Lecture # 3 Formation of tie-set and cut-set matrix and its application in KVL and KCL by Dr. Niraj

[@asiyaahmed5791]

Sir how J4 = I1 It should be -I1 as in 4 I1's value is -1

[@RFDesignbasics]

Can you please be more specific at what time in the video?

[@kumarshubham5537]

@@RFDesignbasics sir at 7:15

[@RFDesignbasics]

Yes, it should be -I1. You are absolutely right.

[@orangeshoes]

@@RFDesignbasics You shoul dpin this comment as well!!

[@orangeshoes]

@@RFDesignbasics You shoul dpin this comment as well!!

[@davedarius7346]

Thank you Sir, The explanations are very clear and easy to follow! Finally, I feel I got the whole concept down after 5 years, thanks to this class 👍🏻

[@erturkocakk]

haven't found a clear explanation about this topic in youtube. thanks a lot sir, I got the concept finally.

[@KAAO-zt1rh]

Sir ur explaining with extreme patience sir,it helped me a lot sir . Thank you Sir 🙏🙏🙏

[@omvirutkar6829]

Very Easy Concept And clear Doubts sir 😊

[@kgovardhanacharygopi2286]

Thank you so anna it is clear explanation about cut set matrix once again thanks a lot

[@pathuzworld3748]

Sir your class is interesting pls upload another videos related with circuits and networks (z and Y parameters),.......etc😍

[@RFDesignbasics]

Thanks... It is already available Kindly check the playlist.

[@kashukhan5953]

ok

[@programming40guru]

Only 3 part available? More videos send fast..

[@dandysunday7885]

i love this tutorial

[@satishallam552]

Very good explanation and neat explanation 👍👌👍👌 keep it up sir

[@kumarswamypandiri8582]

Excellent explanation sir😊

[@DebojyotiDey-sn2lb]

Please Provide CUT SET MATRIX AND ITS APPLICATION IN KVL ALSO.

[@adarsh7676]

Sir in tie set problem, you have marked direction of i2 combined with i1 loop, why that

[@Shravyaclasse]

Guru ji ap boht achha padhate ho

[@RFDesignbasics]

Dhanyavaad

[@-DivyaSri-ze4sw]

plzz do videos on Dual n Duality !!!

[@UECAshutoshKumar]

Thank you sir

[@pooladasu-18]

Sir I have doubt on tie set matrix Sir in tie set matrix loop currents are considered in clock wise direction sir why we should not considered the link direction please clear this doubt

[@shagilramesh3536]

Sir , when there is a circuit is given and we have to draw the graph ,, is there any specific way to give the branch the direction .. or it is just assumed

[@RFDesignbasics]

It's just assumed if not given. Generally current direction is taken if known.

[@arunakarhegde9751]

Very good explanation sir.

[@jaysen3908]

Very NYC explain

[@rajatmetha5400]

Sir why I2 having whole loop in the tieset matrix? Why it should not only for 2nd loop is from 2 3 4

[@RFDesignbasics]

I couldn't get your question.

[@shivamurthym477]

Yes thats mistake u only take 2,3,4 when considering loop 2

[@arastraninsan9798]

Normally entered currents to node were taken negative, but entered currents to node in cutset method were taken positive. I am confused. there is a contradiction. please can you explain the reason

[@RFDesignbasics]

In cut-set, you just follow the direction of current in involved twig(tree branch) for a cut as postitive

[@arastraninsan9798]

@@RFDesignbasics I did not understand. we take entered currents as negative at first. After that we made vice verca in cut-set method. why?, is it a rule?

[@RFDesignbasics]

No, such assumptions.. It depends upon the direction of current in twig involved in making a particular cut

[@strange1306]

Good explanation sir Thank you

[@bmebri1]

Good explanation, but examples could've been better without the mistakes. Thank you.

[@ashutoshmishra4242]

Thank you sir ☺️

[@ITSupport19]

pls send PDF also

[@chedipakamounika6764]

supper sir your class is excellent

[@indrajitreddy8543]

Thanks keep watching videos

[@RFDesignbasics]

Thanks!!!

[@RFDesignbasics]

Welcome!!

[@dandysunday7885]

please sir, how do we convert circuit diagram to network graph

[@amitchandelleet-2849]

Sir , cut ki Direction kese legai vo ni bataya aapnai....?

[@RFDesignbasics]

Cut set mein cut aisa lena hai jo graph ko 2 part mein divide kare aur ek hi tree branch ko cut kare. Tree branch ka direction hi cut ka direction hoga

[@zeeshan123633]

how do we assume directions?

[@play_lap151]

[B] is a Tie-set Matrix @ 19:25

[@RFDesignbasics]

Yes, check the pinned comment.

[@SrinivasRao-ij9tf]

Good

[@RFDesignbasics]

Thanks

[@natureisafuture2165]

How to solve this equation

[@anupkumar-kf4rg]

[B] represent tie set marix or cut set matrix at the time 19:20 you say [B] is cut set matrix and at that time you study the application of tie set matrix . so please clear it.

[@RFDesignbasics]

[B] is tie-set matrix, my mistake while speaking out.

[@anupkumar-kf4rg]

@@RFDesignbasics thank you

[@649vijay2]

Nice broh TQ ❤️

[@HemanthKumar-yk8iy]

Sir explanation was excellent

[@RFDesignbasics]

Thank you!!

[@jyothikaouku7440]

Why should we only cut at node 3,2,4

[@RFDesignbasics]

Because these nodes contain only one tree branch. Node one is having two. Condition for cut set is one tree branch(twig) and remaining links.

[@nallamallianjani2553]

Sir,Really its very useful to me...thanq so much sir....🥰

[@researchandsciencefact2021]

Thank you...sir'

[@shekharnarwal2025]

👌👌

[@RFDesignbasics]

Welcome

[@rjcreations6174]

Sir teaching is good bt pls raise ur voice

[@big_2361]

Why tf do i have to learn these as a cs student... i don't plan on programming a spice simulation any time soon so how does any of this even remotely help me..

[@lovelychauhan664]

life is unfair

[@big_2361]

@@lovelychauhan664 ye. i got my degree. it wasnt worth it

[@big_2361]

@@lovelychauhan664 ye i graduated. it wasnt worth it. wasted 4 years of my life

[@mohshinkhan4415]

7:41

[@sribhavyapunyamurthula3774]

Thank you sir

[@zyr85]

Thank you sir☺

[@stenisvarghese105]

Thank you sir