Let's have a look at the TGA Breeze S3 & S4 8 MPH Scooter

[@simbasmomma]

Waiting for mine on motorbility coming soon getting excited

[@deniseshephard3347]

I'm also getting mine on motorbility I cant wait to get out and about again

[@dipakdutta1301]

When it available in India.. I need this scooter due to covid-19

[@markwhitfield5412]

I have an S3, a couple of problems, (1) the throttle pot works fine to full, but if u pull it just a bit further, the scooter stops with a fast beep and error code o6. (2) it's a bit temperamental going to reverse at the red switch, sometimes u can select reverse but it still goes forward, if u then release the throttle and go again it will go backwards. (3) it seems there is excessive play in the final drive/axel the scooter will roll about 4" back and forth. even when the key is off, and finally (4) the lockable rear box, won't lock. any clues or help, please.

[@deniseshephard3347]

I have the s4 and if has a few issues their is a 06 which also shows its a major concern for me as I use it more often also the stability isnt allways reliable because I have been tipped up on my side which has damaged my scooter thankfully my insurance has coveres that the lockable storage compartment it does come loose which is another major concern because I could be driving and it comes loose If anyone could give me advice on what to do then please let me kno

[@markwhitfield5412]

as for error 6, I found out by investigation, where the go lever is in the handlebars under the rubber grip, there is a small push button, if you pull the go lever, throttle lever hard, it will push the button and that causes the scooter to stop with an error 6 displayed, stupid thing to have, its meant to be a safety feature, its a pain in the arse, so I removed the rubber grip put a tiny bit of plastic over the hole in the bars and put the rubber grip bk on, problem fixed you could take the centre plastics off, find the wire that goes to that switch and disconnect it from the PCBoard.

[@markwhitfield5412]

@@deniseshephard3347 is it the 4 screws that come loose on your back box? if so get some lock tight, on the screws and put them back in tight, u could use super glue or nail varnish to do the job. if you use super glue, be quick at putting the screws back in one at a time. no rush if u use nail polish or lock tight.

[@deniseshephard3347]

@@markwhitfield5412 thank you so much for the reply its all very well Tga putting safety features on a mobility scooter like ours but its not really convenient is it

[@deniseshephard3347]

@@markwhitfield5412 that I will do as it not worth the risk

[@joseguimorvandeoliveiracos8880]

Bom