LED VS OSL on Miniatures - Which wins?...

[@TabletopTime]

10% off EVERYTHING at www.itstabletoptime.com/ (limited sale!)

[@bionic_pyro7220]

Ayyy, I don't suppose you could tell me where that 2nd model came from, as a fellow Heresy-Era Death Guard fan, I must know.

[@JustLilGecko]

Long turnarounds for the credits is appreciated!

[@Onk3lM0]

Two things: 1: I would highly recommend starting from a white basecoat when you build up a fire effect. It's just soooo much easier to get the yellow to cover than painting it over straitght black. 2: When you hollow a model I would always use a small UV light and stick it into the hollow inside to cure the resin there. Hollowed prints with uncured resin inside of them are known to burst apart when the temperature changes.

[@garywhite8292]

proper drain hole will prevent number 2. but I like the small light idea never though of that but ive never had those problems.

[@bionicgeekgrrl]

Better to print a separate bottom perhaps so you can guarantee being able to get uv in there etc, and makes things easier for leds in this instance.

[@OldZean]

Appreciate the "clean" neutral showcase at the end!

[@Sangotom1]

Longer reveals are just about AMAZING 😍😍

[@yomanink]

Love the long turnarounds, gives more time to appreciate the detail

[@v02max75]

I was JUST looking at the model that Murray did on the Instagram page. Beautiful serendipity

[@Sharp_Stone]

Longer clean reveals are nice indeed. Also, maybe do a best of 2022 minifigs painted ^^

[@becj5481]

The clean turn-around reveals are great, please keep doing them.

[@RyanEdwardsVA]

Please for the love of god *keep doing* the long reveals/turnarounds! I found this channel only a few months ago and watching some of the old videos where it's just the cinematics honestly felt like - and I apologize that I cannot find a more appropriate way to say this - being blue-balled. Let me appreciate your work! Let me admire the paint jobs and the craft! While I appreciate the work that your cameraman goes to, the smoke and colored lights are not what I'm here for, I'm here for the models you make, and boy, getting to see them in these long turnarounds? They deliver.

[@TabletopTime]

These reveals were brought to you by Dave just for the purpose of letting them breath. It's fun to do the smoke and fancy stuff, but sometimes you just want to watch the model spin

[@RyanEdwardsVA]

@@TabletopTime absolutely! Just take in the details, get to appreciate it as it is. It's brilliant.

[@harigarou]

AVG's sci-fi releases have been SO much better than I anticipated after the Space Dwarf first set, I didn't expect so many months of #spacehell in a row. Awesome to see y'all tackle some of the big bads. Also blowing my mind using hollowed prints to wire for LEDs, well played!

[@michaelssomerville]

Like the longer reveals and turnaround!

[@MagashiSaizen]

Whatever you're paying Murray is not enough, he's so good and I don't think even he knows how good he is at painting!

[@garywhite8292]

I vote you guys make a full reveal montage or compendium video monthly or what ever with some snazzy music in the background oh and a playlist

[@christophe7723]

Hi guys, thank you for the reveals! I think if you want to showcase OSL, doing a reveal with colored lights is a bit of a waste... difficult to tell what comes from the OSL and what from the external pink light

[@TabletopTime]

That's why we had turnarounds with neutral lighting as well!

[@kirksabio2382]

Ngl Murray is a painting god. Idk how he does it like he does.

[@pierrechristen7221]

Where did the models come from? They are really nice. And awesome paint job on all of them too.

[@Cannon6969]

Seeing as they didn’t mention who the models came from in the video, I think they’re the sponsor who fell through that they talked about in the merch part

[@MisterTingles]

That paintjob on the scorpion crawler looks absolutely bananas, Murray killed it!

[@mapachitomapachosodelamapacher]

Loved all of the 3 works!!! You're so talented guys and girl!

[@grimbostink7607]

Those turnarounds are JUICY! Honestly all 3 models look great. I use OSL on a few models but I think I might be looking into some LEDs for my larger vehicles

[@Mystrich]

Love getting to see longer reveals!

[@thomasohanlon1060]

This video should have had each style presented on the same model, this way we can see the different finished projects next to each other. But this is just my opinion, no matter great job and great video.

[@serpentartist1348]

These all look absolutely incredible

[@yellheahtris]

Absolutely amazing work!! Seeing insanly well done OSL is one of my favorite things about the hobby as it's something i cant do yet myself. And the slower reveals are SO nice!!!

[@DaWild]

You guys have gotten so good since you started this channel!

[@ClarissaMeyer]

Those turned out great! One of these days I'll get over my reluctance to try it on one of my minis.

[@altonblue6921]

Once again going to ask for Jen saying "I will have 'nun' of your puns" or some variation of it on one of your Warhammer 40k related videos

[@rachelduffy9458]

“Die son” had me cackling Murray 😂

[@LathanM]

Nice work. The big model would have been killer to do with an LED base so you could combine the different techniques in one model.

[@Writh811]

The LED version is cool and will work in the dark but I feel like, ironically, it had less of an impact on the model. I'm guessing to get the best out of LED on a model, the LED's can't be part of the character and would have to be shining on them but I can see that coming with some many more challenges. Jenn's OSL was awesome and Murray crushed it out of the park. I would argue the deciding factor between those two for me might have more to do with the model choice, thus the light source, rather than the OSL paint job. Either way all 3 are incredible and I would be proud to claim any one as my own.

[@gunman292929]

i am definitely surprised you aren't using the Vallejo Metal Colors line for your metallics, is there a reason you could share?

[@Frozenkoldfury]

Okay, that might be the best paintjob I've ever seen from Murray. All of these look great, but I think Murray might have won this one.

[@dougjones3305]

I am looking into getting paint or clear coat that is similar to the reflective stuff they put on traffic signs. I ordered highly reflective black paint (not to be confused with metallic or gloss) and spray can of clear reflective coat. Personally I'm trying to achieve the glow that comes from the armor and from under and behind the head of Horus lupercal, the Horus ascended model in particular. I'm thinking of painting behind and below his head and Then going over it with a reddish orange glaze. We will see how it ends up.

[@cerisekappes580]

Love the clean reveals!

[@BubbaR2D21]

Yes please more model showcases at the end

[@troy6882]

The two UV redemptor slot holes we did with glow green faces look great did a hole power join cable and teleport beacon still building the chargers and battery GW should have included in kits these days???????.

[@diginic117]

Loved the long reveals

[@ghostXD00]

I cant be the only person who thought the 2 model was from doom eternal

[@Tommiart]

Dave, put a little weight on the end of your thread when feeding it through the model...much easier, especially around corners.

[@StalxD]

The mini that Dave used gave me doom demon vibes

[@robparfrey642]

What sprayable streaking grime did dave use? Does the sprat come with it or is this somthing they have made with streaking grime and a perfume bottle or somthing?

[@Ridevans4life]

I hate pulling supports through small holes. i normally set up the entire area that hidden with little holes, then cut between the holes with a small hobby saw/nippers/xacto.

[@rogue1874]

Great video guys. Can you please tell me where the models are from?

[@Wolfing1785]

What is that LED she is using for lighting it's so cool.

[@krait9964]

What are those lamps you're using for reference lighting?

[@mildlycornfield]

I love the MSTness caused by Jen and Murray's little comments whole Dave is doing voiceovers

[@razorbaron9160]

How do you have your second batch of xpress paints and my first I ordered 6 months ago still hasn't arrived yet? 😕

[@LizardofDoom]

There’s something about putting real lights in a model that makes my brain fizz in a good way

[@juanbotha4626]

Don't know if I missed it but where are these minis from?

[@rebeccaverrall3658]

They're archvillain game's scifi stuff, I'm guessing they were the sponsor who fell through!

[@deathjester1975]

what are whose cotton balls called you used to remove the streak n grime (9.25 minutes) i wants some for my tanks it take for ever to use normal sized cotton buds

[@Hukahey]

That looks cool like the led look !

[@samhoban2509]

Dave needs a wowstick. Link for that small portable light?

[@thermoshok]

which models are those id like to buy those ones

[@TruthTealler]

i really enjoyed this. more models more paintng. its great. love it

[@skykus8712]

May I ask where I can find that amazing tracked demon so I can have my own??

[@Amras22520]

It would be awesome to have a real LED tutorial ! I would love to put some in my tanks but I don't know how 😬

[@quintennevenhoven8974]

Video 52 of asking for the Thunderbear cavalry and the Storm bear rider. These would use the Thunderwolf cavalry and Stormrider statblock. Different punny name needed

[@theticksquad8218]

so is the "Big Boy" a DOOM mancubus on tank treds?

[@aaronfuentes5919]

Wow, this channel is fun!

[@TheInsaneupsdriver]

fir the first model, i would've 3d printed in transparent a custom smoke piece that covered the light completely, then shaded it to make it look like smoke and fire.

[@footrot17]

That's nice. Start a channel and do it.

[@psychoblack1411]

jezza is the linus of the art world

[@charliebudworth6198]

‘ it’s jazza here coming at you from the closet’ 😂

[@StibioPrimaris]

Turnarounds much better!!!!

[@callmethemonarch6038]

00:15 mans just took her light like that lmao

[@Ronin2300DK]

Ok... Hold up! Where are those models from? :O Would love to add them to my collection!

[@robin71055]

Please Make Box Wars Armor!!

[@ritchmulholland7044]

Guuuuys. Where han I get these models

[@TheSickness]

Windows 3D Builder has a hollowing feature without supports, making an empty shell

[@sammich4009]

I enjoy your guys content and I want to get into warhammer

[@footrot17]

Me too, but drukhari and skaven which I want both have the worst model range. Pm nothing is available in Australia.

[@killjoy5325]

Honestly at first when looking at these models I thought they were like proxy models of the Demons from Doom 2016 and Doom Eternal

[@howardmrhstudio1436]

Why hasn't the Murray method been adopted widely like slapchop has????

[@DaleTrevors]

perfect!

[@josephwilson7745]

That thing looks like a mancubus from doom lol

[@Thereisnogreatersword]

I’m gonna try and fail miserably to add helmet lights to my dark angels

[@onilegends6650]

yes

[@antonbjorsson9890]

did he say Mordor board? Have I missed something here?

[@fleetleader1013]

I don’t get it. Why don’t they sell kits with this in mind from the start

[@benrichardson5662]

LED lights win every time since osl is almost always ridiculously overdone. Unless the mini is supposed to be deep in a space hulk with no lights within a mile, light from stuff like screens simply won't register. Imagine someone looking at their phone while riding the bus. The light on the phone won't show their face, but most people do osl like the model has a flash bang going off in their hands.

[@akumaking1]

Do you guys like OnePageRule?

[@exilelaflamme9184]

I'm surprised with all the spray painting you all do that you don't have a painting booth set up with exhaust fans...

[@TheHairyBeastie]

DAVE -"micro inductive LEDs" no wiring required.

[@pjskenjoyerlol]

Cool

[@spinninglovelies314]

Interesting video. Love this stuff. Wish we could get some more roleplay content! Please😇

[@Rob-qe3cg]

It is spelled solder, but pronounced sawder. I figured we pronounced it that way because of you commonwealth talkers, so it's interesting to see a non-american make the mistake.

[@Illindi]

Murrays was best, others weren't bad but classics are...

[@zhizzleafrizzle8241]

Please try to use a mask when spray painting! Otherwise excellent video just stay safe.

[@mattherto7278]

"you cant paint yellow directly on black" ... im not sure you can paint yellow on yellow

[@BurningQu3stion]

Alpha legion is mid for ultramar

[@kevinford0001]

Ew, Jazz! I'm watching something...

[@ringwraith1040]

I wonder if archvillain games was the sponsor 🤔