THANK YOU SO MUCH FOR THIS VIDEO!!!!!!!! I have struggled for 2 days with multiple hard wire kits for my Wolfbox Mirror Backup Camera/Dashcam. I watched dozens and dozens of video tutorials on how to install and think it may be a voltage issue with my truck or just user error in working with fuse taps, BECASUE THE UNIT WORKS JUST FINE WHEN I PLUG IN THE CIGARETTE LIGHTER ADAPATER, so for $ 10.00, instead of paying 1 hour of labor at an automotive business (I was done trying to figure out myself and thought I'd pay the hour rate, like 179.00 to have an installer do) this worked perfectly. It would have been a shame too, because I pretty much did all the work, set up ground, had all the equipment routed, etc, to pay someone for something that would take them 5 minutes to figure out. THANK YOU!!!!!!!!!!!!!
@annalmazan90295 жыл бұрын
Ok video. I wish you had actually showed where you found and connected to the fuse box. Because yes some of us are too dumb, so we need EVERY step by step.
@littlemenace93825 жыл бұрын
Find a blank fuse spot, turn key on, get test light thingy and test it etc...
@lordkayx5 жыл бұрын
Fuse boxes are different on every model anyhow so it would not of helped, you have to look up where it is, which is easy on google. and sometimes the fuses are different sizes. and dont EVER call yourself dumb. dumb people dont seek out knowledge, and dont ask questions.
@ronlheureux76234 жыл бұрын
@@lordkayx Be very carful searching out your fuse box on google. There are always several shown that isn't the correct one. compare the results with a look at your car's fuse box. Keep in mind that cars with more modern electronic accessories and features often have more than one fuse box. My 2006 Cadillac CTS has 3 of them. One under the hood and two under the back seat cushion. If you have the owner's manual, this will be shown, along with the location(s).
@lordkayx4 жыл бұрын
@@ronlheureux7623 Very good advice, Im 35 and got my first ride (bronco 1990) in 2000. It , and all my cars since have had one fuse box inside the cabin for the cabin accessories and a second, and as you said even a 3rd, under the hood. For things like engine sensors and not cabin related or controlled stuff. If I am not mistaken, some of those engine fuses can act like a capacitor, which means they can shock you real bad even if the car has been off for a day and the battery is unplugged.
@djxeroic1436 Жыл бұрын
None of the PA system install videos on YT show this step and Im absolutely fuming because that's the only thing I need to know
@kdrapertrucker2 жыл бұрын
Just get an add a circuit adaptor, it plugs into your fuse panel like a fuse holds 2 fuses, one for what was originally in the slot and one for the new circuit.
@MosesMLam Жыл бұрын
simple. to the point. works. 5 years old but still one of the best out there. thanks.
@colombowest5 жыл бұрын
Would like to see the whole process in action including the one you talk about using the not hot side.
@register14303 жыл бұрын
I was going to hard wire it the hard way until I saw this - perfect solution. Great idea.
@grilledchickenwrap3 жыл бұрын
Can you just bust open the accessory plug and just take the red and black cable and tap it to accessory wire ? Bypassing the cigarette socket and plug all together ?
@DaxsDad3 жыл бұрын
Yes
@krisc60123 жыл бұрын
Thank you so much for the concise informative video. Seriously, I've been watching videos for 2 days trying to install a dual 12v power outlet in my 92 toyota pickup. You just made my life so much easier. Im now a sub!
@tobeforgottenisworsethande89952 жыл бұрын
Yeah. I've been watching videos for days. Good thing my Subaru is already falling apart
@singamajigy Жыл бұрын
Does it have the 22re?
@brianfentress62032 жыл бұрын
DUDE! I’ve been searching EVERYWHERE for a solution like this! Thank you!
@Lesscoelectronics2 жыл бұрын
No problem
@soniromanov11 ай бұрын
I'm working on my project car, and I've come to a point where I want to start changing electronics. This is the second video from your channel I've come across with stuff I need in less than hour. Haven't subscribed this fast before.
@babybugspaw70852 жыл бұрын
Great to know.. thank you.. But,, Why wouldn’t want to wire straight to your battery if you have a fuse in between?
@brianchreitzberg2031 Жыл бұрын
Thanks for the video. Quick question. What’s the sleeve you put on the one side of the fuse to extend up? TIA
@austin508 Жыл бұрын
for real. it's such a critical component that he left completely unexplained.
@paddleHI8085 жыл бұрын
Just bought the same mirror n searched KZbin to delete the plug n your video came up. PERFECT! Thanks bradda
@Hellamoody2 жыл бұрын
I've been scouring youtube for a simple explanation like this, thank you!!! No other videos could answer for me where my black/negative wire would go, now I get it's just to be grounded to a car chassis bolt.
@PeterMaddison2483 Жыл бұрын
They both need to go to the battery as, what if you rigged up your homebase to run off a battery instead of mains, you would need to connect both wires to the battery.
@philkingmke7 ай бұрын
Yeah, chassis or the negative terminal on your battery. Either work just fine. Battery is always preferred but most people don't want to run it all the way through the firewall to the battery.
@ericvannatter91144 жыл бұрын
Fantastic easy straight to the point no intro bs no bs during. Awesome
@andiharper44983 ай бұрын
Hi, will connecting to the Accessory power supply operate the Parking and Monitoring Detection on your dashcam? Surely the dashcam will only operate when the ignition is switched on? Regards
@dreamingcodeАй бұрын
I absolutely learned something from this video. I'm new to working on cars and this was super helpful!
@faronsquare4911 Жыл бұрын
Awesome video Sir, just wondering what was the little "chingas" do-hickey, that you put on the fuse and plugged into? Thank you!👍
@Lesscoelectronics Жыл бұрын
thats a fuse tap
@muf Жыл бұрын
What do you call the copper plate/brace that you attached to the fuse?
@Lesscoelectronics Жыл бұрын
that is a fuse tap
@americansmark5 жыл бұрын
Nice idea. I have a dashcam that they dont make a hardwire kit for anymore and I was going to cut the 12v end off and wire it off that, but uaing a cheap 12v splitter is a much better method for preserving the plug. My CB and radar detector are both hardwired in, but not the stupid camera. Been driving me crazy.
@harley1969463 жыл бұрын
I was told not use a fuse tap or add circuit to a existing fuse? This was by an ASE mechanic the wire will get hot....please reply back thx
@abdullahal-shimri30915 жыл бұрын
Great video! I used your video to teach myself how to hardwire interior LEDs for my truck.
@Angel-xe2de2 жыл бұрын
This is the best video I’ve seen in the matter. However from what I know about electrical. There’s no protection in the circuit since you’re only using one side of your fuse. It’s not going through the breakable part. Luckily for my 87 Dakota with crank windows. My power window fuse holder has the female terminal only on ONE side not both. So I can get away with sticking my fuse in the power window switch and putting your little grabber piece on the opposite side without risk of running it towards the battery. Bc there’s no female connector on that side. Thus I’m using the fuse as simply a fuse and not just an Adapter. For those who don’t have this little convenience I would stick a fuse IN LINE of your power side so you don’t cause a fire. I’m no expert but a fuse is just a fundamental. Correct me if I’m wrong I just don’t see a fuse being used to it’s full extent and purpose here. Still a very helpful video so thank you
@koosmyk8558 Жыл бұрын
So...what do you do with the ground wire? Run it to the battery ground or to a ground location near the fuse box?
@bcrobins1 Жыл бұрын
It would be nice if this point was explained!
@billbobaggins76172 жыл бұрын
What happens if you just cut the cigarette lighter part off and just use the hot and ground? What does the connector do
@tennnis4987 ай бұрын
I think he’s trying to sell the sockets…because that makes no sense unless you don’t have enough wire for the length required.
@jamesselback8691 Жыл бұрын
This would work amazing if my car had those style of fuses, ive got an older volvo 240 with cylinder type fuses
@bb-wk3dm3 жыл бұрын
What was that little piece he stuck in the fuse to attach the female adaptor wire to?
@fuckgoogle47123 жыл бұрын
ATO fuse tap.
@malmansoori23842 ай бұрын
MAN!!!!!!! THIS IS SO CLEVER! I LOVE THAT GENIUS!!!!!!!!
@armandocampos85026 ай бұрын
Would i repeat this method if i wanted to hot wire my dash cam so i can utilize the park/motion antitheft system
@secondmanup Жыл бұрын
What is the name of the connector that suddenly appears in his hand that connects to the fuse? That’s where I’m stuck.
@zivnelson-shore8103 Жыл бұрын
Just making sure--that means that the device will still have power, even if the car ignition is off, correct?
@Lesscoelectronics Жыл бұрын
depends on where you connect the power from, it can be either
@fenderstratguy2 жыл бұрын
Totally agree with not using that plug in your cigarette lighter port. As you say, "Who wants to see that thing?" I'd want to hide those wires, like you did. Respect
@michellewilson16577 ай бұрын
"find any accessory circut that works by accessory" I'm lost on that statement. Is that equivalent to 'find the fuse in the fuse box that powers your accessory charger / 12v'? Can I just pick any fuse? Like specifically one that a higher ampage bc Im trying to hardwire power inverter that keeps blowing accessory line (despite being made for 12v)
@viewer23257 ай бұрын
what is the little copper wire you used to extend the fuse called, I have never seen one before. I think that would work for one of my projects. I did look over your eBay and Amazon stores but did not see them.
@viewer23256 ай бұрын
i want to know too
@starlinksrecordsslr9697 Жыл бұрын
Hey, very informative video. What is the name of the pin you hooked on the fuse?
@Lesscoelectronics Жыл бұрын
it is a fuse tap
@ShuffleInMotion Жыл бұрын
How would I hot wire/hard wire a normal wall socket plug into my car? My cigarrete lighter does not work and I cannot get it to work at all. Any input is much appreciated.
@SquawkTradeFX Жыл бұрын
Great video. Do you have a video on how to connect a 3 prong 110v to a 12v battery? I have a water pump for my garden that I’d like to connect to a 12v.
@josh84842 жыл бұрын
will it matter what fuse i use aslong as it has 12v when ACC is turned on? like will it interfere with whatever that fuse is supposed to be doing?
@bluemoon33514 жыл бұрын
Ive watched 100 of these on this subject....this is the best one yet! Thx
@sportsgo22 Жыл бұрын
Where do the the black wire go , that one with a circle ⭕️ ring . Am connecting am led lights on the fuse box ?
@altpath7 ай бұрын
Very useful information. Ive always wondered how they do that.
@mcluvinole9098 Жыл бұрын
Where can those male terminals be found? The one that goes into the female terminal you just crimped? Thanks for the feedback.
@Lesscoelectronics Жыл бұрын
fuse taps are on ebay
@CameronDC-Grimes2 жыл бұрын
Hey man, what's the female fuse connector that you used. I need to get those, have no clue what it's called. You said the other was a terminal connector right. The terminal connector goes to the battery right? Sorry I'm no electrician and just need to install a 12v/USB port to my car which doesn't work. I need a dash cam and a phone charger for GPS
@PeterMaddison2483 Жыл бұрын
I just bought a CB (UK) 'Midland M20' and it already has wires (Plus Fuse) coming from it so we can wire them straight to a car battery no fuss.
@bucky58692 жыл бұрын
I was going to do a flush mount socket on one of the dashboard surfaces but this makes it so it can be concealed completely. I added a flush mount to my work van as a dedicated accessory socket for my power inverter and it works great and looks like it was stock from the factory. I went to do the same for my personal vehicle installing a similar dashcam setup but this makes more sense. Especially since my expedition does not have any surfaces that lends itself to this type of modification. Thanks for the save there. Keep up the good work.
@floridaredneck Жыл бұрын
I want to do this because my dash cam is already there and I could rip out the wire and fish a new cord with a USB instead of the 12V plug is already has, but this would be easier and would free up my 12V plug for USBs converter. I hope they phase out these car charger-style cords. If the "C" connectors work for phones and laptops (and now iPhones), I don't see why they aren't changing these dash cams (and other devices) over also. You don't need the 12V part when you download the contents from my cam, so I shouldn't need one for the car either. I've tested it and it works fine with the USB, but since it's already set up, I'm going with the fuse box alternative.
@FloridaVibes3214 жыл бұрын
What if I want to bypass all the bulky hardware and just extend the wires directly from the product? Also would an inline fuse be better than using the accessory slot?
@jonnnn48953 жыл бұрын
For some reason it didn’t work when I tried that
@dunnbizzy793 жыл бұрын
Was thinking the same thing
@ayeshaasif834311 ай бұрын
This video came infront like miracle. The way you explained 🔥🔥🔥🔥. You are the KING of 12v wires 🫡🫡
@ericb30616 ай бұрын
How do you lay out and set up video cameras for turning signals
@YT-glockstreamer Жыл бұрын
Ok I'm trying to figure out sumthing on my car I recently order some halo lights right for my 2006 dodge charger but my battery is in the back what do I do
@r1se707 Жыл бұрын
Is it possible to hardwire an aux cord to one of the old stereos?
@aceforever0013 жыл бұрын
I bought a 12v harness with a built-in fuse, do I still need to wire into the female end, or would the male end be fine at that point?
@Lesscoelectronics3 жыл бұрын
Hard to envision what youre saying, show me a photo at: sales@lesscoelectronics.com
@joseruvalcaba78244 жыл бұрын
Nice thanks finally found out how to wire in aftermarket lights the right way
@bricktothehead2 жыл бұрын
Thank you for the video. 3:25, Eventhough I watched this part few times IM still unsure of the two metal pieces. Are the two metal pieces included a kit or something?
@Lesscoelectronics Жыл бұрын
thats a fuse tap I used
@clarityofthought9 ай бұрын
I dont understand how you connect it to your car battery though? All im trying to do is install a 12v camper shell fan
@ctbsquad94223 жыл бұрын
Big help watching this video and I’m sure I’ll have to watch it again when I can get back to my project.
@richroc79 ай бұрын
What’s the name of the little copper clip part that you placed over the fuse?
@tomherne71897 ай бұрын
Ivegot a 2007dodge magnum sxt need to get out if my yard no transpounder key need to crank how do i get it to run
@trevey16 Жыл бұрын
Ima add this to my Benz SClass, which fuse am I lookin for in the fuse box?
@Lesscoelectronics Жыл бұрын
Any free accessory circuit, look in your owners manual
@SpekterTP2 жыл бұрын
in 3:07 which you said that it should be used in the side that is not hot, does that mean i should insert it on the negative side on the fuse?
@rondalyon50115 жыл бұрын
Ok so call me ignorant but what do hook ground wire to after u put ring terminal on the ground wire?
@Lmiller2015 жыл бұрын
Any metal that attaches to the chassis
@jamesdrummond3485 жыл бұрын
What is the name of the copper conductor that goes around the fuse? Are they available on Amazon?
@kickflipssavelives4 жыл бұрын
That would be a fuse tap.
@texasknowhow31434 жыл бұрын
Conduct-Tite ATO Fuse Tap
@koalafan15765 ай бұрын
I have my dash cam ran directly to the battery so that when my truck is off it still has power and if someone hits me while park the dash cam comes on and records them. Since I turn my dash cam off when I’m not in the truck it draws no power or very little. Any used power while I’m parked will recharge while driving per the alternator. But to say never ever tie directly or the battery is not true. Many things go directly to the battery.
@brandonstill72292 жыл бұрын
What is the part called that you put on the fuse ? I want to order one. The part that the female terminal goes on. Thanks
@uccoffee11 ай бұрын
what do I have to do with the ground bit ?
@jameslynch36984 жыл бұрын
This guy knows what he is talking about...Finally
@jimwolf37863 жыл бұрын
How would I install this to the reverse lights (at the fuse box, not at the actual reverse light ) of a 2003 Chevy Tahoe for a backup camera so the camera only comes on in reverse?
@JimTMcDaniels14 жыл бұрын
Great video! I'd say be sure to secure the plugs together well so they don't come apart from vibration so I'm putting tape around mine. Also be sure to label the outside that there is a fuse inside the male plug's nose for any future trouble shooting if there is no power!
@tennnis4987 ай бұрын
I wonder why he did not just cut the connectors off altogether and run the wire from there…
@nolimit69984 жыл бұрын
Great. So simple and genius. He’s right. 2020. Everything wants to use your cig lighter. Also want clean look as well.
@Lesscoelectronics4 жыл бұрын
Exactly!
@lruiz3263 жыл бұрын
So I have a 1976 Lincoln and really NEED a backup camera. How do I tap into an OG glass tube fuse?
@peterd.michael66874 жыл бұрын
Great video! I just have a few questions: * Where do you get the fuse taps? (Home Depot does not have them) * My cig lighter was operating off a 15A fuse...should I use a 15? * Does the ground need to be attached anywhere?...Or, is it ok with the metal attachment that you used? Thanks very much for your time. I hope to hear back from you soon! PDM
@scarletstreetmedia18974 жыл бұрын
Ground needs to be attached to a bare metal surface, just having the ring connector on the end is not going to provide ground...
@phcoetzee2 жыл бұрын
I had an almost identical Dashcam and also wanted to hotwire the damn thing so I cutted off that stepdown transformer plug and hotwire the dashcam wires straight to my 12v power supply. It blew the dashcam the moment I switched the ignition on. I had to order another dashcam and wired it properly like you. Its still lasting till this day. Thanks for this informative videos. Subscribed.
@blueridgepics4 жыл бұрын
I just bought three devices that all use the cigarette lighter plug. Can I run the three to the same fuse? What do I need to check for? ...thank you!!!
@ScientistPrepper2 жыл бұрын
thank you. thanks for the point about which end of the fuse to stick the fitting into!
@Lesscoelectronics2 жыл бұрын
Glad it helped!
@rupture67852 жыл бұрын
Where would I put the ground? By any chance is there usually one in the fuse compartment?
@Lesscoelectronics2 жыл бұрын
any of the body's chassis metal will do
@ShipsoftheOceans Жыл бұрын
What area of the ground on the car does it connect to?
@Lesscoelectronics Жыл бұрын
A factory ground bolt is usually best, but if not a clean area of metal of the vehicle chassis will suffice.
@tomcriscuolo2 ай бұрын
Hey which attachment piece did you use to insert into the fuse box
@Lesscoelectronics2 ай бұрын
its a fuse tap
@christuttle20732 жыл бұрын
What was that flat little piece of steel you put on the fuse?
@Lesscoelectronics2 жыл бұрын
that was a fuse tap
@bookieyadigg5 жыл бұрын
how would i go abouts adding a toggle switch to this type of set up. im going to be doing the fiber optic star ceiling. and i only want it on when i flip the switch i dont want it coming on whenever the car gets turned on. thanks. good vid.
@Lesscoelectronics5 жыл бұрын
If you were to do it exactly as I did you can interrupt the red lead on my adapter and place a toggle switch in between there and you got it.
@bookieyadigg5 жыл бұрын
Badass thank you!!
@donovanvasquez58075 жыл бұрын
Why can’t you just cut off the accessory connector on the dash cam and connect that to the fuse? Serious question because I’m doing something similar with a house home wall socket charger for my phone.
@Lesscoelectronics5 жыл бұрын
The reason is because there are often times electronics in the plug connector that are vital to the operation of the accessory. For instance mine has a step down converter that changed the voltage from 12 to 5 volts
@SirWulfrick7 ай бұрын
Ironically I just installed that exact mirror this morning and found this video when searching how to hardwire it.
@kleineegyptenaar2558 Жыл бұрын
Sir what is the name of that mini piece you put on the fuse to conect the female on
@Lesscoelectronics Жыл бұрын
it's a fuse tap
@josealonso6568 Жыл бұрын
Is that brass color metal piece that goes in one leg of the spade fuse have a name?
@johndrennen8342 Жыл бұрын
So is there a reason why you chose to not explain what most would consider to be the most vital part needed for this, ie: the fuse tap???
@Lesscoelectronics Жыл бұрын
I cant remember everything, sorry!
@dustinplee5067 Жыл бұрын
Can I cut the end of a wall strip and put a usb and plug it in to a portable generator
@Lesscoelectronics Жыл бұрын
no. the wall strip is made for 120v ac and the usb is 5v dc
@mrchefmatty19485 жыл бұрын
Could you hard wire it from the original plug?
@rileyheidenthal81995 жыл бұрын
yeah just cut the original wire then you don't need that bulky adapter
@timothywolfe23695 жыл бұрын
Likely not because the bulky adapter has a voltage converter inside
@jonnnn48953 жыл бұрын
@@timothywolfe2369 that is true I hard wired it and it didn’t power on at all when I wired the plug back on it powered on
@hank15275 жыл бұрын
good video. my only question is why keep the cigarette plug for? just cut at the plug and run directly to the power.
@cmill84655 жыл бұрын
3:42
@Kevin23415 жыл бұрын
He makes a valid point about how your accessory may have some power transformation stuff (like a 12V to 5V circuit) inside of it. You don't want to overpower your device or else you're going to release the magic smoke.
@clarkescustomcreations5 жыл бұрын
The only thing in that cig light adapter is a fuse chop the ghastly thing off an put an inline fuse on the power wire
@Kevin23415 жыл бұрын
@@clarkescustomcreations Go take a voltmeter to your cigarette lighter and to bare metal on your car and you're going to see battery voltage. The standard for USB is 5V. I can guarantee you that if you have a cell phone charger in your car that it is not charging your phone with 12-14V. Furthermore, if you feel the adapter and it's warm, that means something is consuming power (something that steps down the voltage in the case of a USB device) which means it's not a passive device with nothing but an adapter and a fuse.
@Cornfed_Off-road2 жыл бұрын
Why not cut the plug off the accessories and eliminate plug connection that is bound to fail and wiggle loose?
@ja75896 жыл бұрын
Can you just cut your original cord before the cigarette plug in, split the hot and ground, and plug the ground into the fuse box like you showed
@markw.46792 жыл бұрын
SIMPLE!!!! Both explained and the solution!!! 🖖🇺🇦🙏
@blascastro45763 жыл бұрын
Ok I got a question. How would I wire it to my trunk and for the light to only switch on when I open the trunk? Or is the switch my only option
@blascastro45763 жыл бұрын
I have a 2001 ford focus zx3
@DaxsDad3 жыл бұрын
It's called a kill switch,or deadmans switch, basically it's a switch that is only on when not bing pressed (kind of like the opposite of a regular switch). Place it in the in between the power source and the light on the red power wire.
@ethanwomack64405 жыл бұрын
Hi I got a question about my cigarette lighter in my car. My car cigarette lighter is always on even tho the car is off, so is there anyway I can change it to only be powered on when the car is just on
@scottforsyth25263 жыл бұрын
Hi. Great idea but.....still relying on the normal 12 volt plug/socket, which I find to be really unreliable. Any other ideas?
@ALWOOD_USA2 жыл бұрын
Cut it off and then connect straight to source.
@mariuspoparascu18224 жыл бұрын
Do you also need a new resistor or is it fine to wire it to to the already existing 12V ACC cable?
@HB-yq8gy4 жыл бұрын
Beautiful thank you great video learn a lot. The cigarette lighter adapters loose their connection & always gotta move around a little to get power. Any way to eliminate this problem?
@mohammedyousufahmed7503 Жыл бұрын
Hi whats the gold thing called that you put over the fuse?
@Lesscoelectronics Жыл бұрын
it's a fuse tap
@flamecrow5 жыл бұрын
How many items can I connect to the same fuse? Say the dash cam, led lights, etc. would that be a problem? Or should I find another fuse to use? There’s so many!
@Lesscoelectronics5 жыл бұрын
it's just math and wire gauges that matter to wire safely. Use Ohms law and kirschoffs voltage law as explained here: www.thoughtco.com/kirchhoffs-laws-for-current-and-voltage-2698910
@joelsch86275 жыл бұрын
ok video..i see where you get the 12volts through an accessory fuse, but where do you get the little jumper you use? you glossed right by that? and where do you put the ground? just find some screw under the dash? help!
@Lesscoelectronics5 жыл бұрын
that part I used is called a fuse tap, theyre at just about any auto parts store's electrical dept. and ground can be any location you find it to be solid and convenient nearby. the shorter the better though..
@mattl6403 жыл бұрын
2:45 what is that adapter called that is in your left hand. The one you slide on the fuse plug
@jasalvatorekestrazzanti27153 жыл бұрын
Micro fuse? Lol sorry I'm not sure
@MatthewLwin4 жыл бұрын
Instead of using the fuse, can I hotwire directly to the cig lighter wire?