LEGO Technic vehicle rappels 22 meters down deep chasm cave.

Рет қаралды 14,148

Brick & Gear

Күн бұрын

Пікірлер: 45

@PersonInThatMask 6 ай бұрын

Lego engineering has become insanely good the past few years.

@brickandgear 6 ай бұрын

There's nothing that cannot be done using LEGO. Give me a few years (and a big rocket) and I'll land a LEGO rover on the moon...

@Darknija 3 ай бұрын

@ericplace367 3 ай бұрын

Glad to see that you came back to the same cave with new equipment. Never give up!

@brickandgear 3 ай бұрын

I wouldn't be able to sleep at night if I didn't manage that! 😁

@Yumatzuga 24 күн бұрын

Just awesome! Thank you for sharing.

@brickandgear 24 күн бұрын

Thank you for watching! 🙏😊

@diprosla592 6 ай бұрын

that Cave looks awesome, its definetly a Mission acomplished 😉👍

@brickandgear 6 ай бұрын

Thank you! 🙏 I'm glad you enjoyed it!

@EVP22 6 ай бұрын

Journey to the Centre of the Earth, LEGO Technic style. I am very happy to watch part 2 of this mission, after watching part 1 some number of months ago. Congratulations on the success of your mission! Did you achieve all that you set out to do? Can we expect part 3 of this mission? Did you get any ideas from the comments on part 1, on how to safely descend your vehicle?

@brickandgear 6 ай бұрын

Glad to see you're back to see part two! This mission opens up possibilities for many more projects, as the rappelling system seems to be able to lift a lot of weight (with the right gearbox of course). Definitely expect to see a small vehicle rappelling down a cave, and further exploring using tracks or tires to move around at the bottom. I'll need an FPV system to achieve that though, as I'll have to see where the vehicle is going. The comments always help to further brainstorm on any problem. The comment section actually inspired me to use a retractable cord to measure the depth of the cave and monitor the position of the vehicle to avoid smashing on the bottom at full speed.

@EVP22 6 ай бұрын

@@brickandgear has anyone else explored the cave in recent times? What has prompted you to explore this particular cave?

@brickandgear 6 ай бұрын

@@EVP22 it's very popular among cave climbers for training reasons. Very accessible, with a good total depth and it is 100% mapped. Fun, but grim, fact during the first exploration of the third chamber, two human skeletons were discovered dating from the 1800s. A clear sign that there was another entrance to the third chamber that collapsed when the two humans were inside. I visited the entrance to that cave, as well as many others on that mountain, when I was a student riding my mountain bike. I was always fascinated by deep cave systems, high mountains, and all sorts of exploring so I decided to bring my LEGO into the adventure! Now I need to convince Elon Musk to launch one of my vehicles to the moon...

@generalreak8802 2 ай бұрын

Very nice, great job 👏

@brickandgear 2 ай бұрын

Thank you! 😊

@nikola_104 6 ай бұрын

You could add some wheels on the sides too for better descends and another camera on the other side or at the bottom so you can see where you're going. Looking forward to the part III. with the exploration vehicle :)

@brickandgear 6 ай бұрын

I tried to keep it as light as possible, otherwise it wouldn't be able to climb back up again. I can't wait for part III as well, but I can't do it yet. I'll need to build an FPV system first, as I'll need to see what the vehicle sees down there.

@Ayers-dog-lover 6 ай бұрын

@@brickandgear You could try doing it with a crane to pull it up instead of it pulling itself up also I don’t know if this would work but maybe use multiple cranes that lowers it down and uses and electromagnet to connect to it but it would have to be really strong to do that without disconnecting when hitting stuff and since it seems to mostly be a really wide chasm you could probably make a crane that is stationary but and moves but you would have to get rid of the fencing over it and if it gets stuck you wouldn’t have to push the rope and also since there is probably terrain it would get stuck on I think you should add tracks and a secondary crane that isn’t Lego to pull it out in case of emergency that has a way longer rope and Is connected too the build securely so it can be pulled without the worry of it falling off

@brickandgear 6 ай бұрын

@@Ayers-dog-lover I used a crane during my first attempt. The problem with the crane is building a winch that can handle a huge amount of pressure that builds up as the rope gets wrapped around the winch axle. Wrapping 25 meters of rope stresses the build very much and it's prone to structural failure, as axles tend to bend under the immense load. So, for such a depth, using a belt and rappelling system was much easier. Then comes the rate of descent/ascent. A winch has a much lower rate of descent/ascent and my DJI Anton 2 camera can only record 15 minutes of 2.7K video before overheating and shutting itself down. So, it would probably shut down before it resurfaced. With the rappelling system, the vehicle went down almost 25 meters and back up again in under 5 minutes! Your electromagnet idea is amazing! A fantastic system to lower a small vehicle and release it once it reaches the bottom! I'll have to brainstorm on it!

@CaptianGhosty 6 ай бұрын

Imagine the thing just crashed and you had to make another one to rescue it

@brickandgear 6 ай бұрын

It crashes. I build something to locate it. It succeeds... then crashes. I build something to retrieve both vehicles... It crashes trying... I shut down the channel... 😆

@HateSonneillon 6 ай бұрын

I wanted to see the condition of the vehicle at the end. See if it got badly scratched or anything.

@brickandgear 6 ай бұрын

You can actually see it in the building process part of the video. I shot it after completing the mission. If you look closely you might notice there's dirt on the tires, although I cleaned them up before shooting the video.

@picknikbasket 6 ай бұрын

Very cool!

@brickandgear 6 ай бұрын

Thank you!

@NIGHTvdj 6 ай бұрын

ο κατακορυφος τοιχος στο τελευταιο "σταδιο" της καταβασης και ο βραχος που εμοιαζε με μουσατο προσωπο ηταν το αποκορυφωμα του ταξιδιου! μ'αρεσει επισης δεν βλεπαμε καν τον πατο του χασματος!!

@brickandgear 6 ай бұрын

Φαντάσου και το εξής : Μόλις το όχημα επέστρεψε στην επιφάνεια, αφαίρεσα την action camera και πέρασα όλο το αρχείο της λήψης στο κινητό μου για να δω το αποτέλεσμα. Το πρώτο συναίσθημα ήταν η πλήρης απογοήτευση βλέποντας ότι το μοναδικό που τράβηξε ήταν κοντινό στον τοίχο όσο βάραγε με τα "μούτρα" το όχημα στην σπηλιά. Και ξαφνικά, μετά από 35 δευτερόλεπτα απογοήτευσης, ο θάλαμος ανοίγει και φαίνεται η σπηλιά σε όλο της το μεγαλείο! Υ.Γ. Ο βράχος που είναι σαν πρόσωπο, σε ποιο σημείο φαίνεται;

@NIGHTvdj 6 ай бұрын

@@brickandgear στο 7:17 & 7:31, αλλα μαλλον υπερβαλλω κι εγω, με χαμαιλεοντα μου φερνει περισσοτερο τωρα

@honokami-sama8462 6 ай бұрын

Scary that you can't rotate the camera and have no vision of any obstacle on the ascent.

@brickandgear 6 ай бұрын

I tried to balance the vehicle so that it tilts a bit forward, to protect the camera from smashing on the rocks and help the vehicle to overcome any obstacles during the accent by using the wheels on top. It came back up, so I guess it worked 😁. I would like to build a cheap FPV system in the future though. It's very important to be able to see where the vehicle is going, be it a ship, land vehicle, or anything else.