Lelit Bianca Review - Is This Espresso Machine Worth It?

[@u_51m56]

I would like a Bianca V3 and what is the difference between V2 and V3, can we find out?

[@el_dani]

V3: digitally controlled pre-infusion and low-infusion, quicker heat up-time

[@deonprins]

Nice combo of machine and grinder! Thanks!

[@azminrs]

Hi. Do you think this machine can manage 100 cups a day for a small cafe?

[@ssejati]

Looking for this answer too…

[@nakulgandhi95]

It’s not meant for commercial use. That’s quite a bit for this machine.

[@flitcroftLA]

You should look at ETL commercial certified machines. La Spaziale Vivaldi II is a similar price point and would work. That one is direct-plumb-only but that's what you'd want in a cafe anyway.

[@KRISTIANFIGUEROA123]

I’m in NJ where’s a good place to find refurb espresso machines?

[@baalouachamine5364]

HI, which screw are you talking about to adjest the pressure : "do a quarter turn on the screw"? thank you

[@raventalla6926]

Is this good for small coffee shop? 50 to 70cups per day?

[@АндрейИванов-б4ж9н]

Thank you for the video! Please tell me which is better Victoria Arduino or Lelit Bianca coffee machine?

[@loganmaltese]

Bianca for more control, VA Prima for more automation

[@jeholloway2]

What is the total heat up time before you can make your 1st cup of espresso?

[@KMSKHALEDKMS]

bianca V3 is about 12.5 mins without steam, or 14~ with steam

[@jeholloway2]

@@KMSKHALEDKMS is that 120 volt or 220 volt?

[@ferris571]

Edit between the steaming and final result takes away significantly from the review

[@luckylarrikin1439]

This is the older model isn't it.

[@Porsche993-j6k]

Where are you located

[@majestycoffee]

NJ

[@MrJusmobile]

Doubled walled may mean less pressure for the rate of steam! It's smaller on the inside!

[@el_dani]

You‘ve got no idea about physics

[@MrJusmobile]

@@el_dani mr. Physics, I got that from the manufacturer while in Italy!!!

[@el_dani]

@@MrJusmobile much more important is the size (or energy reservoir) of the boiler and the design of the injection holes..

[@koxx_hun]

The Bianca is a very good machine. But if you don't use a scale when making it, it's not worth much. :)

[@dr.angerous]

What you mean

[@AdastraRecordings]

Thank christ I managed to remove myself from the great dual boiler diaspora, they're absolute overkill unless you're machine gunning lattes.

[@el_dani]

Because of the big boilers / energy loss? This is one of the main reasons I‘m peering on the Profitec Pro 300 because of the small coffee water boiler..