How to remove hulls from grain. Visit our website to check out our full line of grain mills. www.lehmans.co...
Пікірлер: 93
@scottrossgirvan80097 жыл бұрын
I bought the mill and the rubber - and made the mod. It works....I mean... IT WORKS! Brilliant. Thank you.
@draftwood6 жыл бұрын
Scott Girvan Scott, I'm about to do this. What glue did you use?
@philstat1006 жыл бұрын
Scott & Denise Girvan: Thank You for the information. Did You try it on Rice? Also could You give me any details on what You did? He talked about the glue that he used and some washers. Any help would be very nice. Again Thank You.
@starababa1985 Жыл бұрын
Many thanks to this gentleman for being so generous with his information.
@argentorangeok62246 жыл бұрын
This guy is my hero. I've been fiddling with different designs on CAD but it never occurred to me just mod a cheap mill (NOT my Country Living mill !).
@dherpin48744 жыл бұрын
sometimes we just over think it
@scotts40545 жыл бұрын
I remember Hullin' Oats in the '80s. Maneater, Private Eyes, I Can't Go For That.
@hlegler2 жыл бұрын
This is brilliant! We're planning on growing grain this year, and this video was perfect! So detailed, so well done!!! I think this is the method I'll use for dehulling. :) Thanks for sharing your genius with the rest of us! :)
@kruzoniasworld58973 жыл бұрын
We use this equipment to peel soaked soyabeans. We do this by loosening the knots so it allows the beans go through without crushing it.
@thatguyoverthization11 жыл бұрын
Very interesting and smart man, are we going to see more of his ideas and work?
@drewharrison64332 жыл бұрын
Gene Logsdon described this in one of his books. I wish I could remember which one. It was good to actually see what it looks like though.
@shannon31114 ай бұрын
Thinking about making this. Have been looking for many months for a ready to purchase unit. The only one I’ve found is Grain Maker Homestead Huller Kit for Model No. 99 for $275. You’d need the mill itself for $775. Replacement rubber pads are $47. Website doesn’t say what kinds of grains it works on to dehull.
@Yotaciv2 жыл бұрын
I fashioned a whisk from a foot long piece of 4gauge bare copper grounding wire in my 1/2hp drill press and set the belts to 1780-2200 rpm, 2700 rpm was too much. Beat the hulls off in a bucket with cardboard lid. Then blow the chaff with a 4” 189 cfm exhaust fan. Cleaned up 1.25 gallons of einkorn grain from 100 sq ft. 1/4 of the harvest was hulled seeds and it took three passes, with last pass leaving a bit of flour on the grain.
@lumay3336 жыл бұрын
Great video, thanks. why is the machine not recommended for oats? is it because the oat kernel is to soft?
@anthonymccarthy41646 жыл бұрын
Does it work on sorghum and millet?
@cindiperron6 жыл бұрын
would the gentleman know if this would remove the hulls from einkorn? thank you!
@SahajaRythuWoodpressOils5 жыл бұрын
does this work for safflower and sunflower seeds?? Any other DIY recommendations for the same
@vojtechkundrat49028 ай бұрын
Great machine! Does it work also for buckweat? The hull is extraordinaly hard... could you advice which type should I pick?
@cecilefusco7596 жыл бұрын
Will this work on Emmer? Thank you!
@jessicag6303 ай бұрын
1:18 What brand or type is the grinder? What glue did you use?
@JohnDoe03296 жыл бұрын
That is a good idea. Does this work with buckwheat too?
@argentorangeok62246 жыл бұрын
JohnDoe0329 I don't see why not. You'd really need to use a wider setting as buckwheat kernels are really fragile.
@Jaorde4 жыл бұрын
Does it works for sunflower seeds ? Thanks.
@saucywench91224 жыл бұрын
Will it work on buckwheat?
@mattm50015 жыл бұрын
Would this work with dehulling sunflower seeds ? Thanks for the video.
@felixbali33422 жыл бұрын
Where can I find gum rubber and for what is it used normally. I would really appreciate any input on that. Thank you
@leverman75174 жыл бұрын
I looked for this mill on your website and could not find it
@OWK0002 жыл бұрын
I wonder if it would work on lentils or other beans.
@cristaldavid2604 ай бұрын
Thank You Jesus for this
@urashimatarou95756 ай бұрын
Does it work on buckwheat?
@philstat1006 жыл бұрын
Thank You for the great video and information. Am I correct in assuming that it would work with rice as well? Again Thank You
@JP-nl6lb6 ай бұрын
Did you happen to discover this answer?
@incorectulpolitic2 жыл бұрын
Will this work for ancient grains with more persistent hulls? I'm talking about grains like einkorn, emmer, spelt, etc.
@craigwoodruff5682 Жыл бұрын
What is the thickness of your gum rubber? I bought 3/8" and it looks a lot thicker than yours.
@theozarksjourneytoself-suf5420 Жыл бұрын
Is there a method to get the hulls off buckwheat?
@l.dschick-inn-palacecrafts617411 ай бұрын
Can he please make me one? ❤ Or is there something reliable on market to buy!
@victoriaogunro453710 ай бұрын
very cool thanks for sharing
@donaldappelhof20599 ай бұрын
Maybe spring pressure would be better?
@kimberlawarence50523 жыл бұрын
Where can I buy this dehulling machine
@apronacres72929 жыл бұрын
great - but it would be so much easier if Lehman's or someone sold a de-huller that's ready to go AND works on oats, rice and barley AND for a reasonable cost. Anyone know of such? thanks!
@waltlars36877 жыл бұрын
Galen Lehman I think there might be a market since this is the missing link in the homestead grain production Maybe you could sell this as a accessery to Your grain mill And maybe a pully set to motorized it
@joesears5845 жыл бұрын
I had to import one from India
@mytravls5 жыл бұрын
joe sears would you pls tell where from India? I need one to Hull Millets and try out family recipes but it’s lot of work to use pastel and mortar
@ronallens6204 Жыл бұрын
The disclaimer says it does not work on oats.... wonder why ?
@moneymindshows39392 жыл бұрын
I need one how can I buy ? Any help please? Am into agriculture
@noureddinerbnoureddine9742 Жыл бұрын
Thanks
@red99roses10 жыл бұрын
Will this take the hulls off of barley grain? I noticed it said not for oats so I'm assuming this would not be for barley as well? Thanks
@abdushaheen44992 жыл бұрын
Can I use it on barley?
@paulasutton2222 Жыл бұрын
Does this work with buckwheat? I grew some this year for an experiment and not sure how to proceed. Thank you.
@theozarksjourneytoself-suf5420 Жыл бұрын
I am looking for a way to hull buckwheat as well..... did you ever figure it out?
@taliatut4 жыл бұрын
I cannot find this particular order of gum rubber on that site. Could you please tell me what was the thickness of it? Many thanks.
@raincoast90104 жыл бұрын
Lots of good info in the comments, read the replies. Galen Lehman 3 years ago (edited) UPDATE: 1) In the video, we recommend gluing Grainger part number 1XWZ7, which is 1/6" rubber, to both burrs on the grinding surface. Further testing has shown that using 1XWZ7 on the handle side (stationary) burr and 1XWZ9, which is 1/8" thick rubber, on the moving burr is most effective.2) Food grade versions of the sheets listed above are available. However, we did not purchase or test those versions. If you test this setup with the food grade versions of the rubber pads, please post a comment and let us know how it worked. It looks like you should choose either 1MXC8 or 1TVK8 for the 1/16" sheet and either 1TVK5 or 1MXD3 for the 1/8" sheet. (I'm not sure what the difference is.)The grain mill is available from www.lehmans.com. Search for item number 1079030 or try this link: www.lehmans.com/product/economical-corn-mill
@motleydigger4 жыл бұрын
I might of missed it I apologize if you said but how thick is the rubber
@raincoast90104 жыл бұрын
Galen Lehman 3 years ago (edited) UPDATE: 1) In the video, we recommend gluing Grainger part number 1XWZ7, which is 1/6" rubber, to both burrs on the grinding surface. Further testing has shown that using 1XWZ7 on the handle side (stationary) burr and 1XWZ9, which is 1/8" thick rubber, on the moving burr is most effective.2) Food grade versions of the sheets listed above are available. However, we did not purchase or test those versions. If you test this setup with the food grade versions of the rubber pads, please post a comment and let us know how it worked. It looks like you should choose either 1MXC8 or 1TVK8 for the 1/16" sheet and either 1TVK5 or 1MXD3 for the 1/8" sheet. (I'm not sure what the difference is.)The grain mill is available from www.lehmans.com. Search for item number 1079030 or try this link: www.lehmans.com/product/economical-corn-mill
@SkoolOHardNox Жыл бұрын
How come it doesn't work with oats?
@jennifersvitko59973 жыл бұрын
Does it work for spelt?
@TribalLady125 жыл бұрын
Does this work for rice?
@philstat1006 жыл бұрын
Great information. Do you think that it would work with rice?
@JP-nl6lb6 ай бұрын
Did you happen to discover this answer?
@nickcasper23503 ай бұрын
Doesn't seem to be instock at the moment.
@motleydigger4 жыл бұрын
Which loctite glue did you use? There are several choices. And did you use the 1/16th gum rubber? What size washers
@delgriffith1 Жыл бұрын
If you listen closely you hear him say superglue. Cyanoacrylate
@motleydigger Жыл бұрын
@@delgriffith1 I used lock tight
@Owlmom587 жыл бұрын
Thank you for the input. I have a friend that told me to put the wheat berries on a griddle and heat them up for the hull to come off. I am curious if you can place the seeds in hot water and boil them will the hulls get removed? I can dehydrate them after the fact to dry out the seeds if this is possible. Thanks
@1happycountrymom6776 жыл бұрын
Kathy No, don't do it that way. Won't work .
@niacinberry52 жыл бұрын
Thank you :)
@mahavirsinhparmar78205 жыл бұрын
How i get this machine
@dirtdiver11412 жыл бұрын
Could you use this for wild rice?
@JP-nl6lb6 ай бұрын
Did you happen to discover this answer?
@wendydee30073 жыл бұрын
It says, don't use with oats. I only need to de-hull my oats, so does anyone have any useful information? Thank you :o)
@XinhuoLiang5 жыл бұрын
Look s very good
@kristinbogdonas13696 жыл бұрын
Hi, what kind of glue is best to use?
@hlegler2 жыл бұрын
They said Loctite, which I think is a superglue you can find at a hardware store.
@AnneGoggansQHHT3 жыл бұрын
So y’all need to sell a pair of pads that fits over your grain mill burrs because the life of the mill would be linked to the life of the rubber pads when using this glue method
@nitzsantillan16534 жыл бұрын
does it work in rice grain?
@JP-nl6lb6 ай бұрын
Did you happen to discover this answer?
@thecoppergoat70982 жыл бұрын
Has anyone tried sorghum through this?
@loriraisler82807 жыл бұрын
What about hulling buckwheat? Will this method work? Thank you.
@latimergrocer7 жыл бұрын
I just bought everything and will try it with buckwheat.
@waltlars36877 жыл бұрын
as how did it go ?
@DAPTXDC48696 жыл бұрын
Well?
@borealtribe2536 жыл бұрын
as, - Were you able to remove husks from Buckwheat with this or anything else ???
@stephencoleman35785 жыл бұрын
@@borealtribe253 I used an old corona hand mill, similar to the above. No modifications and cracked the buckwheat. This takes the hull off then the hulls can be winnowed off. I was surprised how easy it was to do.
@judylee18602 жыл бұрын
I’ve got buckwheat
@OffGridInvestor8 жыл бұрын
takes it off wheat? are you for real? wheat has no hulls on it straight out of the harvester! it will fall right out of the stalk with no hull on it. I have been told that rice is the same, and they are the only 2 grains that you don't have to remove a hull from.
@laxerolje8 жыл бұрын
+Link Knight Could it be no hulls because its a hull-less strain?
@scottrossgirvan80097 жыл бұрын
There are varieties that have a hull and when harvesting by hand one must remove the hulls. Some come off during the threshing process but not all.
@lawrencejackson61067 жыл бұрын
Scott Girvan
@cindiperron6 жыл бұрын
would this work for de-hulling einkorn grain? i am very interested in trying to grow it, but wasn't sure how to de-hull it.