Let's Spray - "GHOST PEARLS" using RUSTOLEUM Paint

[@GTsPerformance]

If you're looking for pearls, flakes, or colorshift pigments for your next project, be sure to stop by eyecandypigments.com?sca_ref=6309977.8iGKD4as0o

[@EyeCandyPigments]

This is probably one of the best representation on what ghost pigments are and how they work. Thanks so much for repping. We'll have to do a project together soon.

[@Randymanrockssocks]

You should! this man inspired me to buy so many of your pigments

[@EyeCandyPigments]

@@Randymanrockssocks Thank you for that! 100%. Only if he allows us too. ;) Maybe bring an unreleased color(s)?

[@Multi-Skill-Bill]

He has some fantastic ideas. I would for sure be down to see you guys do a project together!

[@EyeCandyPigments]

@@Multi-Skill-Bill Absolutely! We watch him as a normal follower. ;) A project together would be fun.

[@loudfast1261]

Just adding that I have several of your products on the buy list (Geisha Doll colorshift is first) this month because of this channel.

[@FE428Power]

After 20 plus years of operation on my craftsman 80 gallon compressor, the pump gave out. I was fortunate to find Porter cable Air compressor(which is exactly the same as the craftsman) with a bad motor. Swapped out the pumps and added the tank inline. 160 gallons baby! Thanks for another great video!

[@Slaphappy-_-]

This channel growing! Why? Good content. Lots of knowledge given. Keep going you’ll be on top!!

[@Jack_Ratchet]

Cool effects and the black really shows the difference

[@1bushca]

I just want say how much I appreciate you sharing your work. You are kind and honest. I also have been using Rustoeleum for years. Most of the cars were painted with very same alkyd enamel, Dulux, when I was a teenager. It was a good paint then and affordable. People used to regularly wax their cars to protect the paint. I did. You are showing how new things can be done by everyone using enamel. Great job!

[@michaelm9621]

Man I'm falling in love with your channel. This content is always fresh and new.

[@MR3JOBS]

That's insane 🤯 ...now i want that ghost spatter look WHOOOAAA SO AWESOME GREAT JOB HOMIE 👏👏👏👏👏

[@billhacks]

Nice job. The violet effect is my favorite. Thanks for sharing and thanks to Eye candy for such cool products.

[@Eric-oi3mj]

What about spraying pearl over camouflage basecoat what would the effects be

[@movaughn20]

I used the same clear to spray some Sapporo colorshift, used a Aeropro 1.3. No issues spraying. Will buy again, is was just the cheapest kit on ebay at the time.

[@timgreener4961]

Pretty cool, you should try it with the marbling effect sprays, It comes out like spider or cob webs. I used it as a poor man remodel on my counter tops

[@Ravenseye14]

Keep up the good work. You have shown us to never give up on something you want.

[@Six4691]

Beautiful work! I’d love to see a full vehicle painted like that to see how your vision looks!

[@HOODRAT_RACING]

The white fender… 🔥🔥🔥

[@mikesims6300]

I have never seen that technique before. Looks good.

[@jocelynalaniz3966]

this looks amazing for spray paint!

[@spookyduzit]

Both fenders came out nice

[@Tonytalks1980]

Thanks for doing this video. As always, you did a great job, and your creativity is next level. 👏🏾 🔥

[@coinberg]

The mouse was a nice touch 🐀👌🏽

[@Multi-Skill-Bill]

Lookin sweet man, nice rep as always!

[@jasoncastro7486]

Pretty sweet effect

[@JasonBrown-es5yw]

Try sprayway foaming glass cleaner. U spray it on then paint over it. Also known as "Mike lavalee killer grunge fx" by artool.

[@JoseDiaz-fj6lg]

Thanks it really looks good im doing it on my truck

[@stevedyer2003]

Keep that PVC out of sun light, even if not in direct sun, uv will make it brittle and it will explode, had my shop air with pvc for about 8 years, it does work but I got lucky, same goes for pex, awsome vid!

[@mpikas]

GT, get rid of the swivels, they flow less than the rest of your system, and they can flow less than some spray guns. Also, I'm sure you've heard this before, but seriously, get rid of the PVC, it's not a question of if, it's a question of when will it explode. I have a friend who had a section like that in his garage, bumped it with a broom and it burst hitting him in the face. It destroyed the safety glasses he was wearing at the time and drove them into his cheek. He ended up needing 20-30 stitches in his and some dental work.

[@GlassWerx]

Pretty cool. I was thinking bout doing a bunch of different colors n doing the dish soap trick on my s10 once i get back to it but this js a pretty cool idea too

[@damoncrowfeather4655]

I have a 11.5 hp 220v with a 125 gallon propane tank I converted.. Loads of air!

[@gordosyonke124]

Man bro keep up all the great videos!!

[@sinformant]

That looks awesome!

[@trinkladd]

Just found your channel and subbed. Binge watched all ur vids over weekend. Can u do a flat desert tan. With the black drips. Then do a red or blue color shift. Or u pick the pearl. Be awesome. Thanks bro. Just ideas for ya.

[@jimmygonzales2162]

I have a 2003 Silverado need to paint the front bumper and tank

[@mosesbentancourt7246]

Thinking of painting my car teal bit not sure what color pigment to use any recommendations

[@MaXpeedingRodsCoop]

cool work !

[@joeminton105]

I'm sure you know this but you can "Decant" spray paint and put it in your gun to spray and get a better result that out if the rattle can.

[@GTsPerformance]

I've thought about doing this, but then I think of the mess trying to puncture a pressurized can 😅 I'll try it!

[@joeminton105]

Don't puncture it just spray the paint on the inside of a glass till its empty and let it settle for a few minutes. Then pour it in your gun! 🎉🎉🎉

[@timmiller5170]

how would ghost blue over black with ghost blue over white combination

[@jaysvapes]

Love it bro. Keep it up

[@Stanley8.1Garage]

I haven't not seen you use silver and orange silver and red pearl I like to use that for my ability truck

[@Harlo86]

What's up bro appreciate what you're doing with the tutorials on pigments. Have you looked at the Merlin industrial filter/ regulator from HF? I have one but haven't installed it yet looka like a good filter esp for the price. I also have the current filter setup you have with one more filter inline.

[@jamescasella3943]

That's nice very cool

[@badaxelbrewski]

What color and pearl will you use on the new tank?😄

[@elcodreamin5280]

GT Im trying to tint my speeco 2k highbuild primer. What do you recommend using? I need black. I think I seen you use rustoleum, but wana make sure of compatibility.

[@jimmyjimbo61]

How and where did you get the stencils? Can there be custom stencils made?

[@GTsPerformance]

I used my vinyl cutter to make them. Stencil vinyl is easier to remove than permanent vinyl.

[@TheBigern22]

Ah the infamous mud daubers..they get into everything

[@christopherdlivesey9273]

cool GT's nice

[@impalagus]

😎

[@chriscollins8733]

Try this with a clear/candy black...

[@carlosrivera1252]

Bro what would happen if you spray gold pearls over black

[@GTsPerformance]

That's the next experiment coming!

[@FixthisCD]

need a valve instead of a cap on the bottom of that pipe on the water so you can flush out water. time mark 1:25

[@lssleepers6464]

How long did u let that paint set before u added the decal

[@GTsPerformance]

The lagoon was from a previous experiment, but on the white, I let it sit about 5 minutes before applying the decal.

[@Tonytalks1980]

What machine did you use to get the stencils?

[@GTsPerformance]

I have the cricut Explorer air 2

[@Tonytalks1980]

@@GTsPerformance ok, thanks! I'm going to l9ok into getting one. I'd like to be able to make stencils. Are you opposed to making stencils for sale?

[@GTsPerformance]

@IEatMedia they're great machines! I believe some models can also cut/ engrave wooden boards and cut fabric. My machine can cut up to 12" x 24" max! What did you need? You can send me another dm on insta,

[@Tonytalks1980]

@GTsPerformance I just tried, and it won't let me send another message to you on Insta until you open the 1st one.. it's still in invite mode, you'd have to accept the invitation

[@shannisgeorge]

I like the red better

[@dmonarchdeleon5451]

add a 1 way check valve on the added tank inlet, else it may burn up and stop your other compressor. I did the same thing and had to put a 1 way check valve in to make it work correct

[@GTsPerformance]

I'll keep an eye on that, thanks.

[@lamobazan5105]

@@GTsPerformance hey mr GT I contacted u on instagram about something we talked about at a car show