Let's talk shocks!!!

An honest talk about Ironman 4x4 shocks and why they were designed that way, their benefits, and their ease of use.
For our Video on your suspension's most important tool, Sag/Droop measurement, click below:
• Measuring Sag (downtra...
Topics:
0:00 Intro
0:10 Ironman Shock Basics
2:38 Why Twin Tube?
4:47 Bottom Adjustment Knobs
5:42 Why No Knob?
6:44 Rubber Bushings
9:32 Different Ironman 4x4 Shocks
9:41 Nitrogas GR/GRC Shock
10:02 Nitrogas and Foam Cell Side by Side
10:14 Foam Cell FE/FEC Shock
10:27 Height Adjustable
10:41 What are the Rings for?
10:54 Preload and Sag
11:36 Foam Cell Pro FE/FEC Shock
12:36 3mm Steel Outer Body and Rebuildable
13:10 New but Oily
Don't forget to LIKE and SUBSCRIBE to our channel for more fun videos and technical facts.
IRONMAN 4X4 PHILIPPINES!

[@MAGNESIUMBURN]

Great video clears a lot of stuff when looking into changing the shocks.

[@ironman4x4philippines20]

Just trying to educate the clients to avoid marketing hype. Your investment, no matter what brand, should be worth it.

[@malakomx]

Excellent explanation, the difference with other manufacturers is completely clear. Greetings from Mexico 🏜

[@ironman4x4philippines20]

Thanks so much sir!

[@malakomx]

@@ironman4x4philippines20 With this information, I made the decision to put a complete kit on my KJ Renegade.🦍

[@ironman4x4philippines20]

@@malakomx thanks so much

[@johnwrightoverlandingrobotics]

Great Video. I am considering upgrading my stock struts (Lexus GX460) that have a level kit to obtain my 2.5" lift with Ironman FCPs and medium load springs. I will likely go with the Ironman UCAs too so I can eliminate the 1" wheel spacer I have (front only to eliminate rubbing). I have KDSS and rear springs and shocks are stock with the level kit. Any concern for what I am planning. Ultimately, I would upgrade the rear when needed. GX spends most of the time on pavement, but weekends it does overlanding. Thanks.

[@ironman4x4philippines20]

If you are running Foam Cell Pros you can adjust preload to get 2.5 inches just as long as we can get at least 50mm sag. Probably achievable with the Ironman UCA

[@marccatamio]

6:25 Alright,. That's the answer I'm looking for., thanks 😄

[@ironman4x4philippines20]

Thanks sir

[@lmalesci]

I have a question for you and I would like to know if you can tell me if it is true that the ironman nitro gas shock absorbers go well with the standard original trim and can they be adapted with the +5? i have a suzuki jimny 4x4 with m13a engine 1.3 lt factory standard gasoline yesterday afternoon i picked up the new ironman nitro gas shock absorbers and the 4x4 parts dealer in florence told me that these ironman nitro gas shock absorbers are good for off road 4x4 vehicles with a standard factory shock and springs tuning kit or in a second I could put the springs higher and it becomes a high +5 suspension is this true? Greetings from Florence Italy!

[@sampson7941]

Those look pretty good. Do you have em for 2021 silverado that raise 3=4 inches ?

[@amar.mohamed]

You are awesome dude! I love your videos. So clear and articulate! I have installed the foam cell pro on my Prado 150 and loving it so far. I have the performance springs installed with this. If I decided to go for a full metal bumper (ironman's),will I need to change the springs to constant load? 2nd question: Sometimes when going offroading, I can hear some creaking like similar to bed springs. What could be the cause of this? Control Arms? I have OEM control arms. Do I grease them? If so, what type of grease?

[@ironman4x4philippines20]

Hi sir. Thanks! Just trying our best to explain the products and setup procedures. As fornyour Prado 150, what part number springs were installed in front? Are they the TOY055B or TOY065B? Also as for creaking, check the sway bar to Foam Cell Pro clearance. Let me know how I can help you more.

[@fzner6844]

Is the ring included when purchasing the foamcell shock?

[@junpakaplog69]

Is there anyway to know if my foamcell is damaged aside from oil leak? Like whoosh sound when rocking the vehicle from side to side

[@mattaustria2530]

Great product

[@ironman4x4philippines20]

Thanks sir

[@EWOverland]

Thanks for sharing, I learn alot from this video. I am considering buying Ironmen 12713 GR for Pajero front. I am looking for a confortable ride. Now I have stock Mitsubishi. Can you give your expertise in that issue ? Leaving stock springs

[@mafosa9563]

when are going to get lifted struts for a 2023 nissan frontier?

[@user-gi4tx3kx9n]

What is the difference between the Dobsin and the Foam cell pro ?? which is better

[@youraverageisuzuowner3699]

Is ironman foam cell pro suspension available for the Nissan patrol y62?

[@CalmOwl-yp4dx]

After I watched your video i was bought full set ironman suspension 😂😂

[@ironman4x4philippines20]

Thank you so much sir!

[@MrAndylonger]

Hi I do 90% of the vechile usage for office purpose and planning to have form cell shocks. What do you suggest.? Nitrogas or form cell?

[@angelietubanza272]

Pangarap ko iron man 2013 pa 🔥 Soon bacolod 🙏

[@EJSANIRAF]

What has the softest ride?

[@baymaxisuzu8664]

For isuzu dmax is available and how much the price shock and coil spring

[@ahmadalfadl6503]

I have ironman foam cell pro land cruiser can use it for TOYOTA FJ ?

[@dannytaipe6362]

Hi, well explained topic. Just a brief question: When I should choose foam cell or foam cell pro??? My car is a Nissan Frontier NP300 4x4 2019 and I usually transit 80% city and 20% off road. In the other hand, the original suspension of this car is very soft, using foam cell or foam cell pro shocks will become rigid? thanks again

[@ironman4x4philippines20]

It will not be rigid but controlled. It will still ride good but the sway and uncomtrolled movements will be gone.

[@jongjong9775]

Pang ang foam cell my ara mana pang hilux vigo?

[@angelosarsaba7541]

Great vid sir! Where is your local dealer here in Mindanao?

[@ironman4x4philippines20]

We have a number of Mindanao dealers. Where are you in Mindanao sir?

[@JohnDoe-yh9gi]

Meron po ba for subaru xv lift kit?

[@mikojude6969]

Hi sir, is the o-ring tip I.M foam cell pro fits to fj40 land cruiser? If it is, i will surely buy it. Thank you

[@ironman4x4philippines20]

We can find then proper pros to fit sir. Thats no problem.

[@user-tt8nr3zp7q]

Where is shop located in the Philippines?

[@a3electronics157]

sir saan shop nyo? thanks

[@jamesbryannavarro1825]

Do you have this for Nissan XTerra 2013?

[@angelietubanza272]

i have been dreaming of getting my truck iron manned hehe. but my stock shocks are dead can i put nitrogas on stock height strada 2013? thank you for your wonderfull explanation

[@ironman4x4philippines20]

Yes you can. Just a shock change. No springs, no 2 inch lift maam. Happy Valentines 💚

[@angelietubanza272]

@@ironman4x4philippines20 thank you wanted to find a soft ride but better quality for our strada 2013 thank you

[@neltancio6052]

Nice Vid Sir and im always following your vlogs and subscribe too. Glad to have now in the Phils. BTW i am planning to enhance my Pajero Gen 4 suspension for mild off road. Maybe raise Ht. 25 mm to 50mm. What do you recommend but not to compromise the ride quality other than to improve pa kung maari. Nasa tama lang na tune pero di dapat matagtag. Pede ba yun? One day i will visit your place at Bacolod if you dont have Manila once travel restriction more loosen. Appreciate if you drop a reply.

[@ironman4x4philippines20]

Hi sir, we do have lift kits for the Pajero. My usual setup is B front springs, and either Nitrogas or Foam Cell, the for the rear usually A springs and Nitrogas. It is about 45mm to 50mm in front and 35 to 40mm at the rear, since Filipinos like a more level stance.

[@neltancio6052]

@@ironman4x4philippines20 Hi Sir. Well noted yours. Let me complete the car warranty and do the set up once clear. Appreciated your reply. God bless po.

[@ironman4x4philippines20]

@@neltancio6052 sure sir. Let us know! Thanks in advance!

[@sximavila6415]

Magkano ang iron man set pang ranger 3.2

[@timothyobra4352]

I'm interested in improving my saily driver to Ironman suspension, Which of those shocks can fit my gen 1 strada 96model? Thanks!

[@ironman4x4philippines20]

Yes sir. We have shocks specifically made for your Strada. That is your Ironman 4x4 Philippines advantage. We use specific shocks.

[@timothyobra4352]

@@ironman4x4philippines20 Great! What type is it and I know there's a branch in cavite. May I know also how much? Thanks so much!

[@pitbikejunkie4022]

Proud Foam cell pro user, (hilux revo) masakit sa bulsa but still ganda ng performance. Parang nasa duyan lang..

[@ironman4x4philippines20]

Thanks so much sir!

[@vincentianlaureta8714]

ano po set up nyo sir? may nagsasabi masyado daw matigas sa pavement or unevent pavement. pero may feeling ako baka maling spring ang gamit nung nagsasabi.

[@ironman4x4philippines20]

@@vincentianlaureta8714 maling akala yan sir... or merong ibang stock na gusto ibenta...

[@vincentianlaureta8714]

@@ironman4x4philippines20 probably sir, sir may you recommend shop that install foam cell pro in metro manila or nearby area. thank you po,

[@ironman4x4philippines20]

@@vincentianlaureta8714 yes po. Our office is in QC. Pm me on FB with you number, Pablo Lu Ascoba

[@sonnydizondizon9652]

Saan po ang shop nyo?

[@dharyllerhanjee4316]

Hi sir! May shop ba kayo here in manila? I'm planning to have it in my montero gen 3 4x4 model. I want to maintain yung good ride niya but i want to remove the unstable feel at speeds and maalon ride when loaded. What can you recommend for shocks and coils? User before of TD for my Fortuner and I solid it for the bad suspension ride.

[@ironman4x4philippines20]

Hi sir. Yes we have an office in Manila.

[@YGF00]

Hi sir Pablo question I've ordered already a Foamcell Pro or should I say reserve since supplies will arrive on aug/sep pa daw. Do I need to change my stab link to a extended stab link? Foamcell Pro with coils 65a pero hilux will still be on a stock bumper. Do I need to buy a extended stab link?

[@ironman4x4philippines20]

Anong car po sir. We have stocks now naman.

[@ironman4x4philippines20]

Nope... stablinks are all hype for the front of the hilux. Something you don't need. If you notice Australian companies do not make a stablink for the Hilux.

[@YGF00]

@@ironman4x4philippines20 Foamcell Pro hilux 2021 po. Oh ok thank you! Good thing I didn't bought that

[@ironman4x4philippines20]

@@YGF00 just keeping it real sir.

[@danaustindelacruz7148]

Hi Sir, Im planning to have my Isuzu Dmax 2021 4x2 lifted by 2 inches with better comfort ride, without compromising the payload capacity (1,120kg). What can you recommend sir? Is nitrogas a good choice? Do i need also to change springs? Hope you notice me Sir. Thank you

[@ironman4x4philippines20]

Hi sir. When you lift, a change of coils is always a must when doing it PROPERLY. Nitrogas is good, that is the standard in the industry. Almost all people run nitrogas.

[@jpgabs9173]

I am based in south cotabato, how do I order the nitro and leaf set for my ln106?

[@ironman4x4philippines20]

Hi sir. Send me a pm on FB sir... Pablo Lu Ascoba

[@EJSANIRAF]

I have 2 inch lift on my pajero gen4. Both dobinsons coils and shock. I have no problem with the coils . But the shocks are really stiff. Im planning to change shocks. What do you recommend to makr my ride softer. I want to retain the 2 inch lift rhi. Thanks

[@ironman4x4philippines20]

We dont really know if the coils are stiff or the shocks are stiff actually. But we can try changing the shocks, so we know if it improves.

[@KKK-eb5pd]

Which one you have IMS dobinsons ?

[@jerielmanalo6892]

Sir at 11:00 you said, a lot of shops use the rings to lift the vehicle which is a wrong practice. So you mean to say I can still get better handling in high speed highway situations and comfort in regular city driving just by changing the shocks alone? Most promos by shops says you need to add a leaf because if you put Ironman shocks and coils, the front of the car will automatically lift. So you need to purchase shackles or add a leaf. Is this true?

[@ironman4x4philippines20]

The vehicle will NOT lift by changing the stock shocks to Ironman 4x4 shocks. If you change the shocks alone, you get the same height as the stock setup. Now if you use Ironman 4x4 shocks and Ironman 4x4 coils, you will get about 1 to 2 inches of lift, depending on the vehicle and Ironman 4x4 coilspring part number. Then, you need to use Ironman 4x4s AddALeaf to lift the rear too. Do not use shackles to lift as they simply do NOT work to improve ride.

[@nn.4410]

Hey! I got Foam Cell Pro Stage 2 with 4x Foam Cell Pros, TOY065C front coils, TOY077B leaf springs, greasablr shackles, u bolt kit, propellor shaft shims, poly bushes and all that goodness. I have a Toyota hilux I noticed my front end has gone lower than my back, giving a sort of rake. Is that normal for the suspension to settle? Can anything be done about it? (Ie. Adjusting the front Foam Cell shocks to allow the truck to be level?) Plans for the truck are to have a bullbar in the front, so my dealer here told me to go 065C coils front but maintain 077B leaf springs (not gonna load too much in the rear all the time) Is there some way I can contact you for advice? I got more questions regarding my ironman gear

[@ironman4x4philippines20]

Well, 65C is pretty stiff. I only run 65B on mine and its all geared up, and 77A in the rear with the Canopy and drawer system, as well as a fridge. First thing to realize is the 77B on an empty rear end will be really leading to rake. As for your front end adjustment. Try to do a sag measurement first (link below) and lets discuss your results. kzbin.info/www/bejne/Z2HaoZegpZaYgsk

[@nn.4410]

@@ironman4x4philippines20 thanks for the quick reply! Anywhere else I can chat with you?

[@ironman4x4philippines20]

@@nn.4410 drop me a pm at my fb Pablo Lu Ascoba

[@rennelnapial3999]

Sir i lifted my navara using a levelling kit for the front and changed my rear coils and shocks with ironman. I wanted to change my front shocks to nitrogas para complete na lng ang shocks. Can i still use the front coil spacer so that i dont need to change my front spring to maintain my front 2inch lift?

[@ironman4x4philippines20]

Sad to say you cant sir. The longer travel of the Ironman shocks will make your upper arm bang on the coil upper mount. The Ironman shocks are height adjustable so your request is possible.

[@Tassie1966]

Hi I have a 2017 Dmax space cab hi Rider the factory suspension is worn out looking to upgrade with Iron Man products what suspension would you recommend for front and rear without compromising my ride on the highway please

[@ironman4x4philippines20]

I would go foam cell front, A springs, rear foam cell comfort and AddALEafs or A leaf springs. Do you have a front steel bumper and other accessories?

[@clesterraymundo8911]

Sir for hi lux J with steel bumper of ironman and steel bumper at the back. The nitro gas ironman can bring all the weight of the truck sir? It is true that iron man nitro gas ligted the vehicle 2 inches with out any spacer?

[@ironman4x4philippines20]

Hi sir.. Springs carries the load & lifts the truck not the shocks po. All nitrogas shocks it compatible for 2 inch lift & Needs to pair it with our load rated springs to carry your load + the 2 inch lift..

[@razeelrazak389]

Please can you advise, Hilux 2016 I world like to improve the comfot in the road and off road, Will comfort imprive by repacing nitro or form cell or form cell pro But I dont want to increase the hight of the car Need your kind advise

[@ironman4x4philippines20]

Foam Cell Comfort rear or Foam Cell Pro Comfort. 2016 maybe you need to modify the leafs also.

[@razeelrazak389]

@@ironman4x4philippines20 thank you for the advice, Also I was finding for toyota fortuner 2016, to improve the comfot in mostly road and less off road according to the research I am getting below advice from online so please can you advise if its correct "When looking to improve the comfort of your Toyota Fortuner for mostly on-road driving, replacing the original shock absorbers can indeed make a difference. In terms of the options you mentioned, Ironman Nitro, Foam Cell, and Foam Cell Pro, they all have their unique features and benefits. Ironman Nitro shock absorbers are known for their twin-tube design, providing better control and ride comfort. They offer improved damping characteristics and can enhance your driving experience on paved roads. Foam Cell shock absorbers utilize a cellular foam insert within the shock to prevent aeration, improve heat dissipation, and provide smoother performance. They are particularly suitable for vehicles engaged in demanding off-road activities, as the foam insert reduces the risk of shock fade. Foam Cell Pro shock absorbers are an upgraded version of Foam Cell shocks. They incorporate a larger diameter and stronger piston rod for increased durability and better performance in both on- and off-road conditions. If your priority is primarily on-road comfort and you want to maintain the same height, the Ironman Nitro shock absorbers would be a suitable option. They should enhance the smoothness of your ride without significantly raising the height of the vehicle. However, it's important to note that shock absorbers work in conjunction with other suspension components, such as springs and bushings. Consider the condition of these parts as well, as they can affect ride quality. If they are worn, it might be beneficial to replace them along with the shock absorbers."

[@kyle7588]

Greetings po sir! I have a 2015 Fortuner with KYB New SR shocks which are great for high-speed cornering but they are really stiff. I won't be adding any weight to the car. I want to improve the ride comfort and be able to drive fast on a very, very, very poorly maintained mountainous highway riddled with small rocks and potholes whilst maintaining good cornering. What shock and spring combo can you recommend po? Will getting the 2" lift induce more body roll po due to the higher center of gravity or will the difference be negligible?

[@ironman4x4philippines20]

The body roll and high speed handling is greatly influenced by the spring rate. For the fortuner we have standard height (max 1 inch) lift springs and 2 inch springs. I would suggest pairing them up by with foam cell front and foam cell comfort rear shocks.

[@edramhonda3442]

Hm foamcell pro? 4x4 conquest 2021

[@Chloe-ih9kl]

hi need pb panhard sa fortuner 2017. i have already ironmam nitrogas suspension n spring.

[@ironman4x4philippines20]

No sir. No need at all. I havent installed a panhard on a 2 inch fortuner the last 12 years.

[@brohankh]

Hello sir, what is ironman foamcell comfort part number for toyota fortuner 2022? Mostly for city drive

[@ironman4x4philippines20]

Front is 24730FE and rear is 24743FEC (C is comfort)

[@brohankh]

Thank you, very appreciate

[@ironman4x4philippines20]

@@brohankh anytime sir

[@deep.padayon]

Hi Sir, hm po nitrogas sa inyo for 2012 strada? Thank boss more power po

[@ironman4x4philippines20]

4pcs Nitrogas shocks is 28k

[@kalkalliemostacho8850]

how much are your shock absorbers for navara? can I ask for your price list? tnx

[@ironman4x4philippines20]

Sure you can sir. Drop us a pm at Ironman4x4Philippines fb page or Pablo Lu Ascoba fb

[@philliplehn3600]

hi what’s the extended length and compressed length of the 45852FE from centre of eyelet to eyelet. If you have these specs is it with bump stop compressed on shocks. cheers

[@ironman4x4philippines20]

How do I send you a pm?

[@philliplehn3600]

@@ironman4x4philippines20 Hi. I am not sure how to send personal email address here without it getting into the wrong hands. I just un did the bottom shock mount and extended the 45852FE foam cell pro shock and measured around 670 mm approx. This is about the same or 10mm longer then the rubicon rear shocks on a 2 door JL wrangler.Cheers Phil

[@ironman4x4philippines20]

@@philliplehn3600 the rear shocks work at an angle, so their working length is not 1:1 I think. But to be safe, I will measure. Do you have facebook messenger?

[@philliplehn3600]

@@ironman4x4philippines20 hi . don’t have Active Face book Account . was hacked and closed

[@jonasmemoracion5578]

I recently installed ironman foamcell on my hilux 4x2 revo and it still feels stiff over bumps and on uneven pavement. Non load springs were installed as well as both FE and FEC for the shocks. Does it have a break in period and will it need time to settle in order for me to feel the comfort and performance over potholes and uneven philippine roads?

[@ironman4x4philippines20]

What coils were installed? If you have a 4x2 and it has no bumper or anything, it should be TOY055A with a 10mm ring. Also what was done to the rear? What year model?

[@jonasmemoracion5578]

@@ironman4x4philippines20 TOY055A for the springs and "add a leaf" was only done to the rear. No 10mm ring was installed on the shocks at the front. No steel bumper or under body protection so bone stock toyota hilux revo 2018

[@ironman4x4philippines20]

@@jonasmemoracion5578 send me pics of the setup and who set it up. Will see how we can improve it. My fb is Pablo Lu Ascoba.

[@jonasmemoracion5578]

Alright I have already messaged you Sir pablo. Please check message request.

[@brentonappleby9836]

@jonasmemoracion5578 did you end up getting your suspension fixed? Did you have the normal foam cell or the foam cell pro? I have a Ford Ranger I'm looking at getting Ironman suspension with no load springs in the front, comfort shocks in the rear, and leave the original leaf springs in the rear, but if it is a bit rough I'm a bit worried about that.

[@jerichoaquino524]

Sir good day anong shocks ang marerecomend nyo for toyota fortuner 2018 model more on city driving lng po..

[@ironman4x4philippines20]

Nitrogas okay naman po. Halos lahat naman sa market dito are Nitro shocks. Samahan mo ng coils para mas maganda.

[@Marcus1818]

@@ironman4x4philippines20 hi Sir, magkano po ang suspension package na yun?

[@ironman4x4philippines20]

@@Marcus1818 nitrogas shocks are 28k, coils 20k sir. 48k total

[@mercboy111]

Hi what shocks do you suggest for comfort?

[@ironman4x4philippines20]

What vehicle sir, and setup? What are the accessories installed and what springs are used?

[@mercboy111]

@@ironman4x4philippines20 hello thanks for replying quickly. It’s for a 2020 Fortuner 4x2 V. Current setup is all OE shocks, coils, and struts, and tyres 265/60/18. The current equipment is not plush at all and doesn’t absorb the bumps and road harshness well.

[@philliplehn3600]

Do some Ironman shock absorbers come with internal bump stops? Mine came with external bump stops on the piston shaft. Foam cell pro on JL Jeep Wrangler.

[@ironman4x4philippines20]

Only the Pros come with an extra external stop.

[@philliplehn3600]

@@ironman4x4philippines20 Hi do i need to keep the original bump stops installed above the rear axles as I have been off roading without them . I only carry a small fridge and recovery gear. i’m using the bump stops on the shocks , they are ironman Pros on a 2 door jl wrangler with the light springs.

[@ironman4x4philippines20]

@@philliplehn3600 well you should keep the bumpestops on the axles as they were designed to absorb more shock than your shock absorber mounts. My Jeep runs all the stock bumpstops with Ironman coils and Foam Cell Pros.

[@ironman4x4philippines20]

@@philliplehn3600 Also, the stock bumpstops were designed to stop upward travel to protect your prop shaft, transfercase, and mounts should you accidentally jump your Jeep, in the Philippines we usually accidentally get airborne on bridges and pavement gaps. This kind of impact your shock mounts are simply too weak to handle.

[@philliplehn3600]

@@ironman4x4philippines20 will i still have the same articulation as standard or more with them on at the rear. the front has both on in each corner and they squeeze up with all the weight on the front.

[@baymaxisuzu8664]

Sir any suggestions po mag lift po sna ako 2 inches sa DMAX

[@ironman4x4philippines20]

Yes sir... We have a 3yrs/60000 km WARRANTY Ironman 4x4 Australia SINGLE BRAND promo set for Struts Coil and Leaf Pickups and SUVs❗💚 ✅ Nitrogas kit 40000 ✅ Foam Cell kit 50000 ✅ Foam Cell Pro kit 74000 You get: ✅ 4 pcs shocks ✅ 2 pcs front coilsprings ✅ 2 pcs rear AddALeaf springs ✅ 3 year/60000 kms worldwide warranty ✅ Australian brand with 62 years experience ✅ Australian R&D ✅ sold worldwide ✅ a proper website and aftersales department in Australia ✅ no magic shackles, no spacers ✅ not a rebrand www.ironman4x4.com

[@lanceterencio2029]

Hello sir. Which Ironman shocks would you recommend for Hilux Revo for daily/city driving? Yung mabawasan mo ang tagtag sir. Thanks sir

[@ironman4x4philippines20]

If shocks lang paplitan, either Nitrogas (27k) or foam cell (37k) sir. That is for 4 shocks only. Meron din kami ng full kits po.

[@lanceterencio2029]

@@ironman4x4philippines20 if may kasamang spring sir? May package na po kayo nun diba?

[@vauntace26]

Am also curious for my hilux revo. No lift sana since senior parents and for edsa and osmeña ave. use (ang lala kasi ng lubak and uneven roads). Wondering how comfortable this ironman is compared to other brands.

[@ironman4x4philippines20]

@@vauntace26 what year is the Hilux? If you want stock height the most we can do is replace the shocks. With Ironman 4x4 we can also level it a bit. As for comfort, Ironman is the only manufacturer with comfort specific shocks, and this is engraved on the shock itself, part numher GRC or FEC, for the rear of most vehicles

[@ALHAMOOD100]

Can i ad lc 200 springs on tundra on iron man foam cell pro

[@ironman4x4philippines20]

Yes you can. Do you have the part number of your front shocks?

[@ALHAMOOD100]

@@ironman4x4philippines20 the dealer in qatar doesnt have springs for lc 200 or tundra untill November And some other shops have though dog and king springs i wanted to know the spring rate and coil spring height of iron man shocks for tundra of they match then i can get them I just purchased a iron man foam cell pro set for tundra

[@ironman4x4philippines20]

@@ALHAMOOD100 the spring brands you mentioned do not share spring rates. Only Ironman 4x4 has the spring rates published in the website and catalog.

[@mvshabeer]

Why most of the vehicles don't have option for GRC and FEC? only GR and FE is available.

[@ironman4x4philippines20]

FEC and GRC are usually availble for the rear of most stiff utility vehicles. For the front it might cause a bad roll in the event of a sudden change of direction. What vehicle do you have?

[@mvshabeer]

@@ironman4x4philippines20 NIssan Xterra.

[@karlgraviles7244]

Sir does the foamcell pro have a model for hilux vigo

[@ironman4x4philippines20]

Yes sir. 45710FE front, 45650FEC rear

[@karlgraviles7244]

Thank you sir and another question how many inches is maximum for iron man foamcell and foamcell pro

[@ironman4x4philippines20]

@@karlgraviles7244 2 normally, 2.5 if you run our ProForge UCA. That is with our coilsprings and AddALeaf or leafsprings

[@karlgraviles7244]

another question whats better suspension monotube or twintube and why?

[@ironman4x4philippines20]

@@karlgraviles7244 for 4x4s twintube. They can be dented and still work. No hoses. Nothing to break. Our 4x4s are not rally raid cars or Baja trucks so we need something that will continue working for years.

[@theodietheo179]

Do have iron man shock for hiace grandia

[@ironman4x4philippines20]

Yes yes

[@theodietheo179]

Where I can buy that shock Orion man in the Philippines. My location is in baolod negros OCC.

[@ironman4x4philippines20]

@@theodietheo179 the main store is in Bacolod.

[@ironman4x4philippines20]

@@theodietheo179 Ironman 4x4 Superstore [phone] maps.app.goo.gl/hGxNeFhatkm1xtzJ6

[@GuillemoreGatab]

Bakit walang ironman sa lazada

[@musakiman5584]

How much sir and mayron ka u station dito SA Mindanao

[@ironman4x4philippines20]

What vehicle sir?

[@musakiman5584]

Toyota Hilux Vigo. 3014 gusto upgrade

[@shaunbleiseababon6381]

Pwde po ba sa isuzu dmax 2021?

[@ironman4x4philippines20]

Yes sir. We have specific shocks per vehicle

[@nicambajr25]

HOW MUCH?

[@ironman4x4philippines20]

Which one?

[@roypinto2199]

How much the price

[@ironman4x4philippines20]

What car sir and what shock?

[@roypinto2199]

Nitrogen sir how much shock

[@roypinto2199]

Fortuner 2014 how much price shock pede rin ba yan sa higway long drive hindi ba delikado and adjustable rin ba yan sir

[@ironman4x4philippines20]

@@roypinto2199 shocks only Nitro is 27k po sir, coils are 20k. So 47 lahat po. Pwedeng pwede sa highway. Height adjustable po.

[@roypinto2199]

Saan ba yang store nyo at libre ba yang pagpapakabit ng shock at coils at meron din ba kayong mga tires tulad ng nitto tires pede bang 275 by 70 size ng gulong at may discount pa ba yang shock at coils nya

[@jakeruiz5062]

Let's talk shocks with our mask on. 😷 lol... take that thing off man. Let me see you and the shock baby.

[@ironman4x4philippines20]

Hehehehe. I think this was the height of quarantine or something. Thanks man!

[@RR-cg2rq]

Hello sir. Talaga po bang nasa 15mm lift lang ang Ironman suspension kit para sa 2022 Montero 2.4L GLX M/T 4x2? Yun po kasi ang nakalagay sa website ng Ironman 4x4 para sa MITS040B front coil springs and MITS042A rear coil springs or mas mataas po kapag sa Montero 4x2 linagay? I'm looking for a 30mm lift all around po kasi.

[@ironman4x4philippines20]

The advertised estimated lift is at the load indicated on the website. 30mm is easy if installed right. I would also use A in front if your 4x2 doesnt have a metal bumper.

[@RR-cg2rq]

@@ironman4x4philippines20 so what springs would I need in order to get a 30mm lift all around?

[@ironman4x4philippines20]

@@RR-cg2rq will you use Ironman shocks as well?

[@RR-cg2rq]

@@ironman4x4philippines20 yes sir. I plan on using Ironman Nitro Gas

[@ironman4x4philippines20]

@@RR-cg2rq we can run MITS040A spring with a 10mm preload spacer.