LEGO Mac 11 Instructions | Part 1

[@dst9780]

Ok, so I had a little difficultly putting this together and I just wanted to say some things to help anyone who doesn't completely understand what to do, and I know this is long just stay with me. 1. No, the stock IS NOT required for the gun to function, but you still need something at the end to keep it from bending apart. 2. Just something to know if you don't have that many plates, you can make a plate (for the grip) that is that size and it should work (I have a 6x10 with a 6x2) 3. The body (walls) of the gun do not need to use those exact pieces, it will work as long as there are holes on yours where there are holes on Snyzer_tech's. 4. If you want to, this gun is really (kind of) easy to modify! I made a more ergonomic grip and added smooth plates to the top and covered all the things that could be covered. 5. (this is more of a users tip than a builders tip), if you are pulling back the primer thing (all the way), and it automatically goes back to the front of the gun, the guns is jammed. It won't break or anything if you try to pull the trigger it just won't do do anything. What you do to "clear" the jam is just remove the magazine, tilt the front of the gun up, (an ammo brick should fall out), then just put the magazine back in! 6. And finally, if you load all 20 bricks in the magazine, the piece that holds them in will bend ever so slightly back making it really hard to put the magazine in. I hope this helps with building! This is such a cool gun and I love playing with it!! 😃😃😃

[@SnyzerTech]

D St I’m glad to here you modifying this gun and making it better. Keep on building brutha :)

[@lukaficko829]

Galvacasven stop video at the 3.43 and look on the top of stock

[@milanobmx]

i like this

[@ausproto]

Hey Snyzer where do you get your lego from? Also if possible can you make a bricklink xml, cheers.

[@milanobmx]

yeah from where

[@zachdurocher1166]

Took me a couple hours but DEFINITELY worth it. I actually had the right parts to put this thing together and it works great. The instructions were a little unclear at times, but I was able to build the gun anyway. Keep up the great work!

[@zerrpp69]

Nice

[@SnyzerTech]

Snyzer_Tech Presents the LEGO Desert Eagle (Working) Tune in tomorrow @ 4 p.m.!!!! instagram.com/p/BYwPvTWgdVg/?taken-by=snyzer_tech

[@niekje7t]

Awesome!! I was waiting for this tutorial to be uploaded and its finally there :D

[@pattypotato4]

nice carpet

[@JoesLegoGuns]

Great work man. im gonna have to try out these instructions then see how close i came with my gun.

[@davidkumar9216]

Anyone notice the typo in the title?

[@niekje7t]

If you upload part two, i am going to take my bc80 apart snd build this one :D

[@mattlatham8909]

Great gun but it's hard to tell how long some of the tecnic beams are

[@thegtxlego2519]

What kind of rubber bands did you use please reply and if not can someone give me advise

[@janilindberg5055]

2:51 didn't we make that alredy

[@skmrtjr1344]

Where do you get your rubber bands?

[@martinfilatenko547]

will a mac 11 mag fit in your tac 45

[@christiandelgado1564]

This gun is so powerfule I am crying

[@zachdurocher1166]

Update: I have been using this for a few days now. The rubber bands kept breaking in the gun but I found some that seem to hold strong. Also I added some transparent 2x1 bricks to replace some of the side paneling so now you can see how the gun works without taking it apart.

[@boruwakuba]

if you dont have pices you can use mag from BC80

[@triggerhappyfilms9810]

Can you make a short mag tutorial I don't have all the parts to make the mag

[@lewiscullum716]

Parts list please

[@meidlakenejajaanusekene3000]

really cool i will build this if im sure i have all the parts i think it will took me 30 minutes cuz all my parts are sorted

[@jonasheeft1234]

Can you make an ldd file for this

[@timonsvancer1060]

please p90 instuctions please please please please please please please please please please

[@meidlakenejajaanusekene3000]

really good tutorial

[@meidlakenejajaanusekene3000]

thx

[@Wowwowman3000]

1:41 (checkmark)

[@finnijake]

OK i wait for part2 and end it :)

[@finnijake]

when part2?

[@brickguns1]

nice!

[@ethanpaisley7623]

Oh man im taking apart my desert eagle to build this

[@milanobmx]

cool

[@niekje7t]

Part two is on!!!

[@UberCraft9]

Heck yes!!!

[@andrewkobasko1672]

SOOO DAMN CONFUSING WITH THE PARTS SOO HARD TOO SEE I SCREWED UP 27 TIMES ANDS ITS ANNOYING

[@BeronSailerio]

+Andrew Kobasko You can change the speed of the video

[@antonzhakov736]

Beron Sailerio its impossible on the cellphone

[@milanobmx]

i amsoon makeing a video so

[@milanobmx]

sory guys

[@milanobmx]

ha got you im not

[@slowstaeb]

HOOOOWLY SHIT