Lego Technic: 5 Custom Universal Joints

[@biggycheese5751]

the fifth one was originally made by Lego Technic mastery

[@robertdemare6140]

When i saw u use the normal universal joints i was just like: dafuc? Once it was finished i was like thats just an normal universal joint with extra steps lol

[@dinhtuan752]

no thanks for you credit

[@brandonmcdonald6339]

Future video idea: make joint number 5 out of custom universal joints.

[@in1]

:)

[@felixfelix9062]

FRACTAL UNIVERSAL

[@K0wp3R]

That last one is very good because if you replace the actual joints by angled peices you can get a fixed angle

[@wisniamw]

that last one also have linear transfer, so the speed on the outshaft is always same, were with traditional Cardan's shaft you have sinusoidal transfer and the outshaft's speed is constantly changing. Thats why they are almost always used in pairs

[@nicholassookoo3472]

Thanks for these amazing ideas, i’ll be using them in my lego builds since don’t have much universal joints. They are are also surprisingly simple to build.

[@ZanyZ_zzz]

Great video! I’ll have to use these ideas because the real ones are so weak!

[@bobbyfink6121]

I had the same problem with them cracking the splines In half so I ordered 10 steel ones on eBay for $16 and never broke another one since.

[@ChaosNe0]

I like #4 most, because it's so elegant and frictionless and I like #5 for it basically being "don't like universal joints? How about 3?" xD

[@cmtg4471]

Those were pretty insane building technics, wow you ABSOLUTELY amazed me

[@the_atla8]

5, this most useful for suspension with a drive. 3, very good replacement. Thank you

[@KalijahAnderson]

#5 "We heard you like universal joints, so we put universal joints in your universal joint so you can universal joint while you universal joint."

[@gaurikaustubhbhadale6349]

Thanks bro for making this video because I was searching for a rear suspension without universal joint so Thanks a lot for helping

[@Ethanthegrand]

3:52 When you have too much small universal joints

[@Twisted0812]

This is so cool! I dont have enough universal joints now i can make then thanks for the vid!

[@timeandpence321]

Great idea universal joints aren't very common

[@NickBricks123]

Awesome techniques!

[@PotniMuzik]

Thank you for this video!

[@117johnpar]

that one was really interesting and unique

[@Cameragry]

I assume any time a ride breaks at Disney it is because the audio-animatronics are built entirely with the joint at 2:14 haha! Love the channel by the way I am learning so much.

[@The.Boyo.]

Wasn’t 4 and 2 the same? Just 4 was smaller?

[@redpug5042]

#5 is a constant velocity joint, not a universal joint. The difference is that a universal joint has a fluctuating output based on the rotation of the yolk itself, however a constant velocity joint does not have this issue, and the rotational speed of either end remains constant.

[@in1]

You're right, but I didn't wanted to make it too complicated :)

[@tomik1362]

Idea on video: How to build a diferencial.

[@in1]

I actually already did that: kzbin.info/www/bejne/p3uqiIyIeb98ocU

[@tomik1362]

@@in1 Thank you so much

[@qwer32485]

THANK YOU!

[@readlik104]

This is very great👍

[@yanqlegoworks]

Good idea I love it

[@ZYLPHIRYX28]

I only have 1 universal joint so this vid is usefull Next: 5 different custom joints (funny joke if you get it)

[@baonguyen-lm4pg]

wow it so perfect

[@itsnerfordartzone5156]

Wow, thanks. Any small designs?

[@in1]

Not really, but obviously you can still use the original one

[@itsnerfordartzone5156]

@@in1 Thanks

[@YukoFurry]

Last one be like: I used the universal joints to make the universal joints

[@stevenre4250]

Yess

[@reubenkriegel7639]

Had to wait all the way to the end for the constant velocity one.

[@davidsp88]

#3 where did you find rubber bands that small?

[@in1]

I found a box of "loom bands" somewhere, and they turned out to be very useful for Lego

[@huntermentch]

Idea how to build a large heavy duty axle

[@dinhtuan752]

It's sounds like you need technic bricks depending on the length pinned on the ends 2 1x2 brick with axle holes on both.

[@andrebontenbal2661]

When u need a piece but dont have much of Them, and watch this video for hints, thx

[@jackieglade]

cool!

[@ibishucovet4589]

Finally i can make mine human whit movin legs and arms

[@TheGalaxyGamer212]

How does nr 4 not fall apart for you

[@coffi_202kuzmitsky5]

Пятая идея такай типо: у меня нет одного поворотного механизма, надо заменить. Для замены нужно 3 поворотных механизма.

[@QberBear]

Imagine showing an engineer number 3 💀

[@ИванВундеркиндЛЕГО]

Это очень интерестно и уникально!!

[@godg6969]

No. 5 looks the coolest but there is no point of using 3 universal joints to make 1

[@in1]

Theoretically, this is a constant velocity joint, but practically it's the same

[@guk3378]

ty very much

[@vadenummela9353]

Instead of using a u-joint you can use... 3

[@eseopu]

the last one is a cardan shaft

[@яґероніс]

Спасибо большое тебе

[@yonesamiri5295]

Hello, I want to know where you get these tools from

[@in1]

Some old lego technic sets

[@yonesamiri5295]

@@in1 What is its model?

[@in1]

I don't realy know, it's multiple sets

[@yz9551]

make #5 with 3 #5s

[@lukaszek9948]

Youre the best

[@readlik104]

You are a genius!

[@kiashandiworks9331]

anyone notice whichever joint he makes it does not reach the 90 degree angle ?😓

[@in1]

You can modify the last one for that...

[@dinhtuan752]

For example part number 45 pinned by a haft pin.

[@sgthop]

U-joints don't function very well at 90 degrees. No reason to show them there.

[@dinhtuan752]

Ok

[@kiashandiworks9331]

ok @@in1 thank you for the reply 🙂

[@SXCrsd]

me:builds a lego engine him:haha noob

[@РостиславАвдеев-б9р]

wow cool bro cool i even afigel

[@Wreckedftfoxy]

The 5th one didn't count we don't make universal joints from universal joints we would use those instead

[@in1]

shhh :)

[@Wreckedftfoxy]

ok

[@TheSonicdavid]

I don't even own any legos, what am I doing here...

[@Stopmotiondude69]

4:14 we asked you how to make a universal joint WITHOUT a universal joint :(

[@legendarypotato64]

dont like how this persons videos are always so sped up.

[@Keisaii]

1 and 5 are best #changemymind

[@jozherllaranga83]

at no5 u can just use a 1 universal joints

[@djt08031996]

Do you still check messages on this video?

[@in1]

hi (KZbin Studio has a page that lets me check the newest comments from all videos)

[@djt08031996]

@@in1 oh cool. I've been trying to figure out the best way to make a mechanism in a build. Basically, I'm going for a Legacy version of the Nindroid Mech Dragon from the ninjago theme and want to use the sawblades on top of the wings to operate six shot launchers on the fronts of said wings

[@in1]

And what mechanism do you need?

[@djt08031996]

@@in1 I need something that can convert the movement through a right angle. But idk what all can do that

[@in1]

What kind of movement? Rotation?

[@egor.dmit.]

Спасибо давно искал что то на подобие

[@sashawroom6479]

4:34 - у тебя нет такой детали ? Возьми таких 3 и сделав большой кардан !

[@mogusgod5954]

big brain

[@zorgan1807]

You TOP

[@ЭдгарНидерер]

Wow! Вау!

[@infinitelego155]

Stop copying my designs! I uploaded 2 months before you

[@in1]

You're right, the design is similar, but if we had the same thought process it's not that unlikely

[@andrewvinokurow3745]

#2 and #4 similar

[@infinitelego155]

You copied me!

[@santoshdas1472]

So sad that i am the only one to notice this comment in 2 years

[@XxJean_Marie4675xX]

​@@santoshdas1472 not anymore

[@XxJean_Marie4675xX]

​@@santoshdas1472 nuh uh

[@-CookieDev-]

@@santoshdas1472 so sad that im the only one to notice your comment in 2 weeks

[@santoshdas1472]

@@-CookieDev- 😢

[@Inimoha_TV]

Мдаа, так себе варианты

[@АнтонВласов-с2г]

Особенно третий

[@Matveystar7]

5 прикольный

[@BARTENT]

Błaze it

[@deristaderista7737]

Kus kas kus kara kara kukus harkatar harkatar

[@madesand6424]

Adc

[@user-ny7fc1rv2]

Хуета одна, нет ничего лучше кардана! А 5 вообще принцип аксиально-поршневого насоса

[@estebanherbert8820]

Bjr

[@metsaracing2140]

This shit aint joint tutorial!?!?

[@ryanlokensgard1591]

Sorry, but wtf is this???