice my chain/derailer was very close to my tire when in 1st gear, almost touching. I compared to my other XP and noticed the other had an approx. 1/2" clearance. After confirming that my derailer and other components were not bent I attempted a derailer adjustment to no avail. I then stuck my fingers in between the frame and front of tire on each side and confirmed the tire was centered. I then compared to my other XP and realized the tire on the other XP was mounted slightly bias to the left. That is to say the front of the rear tire is approx. 1/4" closer to the frame than the left side. When I researched this it turned out fat tire bikes in general have tight tolerances between chain/tire especially in 1st gear due to the fat 4" tires. Makes sense. To fix the issue I loosened the rear axle nuts on both sides and lifted the rear of bike off the ground. I could then shake the rear tire and realized the washers with a lock tooth allowed the wheel mount to move approx. 1/8" on the azimuth . I pushed the front of the tire towards the left (or rear of tire towards the right) like the other XP and tightened. Chain alignment issue was now resolved with a substantial clearance in 1s gear. I wanted to point this out to anyone who removes the rear wheel for any reason. You need to verify that when in 1st gear, your chain/derailer are not rubbing against your tire. In retrospect, Lectric should have used a 6 speed freewheel and allowed more of a gap between the 1st gear chain/tire clearance rather than having to install wheel off center.

[@13Voodoobilly69]

Are you saying that when the axle is sitting completely seated in the axle frame dropouts with the nuts loose that the wheel is not correctly aligned and you tweaked it sideways for clearance before tightening?

[@lylejenkins9374]

Thanks for taking the time to do this Jeremy. This is the first upgrade I mad on our two XP ST's. I used the 11-34 tooth because we have lots of steep hills here in Utah. Your video mad it a breeze to do this work.

[@JeremiahMcintosh]

Awesome and glad you found it helpful! Feedback like this is greatly appreciated and what keeps me creating content!👍

[@JerryBrown-qy9gh]

Great job, buddy. I changed mine a few months ago and would never go back.

[@JeremiahMcintosh]

Thanks Jerry. Right after I took it for the first spin I realized I should’ve changed it along time ago LOL

[@ziyadchomery9471]

Great video! Followed it step by step and it worked beautifully to change my freewheel! Thanks! My gears match my motor speed pretty well now...

[@JeremiahMcintosh]

You’re welcome. I’m glad you found it helpful.

[@brandonlee979]

Great tutorial! I may change the freewheel when I change my rear tire.

[@robertryancurry9290]

Jeremiah I just ordered my lectic xp step though model in white model this morning thanks for giving me best advice

[@donclark8484]

Great review. I just got our Xp lectric bike last week I can already tell it is awesome. The only problem is the speed o meter and trip doesn’t work. Lectric said they are going to send me a new wheele and motor. The motor is why it’s not giving the speed. I have to what to see what all I get.

[@JeremiahMcintosh]

Wow that’s crazy that you would need a new wheel? Let me know when you get it if it fixes your problem I’m curious. Thanks

[@SteveSorgatz]

Excellent commentary. I'm upgrading from a 2016 vintage ebike so the comparisons are helpful to me. Thanks.

[@Lumicron]

Will adopt this on my ado a20+ wich has a cassette one. I felt always that the transmission ratio for gear 7 is too high. Especially when unlocked to higher speeds than 25. Thx

[@letricdeucedotzeroadventur376]

Two motor wheel spokes broke from the part opposite of the nipple on my Letric XP 2.0 is it temporarily safe to ride until I get it repaired?

[@JeremiahMcintosh]

I wouldn’t recommend it. You risk breaking more.

[@robo3142]

I have an rize blade put 60 T on my chainwheel panel end it works ,thing about 80 T on either chainwheel or cassette end . have fun ?

[@Jokero_YT]

Great videos, I have subbed! Question though, can you upgrade the 3.0 tires on the new Lectric bike to 4.0 tires on the same rims? Also where could I find a set of the blue rims that you see on the Sondor Fold ebike?

[@JeremiahMcintosh]

Not sure about the rims but no you cannot upgrade the 2.0 to 4 inch tires because the tires would be too wide to fit in the frame and forks.

[@user-df3kt6ox1t]

I bought the tripod stands for the handle bars. They work great. Maybe deflate the tire to take it off.

[@mrwilly41]

Looks good, not too hard looking. Would like to mention that now would have been be a good time to remove the tire/ innertube and wrap gorilla tape around the inside of the rim for extra protection from the spokes.

[@JeremiahMcintosh]

Good tip but I did flatten the tires enough to pinch it in to make sure the liner was installed correctly covering all the spokes.

[@edsanchez2534]

THANX EXCELLENT VIDEO AS USUAL…WILL BE UPGRADING TO AN 11-34 THIS WINTER ALONG TIRE CHANGE(GREEN) TANNUS ARMOR, NEW HANDLEBARS AND A FEW OTHER THINGS FOR MY STEP THRU…THANX AGAIN KEEP UP THE GREAT WORK!!!

[@JeremiahMcintosh]

Awesome! Thanks Ed!

[@rogertebow9923]

Should we be putting grease inside the freewheel for lubricant?

[@E-BikingAdventures]

I just ordered a 11-34. My cheap chinese stock freewheel has a busted 11(7th gear). The ratcheting has so much play in it, that it bangs every time you start to pedal. You really do need that 11 for an ebike. I've never had to gear down to 1st, but my bike came with the 11-34, so that's what I ordered.

[@remixread]

Yeah I did the same thing on my Ecotric fat tire bike so now my 6 and 7 gears give me a better ratio while keeping the 28 teeth etc for hills etc. Thank You

[@JeremiahMcintosh]

Thank you! How do you like the Ecotric? Do you have the one with the 500 W motor?

[@remixread]

Jeremiah Mcintosh I am very happy with it and the company has been very responsive when I had a S900 cable fail. They sent a warranty replacement LCD right away. I have the 36v 500 watt motor, but I also added a 500 watt 36v mxus motor to the front with a second controller and sw900 lcd. The bike no longer slows for hills, but the gear ratio made a night and day difference so I no longer over spin the cranks in 6th and 7th gear. I am 6ft 250 lbs and I get a consistent sustainable 25mph using pedal assist @ 5 in 7th gear. Thanks

[@spiritsoul5060]

Super informative and helpful. I've ordered my parts and can't wait to change them out!

[@JeremiahMcintosh]

Glad it was helpful and I love the new freewheel!

[@scoop4321]

I have a black Lectric XP and after viewing this video, I ordered the same freewheel that you did, and I swapped the stock Shimano 14-28T for the new 11-28T. I noticed a small problem with the new freewheel. I noticed some slight clicking noise in gears 1, 2, 3 and 4. I tired adjusting the derailleur, but it didn't help. Then I discovered there is a wobble in the freewheel, which is causing the chain to slightly misalign with the cogs thus causing the noise. The wobble is at least 1/16th of an inch, maybe a little more. I didn't check the stock freewheel for this wobble. Did you experience this wobble with your new freewheel as well? I don't know how to fix it. Maybe switch back to the stock freewheel.

[@JeremiahMcintosh]

Most freewheels will have a wobble, Both of mine do. Did you remove the spacer before installing the new one?

[@jefftaylor5816]

Love all your videos. I have ordered 2 xp stepthru bikes.

[@JeremiahMcintosh]

Thank you!

[@germanwarrior6463]

Great video and is there a after market chain you can get for the Lectric bike? I thought a blue one would look cool.

[@JeremiahMcintosh]

That would look cool but I’m not really sure.

[@MichaelrennieG]

Thanks, fixing back tire flats not one video covers that notched spacer and how it should be placed back when putting wheel back on frame

[@donsena4198]

Great video, very helpful, just swapped out my freewheel on the XP 2.0, amazing improvement!

[@randyholly2594]

you really do a good job on your tutorial videos Jeremiah.

[@JeremiahMcintosh]

Thanks Randy. When I make my videos I try to address all the questions I would have. I’m glad you like them! I did mess up on one part of the video and it is driving me crazy but I don’t want to delete and re-upload it.

[@franksnyderfinancial1673]

Watched the video and successfully made the upgrade just how you described it. Would have had no idea not to use the spacer. That little tidbit would have caused me to have had to do it twice. Getting the wheel back in / disc brake at the same time is a bit of a challenge. The hardest part was after I finished. Had to watch another video on how to adjust the derailleur. This video was very helpful. kzbin.info/www/bejne/i5y9qYN_j5ahnbs The new part and the tool are available on Amazon. The performance is amazing. Now pedaling hard you can push 30 mph! Thanks for the video!

[@twister4489]

There is a guy who made a spreader out of a 4 inch turnbuckle with cane feet that fits between the frame easily and holds it open. He posted it on KZbin as well

[@JeremiahMcintosh]

Yea I seen that but I don’t need it because I can easily remove and install my wheel without the spreader.

[@heathwirt8919]

My Letric XP step through arrived a couple weeks ago and I agree that the gearing is ridicules, I don't understand why Letric chose the gearing they did with the capabilities of this bike. Is the 11-28 enough?

[@edburgler5161]

Hi Jeremiah, We Received our two XP 2.0”s a few days ago. I definitely want to put a different freewheel on. Even in PAS 5 and in the 6th or 7th gear the pedals cannot catch up to the motor, and I have not even adjusted the speed to 28 mph yet.Will the 11-28 freewheel work as well on the new 2.0 Lectric?

[@FrankiesWorld]

I need to do this for my next upgrade, I have been hearing alot about it. Love your videos! I have been doing similar ones for this bike on my channel. Thank you for this!

[@reinaldogines6248]

Hi I been seeing your video’s about the folding e-bike and I live in a 4th woke up is there a folding e-bike with high speed duel suspension rear rack and light weight that you recommend

[@stepbackjack4194]

Did you consider changing the front chain ring instead? It's a 51T which on a regular bike would be the biggest of a 3 ring set. I'm rarely on the big ring on my bikes and only used for speed going downhill.

[@v4v777]

I think the front for the Lectric's are 52T.

[@JeremiahMcintosh]

I think you are right it is a 52t. Also I stated the factory freewheel is a 13-28 I’m my video but it is actually a 14-28.

[@darlam40]

What size rims do you have for your bike? I see you have 20x4.0 tires on your bike are you still using the same factory rims?

[@JeremiahMcintosh]

Yes they are the factory rims and tires that came on the 1.0.

[@Saddletramp1200]

Tip, Two small crescent wrenches on the back of the flat part of the frame act as handles. wheel will fall right in. Having a second pair of hands is ideal.

[@johnsheetz6639]

Yes! I look up tire changes for the future and it scared me some not all people need a frame spreader im low im the tool area!

[@Saddletramp1200]

@@johnsheetz6639 measure the wheel size, it's not a 20inch tire. Motorcycle tires will fit the bike.

[@johnsheetz6639]

@@Saddletramp1200 i was just talking back tire changes in general ive heard the back is to tight on the rims.

[@Saddletramp1200]

@@johnsheetz6639 I have 200 miles on my bike so far, it will be a while before I need a tire. I will get a Metsler 16 x 3.5 for my bike.

[@damnbrosky]

Hi question, it is possible to montage a 9 gear freewheel or there is no space for that ? I would like to change a rear derailleur to , for 9 speed shimano xt or sram x9 with shifters of course.

[@AC-db4ek]

Hello Jeremiah. I live in Europe and I can't use your link but I found the same brand Driftmaniac with 11-28 but it'a a flywheel, not a freewheel. Is there any difference? Can I use a flywheel instead of a freewheel?

[@lgbtrain1]

Hi. Was doing real well attempting to remove the back wheel on my ST 2.0 to change the freewheel. Carefully cut the zip ties, took lots of pictures too. HOWEVER, I could not even slightly unscrew either axle nuts. It's as if they're welded on. Any suggestions?

[@Streeknine]

Great video and amazing camera work man... thanks for the information and good examples of what to do and not to do!

[@chrismckenzie820]

Another very highly informative video. I have a few of the same mods you have on your bike just based on watching your videos. Definitely will do this with my bike soon. Keep up the content.

[@JeremiahMcintosh]

Thanks Chris! I love the upgrade, it makes a big difference at higher speeds.

[@johngrima2692]

Hello Jeremiah, Does the upgraded free wheel impact the range/distance at all?

[@JeremiahMcintosh]

Not really

[@shawnburt5349]

Just did this upgrade and it's definitely worth it 👌

[@JeremiahMcintosh]

Absolutely! One of the best upgrades for sure!

[@pablojonathanduranra]

@@JeremiahMcintosh why did u had to change it? And tell me the difference between the original freewheel and the replacement one of you don’t mind and thanks

[@JeremiahMcintosh]

Check out my video here and it will show why I changed it. kzbin.info/www/bejne/b5W3mJWZrr5_eKc

[@binhtngo26]

Did you change the freewheel on the step thru yet and if so. Is it the same parts and same process thanks

[@JeremiahMcintosh]

No I have not but the parts and the process should be the same.

[@pjgiantsfan1]

Great video. I will attempt this on the G-Force T42. Have you done this on your T42 as well?

[@JeremiahMcintosh]

No I have not yet but it should work.

[@pjgiantsfan1]

@@JeremiahMcintosh Just put this freewheel on the T42. It went on almost exactly like the Lectric. I also had to remove the shim that went between the freewheel and the motor. Unable to test it on the road but the gears seem to shifting well. I may need to adjust the derailer slightly once I road test it. I am looking at the Anioki A7 Pro now. My wife loves the T42 so I may bite the bullet and buy the A7 Pro.

[@AntPorr]

Awaiting an online tube to fix my flat, rear tube, at 255 miles. Patching not successful due to extreme puncture. Found an idea for a rear stretcher from hardware turnbuckle + cane tips from a different youtuber. Wish me luck 🍀

[@JeremiahMcintosh]

I’ve had my back wheel of twice now and haven’t needed a spreader. Good luck

[@AntPorr]

Thanks. Got the new tube in the rear tire and had no issues with the frame pinching the hub. Your encouragement is appreciated. 258 miles on the odometer.

[@JeremiahMcintosh]

That’s great I’m glad you got it fixed! Happy riding!

[@nenobujas6567]

Is it possible to change main crankset with bigger ( more teeth ), also to achieve better pedaling? BR

[@heathmiller6952]

I have the xp lite with 16t and would like a 11 t what's your advice on making these changes ?

[@EdMorleyTube]

if u can take some measurements of and or video of the handlebar post connection to the fork.? I should be getting my xp in the next couple of weeks and am planning to upgrade the fork to a suspension fork. ive found a few fat tire forks but haven't ordered anything yet because im not sure and I dont want to spend money on something that wont work / fit the frame. I think you might like the upgrade and get views on a video upgrading the fork. its definitely one of the top wants of owners as far as ive seen. someone at lectric said they hadn't found one that works yet.? but if you did an amazon affiliate link to it might make you somethin.? just a request/idea if I get mine and do the upgrade before I see a video from you on it ill post a link to the fork and any special tools needed. thanks for the freewheel info.

[@goody7531]

Would it work to change just the single front sprocket with a slightly larger one? Just seems like that might be easier as long as it fit and didn't run into anything.

[@13Voodoobilly69]

You could but keep in mind a front sprocket change will change all of your ratios. So if you are looking for a higher final ratio (slower pedaling at high speed) changing the front will also make your first gear higher ( less hill climbing capability).

[@tithonusthomas4147]

Hey buddy they now have a step thru bike for pre order maybe you & your wife might like that for her ! Keep riding & i watch all your videos 👍

[@JeremiahMcintosh]

Thank you! I have seen it and have been looking for one for her🤔

[@DeNFlix...]

I advise people to think about where they will be using their bikes. Where i live its all up and down terrain, not much flat, so i went for the 14 - 34T which gives me plenty of gears for the hills. I think the 11-28T is a great choice if you ride your bike on mainly flat terrain.

[@JeremiahMcintosh]

Or you can use 11-34 and get the best of both worlds!

[@DeNFlix...]

@@JeremiahMcintosh have to be careful getting those monster range flywheels because the chain would be slack one end and tight the other end.

[@Joozzua]

@@DeNFlix... new chain ? will fixit?

[@jim5269]

Hey Jeremiah, my shop did my install. They left the spacer on inside of the freewheel between the motor. They must have adjusted the gears because the bike rides and shifts perfectly. Do you think I should take out the spacer?

[@JeremiahMcintosh]

To be honest I don’t know how they got it to fit back in the frame with the spacer because when I did my install I have noticed that it makes the freewheel stick out a little further that’s interesting. I’m not sure what to tell you if it’s working fine it might be OK? please keep us updated what you decide to do thanks.

[@jim5269]

@@JeremiahMcintosh It rides great but looks so odd because 1st gear is 1cm from the motor & 7th is about 1mm the frame. There is almost no margin for error is something moves out of alignment thx!

[@67daffy]

Do you think that freewheel tool will fit over the axle bolt and still get the freewheel off? The plug for my motor is too big too allow axle bolt removal so no freewheel changes for me...

[@JeremiahMcintosh]

No it will not. Is your bike Lectric I’ve only heard of rad bikes being like this ? I believe there is a tool for this with a slot cut in the side of it for the wire to go through.