Cylinder Head Replacement Part 6

[@bobbym4811]

This dudes a og he did the job AND filmed the dam thing too! Respect ✊

[@carzNstuff]

Thanks for this man, I live in Australia and I own a Suzuki with this engine. Always handy to know I can look at a whole series of vids and go step by step.

[@wasptim]

Cheers for posting all this series. Great help!

[@razvan-andrei-popescu528]

thanks a lot brother this is a real help. how did you take off the crank shaft screw after setting tdc?

[@3stagevtec]

Thanks for posting this!

[@MaikoGT96]

The gasket for the spark plugs you change them?

[@ExiledPiasa]

i see they have dished pistons... can you upgrade to flat top or domed? is there room in the chamber? also, i saved an intake cam from a Aero 2.3L, can i use it in my J20a?

[@MrVaro1313]

Hi, how much torque does the cylinder cap put?

[@57mahdian]

Hi, thanks for your useful video. in your schematic bolt number 22 mine overtightened and have been broken. there is no leak but I am a bit curious can I replace this one? or needs machining?

[@sonysan8762]

You have the table toro for is engine j20a ?

[@x0acake]

I'm missing a dowel pin.. could this screw up the alignment of the cylinder head?

[@taboracho621]

Did you use the SAME head bolts or got new ones? Has any one reused the old bolts with good results?

[@luciocastillo55]

alguien de ustedes podría ayudarme? ya le he cambiado el kit de distribución 2 veces y no se le quita el ruido!!

[@eyez20081]

The cams placed into position on the resurfaced head is NOT in the same original position. What is up with that?

[@ignaelpro3382]

este video tiene problemas

[@pinochip]

How did you refinish the surface of the head?