let's look at the hpi 5.9 (force .36)

[@johnmadden9754]

Never had a force of any king but I like the rc content in general. I'm into other engines but I'm into anything rc related thanks man great informative video keep them coming 👍

[@CrazyDad226]

Nice video. I ordered me my first LRP Blue ZTec Z.32 for my vintage Losi LST2. Nice vid. Thank you for sharing💯👍🔥

[@Nitro_rc_life]

Yeah it will rip with the lrp I've heard they are monsters

[@SLC_nitro]

Massive motor! Cool bro

[@mojarnugget]

Wondering how it would compare with the famous LRP .32. Great video

[@Nitro_rc_life]

Lrp has way more Grunt

[@hpiedsavageed7608]

That f5.9 is a power house for the savage! But it likes to eat pull starters. Lol😂

[@Nitro_rc_life]

I bet but luckily the new xl comes with rotostart

[@adamformanack318]

Dude anytime you get play or slop in the rod end you need to replace it take a new rod an check to see if it has play cause when it is running those harmonics travel up to piston an sleeve an that not good ok . Also i just rebuilt my savage trans with a full steel gear kit I found on ebay and try to find out about the twin engine set up an show videos. When the savage first come out it was one of the best to get with tons of mods.I put swiss bearing in my .25 with the cooling head an a pico carb with pico tune pipe..😎💯✌

[@islandrc-duke1972]

cool engine and info

[@johnmadden9754]

I do 4 or 5 before the first fire the engine

[@josephsaucedo8691]

it always a good to replace rod pin and bearing on rc engine prolong the life when pinch is still good. rule of thumb.

[@johnmadden9754]

The crank pin play is from a unbalanced crank which will have an effect on your tune. Just in my experience.

[@Nitro_rc_life]

Interesting

[@johnmadden9754]

@@Nitro_rc_life it happens sometimes but the engine will work ok keep an eye on the play because you don't want the rod to let go inside the engine or just order a new crank

[@johnmadden9754]

And I seen it a few times in my lower budget engines in my higher end engines like reds I haven't seen it yet I also run alphas and the nova engines and im a basher and they all work great

[@johnmadden9754]

And don't seal your engine no need and not worth getting rtv inside the engine instead do heat cycles allow the metal to expand and retract and the engine will self seal no need for sealing a engine in my opinion

[@Nitro_rc_life]

If it's a nice cnc block motor I would agree but these cast cheap motors tend to leak especially the force engines at the carb throat. My other force .28 needed to be sealed and runs like a monster

[@troyclayton8659]

Audio is good !lighting suks