As far as the air tag, i've heard someone suggest taking off one of the corner panels and placing it behind, then reinstalling. There was also someone that 3d printed a mount you can screw in to the top, inside, of the lidded boxes.
@R1CK_54NCH3Z4 ай бұрын
Weihe designs has a well thought out lock mechanism for the draws. It can allow you to lock all draws or individual ones so your laser draw can be locked all day when not needed but still allowing access to the other draws.
@drewspencer976921 күн бұрын
Drill a hole through the inside the drawers and top that line up. Put a rod through them. Strap case on top. Lock all the drawers. Like metal tool chest
@firewoodsteel4 ай бұрын
For me it has to be rain tight. Our tools go in the bed of the truck. Milwaukee also has metal rings to attach chains to.
@mattwoods63673 ай бұрын
I seen somewhere else you can undo the faster in the middle of the wooden top and slide it for “hidden storage” you could put your air tag in there
@drewgoins142 сағат бұрын
That bottom drawer on the right side of the drawer sits right over the stacktech interlocking system. I don’t know why they didn’t make dividers for it but that’s why there’s a bulge there
@R1CK_54NCH3Z4 ай бұрын
I modified that pouch using the thin, soft plastic of a large ice cream container, heated and folded over the big pocket deviders with hot glue in the fold of the plastic to hold it in the pockets, this helped with sliding tools in and out faster. The electric vessel fits nicely and I also hot glued the bottom of the tape holder closed so I could be sure that my extra 50mm bit for the vessel driver didn't go to deep in or fall out the bottom for quick assess to change bits.
@mattboxwell75064 ай бұрын
The bottom drawer on the 3 drawer has a recess for the locking mechanism. But don’t know why they didn’t have dividers for that side still. Looks like you need to make a stacktech to packout mounting adaptor to use the slide in the car.
@AddictedtoTools4 ай бұрын
Yeah I’m would have liked them to still make some dividers to suit. An adapter plate will surely come out. I would love to make one but it depends on time. I’m sure people are already working on it
@enhancehomeimprovementstoo18024 ай бұрын
The top cutting board holders screws as well. Just remove the middle screw and slide off for more storage.
@KevinOsborne19874 ай бұрын
So jealous! Need this in the UK urgently! Toughbuilt are taking so long to bring it out!!
@bryanhughes37514 ай бұрын
I believe they have a contact with Lowe's to be their only supplier for the first like 6 months of 2024. So hopefully soon that can start selling elsewhere!
@FaBs2274 ай бұрын
Bro we need you to do a review of the Hilti set, Bosch set, AEG Set and Makita you are running. Good to see you’re making a comeback.
@AddictedtoTools4 ай бұрын
Cheers mate. I’ll definitely have to do something with a lot of the new gear. I’m hoping to push more KZbin content in the coming months
@danielbown37862 ай бұрын
There is a parts organiser underneath the worktop when you remove the screw.
@thekiwinomad4 ай бұрын
Great video will be interesting to see how it goes day to day vs the ease of the packout system
@GUTT3RZ4 ай бұрын
Milwaukee Racking shelf fits nicely on that Toughbuilt work top if anyone didnt want to use cleats. It doesnt look funky either.
@oliverseamus41332 ай бұрын
Stacktech bamboo top comes off. Perfect place for air tag.
@azzza284 ай бұрын
Hey mate, love the effort you go to in your videos. Keep it up! Have you see the aeg quickstack 2.0? They gave just come out with drawers and interchangeable wheels so you can have a roller box or roller drawers.
@AddictedtoTools4 ай бұрын
Cheers mate. Yeah I have looked a few times and haven’t found the drawer roller yet. When do I’m grabbing it for a review. Looks good
@azzza284 ай бұрын
yeah, so they sell the roller box and the drawers seperately. They don't sell drawers with wheel assembly. But the quick release wheel assembly is clips off the roller box and clips on the drawers.
@blakeangel88314 ай бұрын
Love the stacktech but have noticed the bottom wheels box isn't completely water proof
@rokdee22294 ай бұрын
I think milwaukee is superior on the tool boxes but tough built absolutely nailed the tool pouches...
@hanswein30202 ай бұрын
So I've owned them for a while. I'm not very impressed with of the features they completley missed, so #1 the tops fill with water and are basically a small sink. #2 if boxes get wet at all and it then gets cold you can't open or separate any of them. #they spill water in the boxes if you open them to fast it fills your box.#4 the lid and hinge mechanism do not align well and it often takes 2 hands to shut and fiddle with it. #4 drawers do not lock
@TheN00bWarriorАй бұрын
Really extied to see your long term use thoughts, wat to many empty setup videos
@neilwelsford35783 ай бұрын
How has the dolly go getting around site? I would prefer the trolley but don’t want the box on the bottom like you. I would need to sometimes take the stack out to the van which could be parked quite a distance away. Not sure the dolly could handle that. Thoughts?
@R1CK_54NCH3Z4 ай бұрын
You can leave the large tool box latch open all day and m lock it at night.
@highroller88774 ай бұрын
Looks like once you got that screw box/organiser on top you don’t got much room to get a lock through.
@ianclifford314 ай бұрын
Do many Australians pick up on the reference to your shirt ?
@dylanevanssa4 ай бұрын
I get why you’ve done it but if it ain’t broke, don’t replace with a less functional set up 😏 you paid for that gear to get imported from the states too right? I love getting new tools but not as much as you 😂 I do enjoy your content. Cheers
@NiGhTxStrick4 ай бұрын
They have a 4 draw set don’t they?
@TheRealPatrickStarOfficial4 ай бұрын
Are we going to see your video on the Kincrome powertool range anytime soon? 👀
@AddictedtoTools4 ай бұрын
Was hoping to get it done this weekend but had some setbacks. So should be soon
@TheRealPatrickStarOfficial4 ай бұрын
@@AddictedtoTools excited to see what you think. Their hand tools have only been getting better and better over the years 👍🏻
@James-dx9ho4 ай бұрын
@@TheRealPatrickStarOfficial it’s just going to be white labeled stuff though. What’s the point
@TheRealPatrickStarOfficial4 ай бұрын
@James-dx9ho I don't understand what you mean? I think Kincrome were developing this range themselves.
@James-dx9ho4 ай бұрын
@@TheRealPatrickStarOfficial highly doubtful. All their stuff is made overseas
@briansmith29244 ай бұрын
I totally agree their no way to lock the drawers especially when you are driving around corners they just open themselves right up.
@stephentoby87504 ай бұрын
The locking function isn’t a big deal in my eyes . You can cut that off in seconds 😂😂 packout or stacktech
@syrus12334 ай бұрын
For insurance purposes you need a lock otherwise insurance won’t cover you. Also it’s extra deterrent because some people on site might want to be discreet and grab something from inside so you won’t notice straight away. People on site don’t wanna break something to steal it because they would get caught
@MightyHawx4 ай бұрын
So both packout and stacktech have your long dividers that go front to back, then the short ones that go in between. Why is there only 2 slots for the short ones? Why not have say 6? Its like they just copied packout without thinking of a better idea
@adamnader38804 ай бұрын
Where are each manufactured? It should be told.
@James-dx9ho4 ай бұрын
China
@tomsmith17584 ай бұрын
is the draw thingy not there because the looking system is under the bottom right side
@AddictedtoTools4 ай бұрын
Yeah it’s most likely because of something underneath
@tama35914 ай бұрын
Mate how do you store your conduit bits?
@AddictedtoTools4 ай бұрын
Depends. We have storage cages on each level we work on and then I’ll what I need in the packout/stacktech.
@mmcfly8674 ай бұрын
Seems like every step of the way you're having to compromise
@AddictedtoTools4 ай бұрын
Hey mate. What do you mean?
@mmcfly8674 ай бұрын
@AddictedtoTools you have to find a work around for the lock, find a work around for the lid, find a work around for the drawers and some other small things. All stuff that is already sorted on the packout.
@mmcfly8674 ай бұрын
Anyway, hope it works out.
@AddictedtoTools4 ай бұрын
@mmcfly867 yeah there’s definitely a few things I wished they did differently.
@AddictedtoTools4 ай бұрын
@mmcfly867 it’s been good on site so far. Haven’t had any worries and it’s been a good setup. Biggest thing for myself at the moment is the lock for the drawers
@jameschristian5976Ай бұрын
Skibidy toliet🤫🤔
@JayHen-ut2wj4 ай бұрын
The locking system being open and in the front is a bad design. Wait till dust and debris gets caught in there and you can’t work the slide lock.
@AddictedtoTools4 ай бұрын
Have you seen any problems with the packout lock? As it is similar. I go over that in the video
@Whosurdaddy714 ай бұрын
Hellova downgrade mate. 😂Lock holes don’t have metal and half of them can’t lock anyways. Smaller boxes. Too many cons. Yeah pull out the dividers and throw Milwaukee trays in it. Useless boxes
@misterzerozero3444 ай бұрын
You throw everything away as well and get your self a motorised wheeling cart don't understand why all you trades still building like the cave men we are well off in to the future now
@James-dx9ho4 ай бұрын
Toughbuilt will be bankrupt in 18 months
@AddictedtoTools4 ай бұрын
Whys that?
@James-dx9ho4 ай бұрын
@@AddictedtoTools company is in massive financial distress, hanging on by a thread, burning cash like crazy, suppliers yet to be paid after 9 months
@MattHmm-rq6dn4 ай бұрын
He's not wrong financially there doing poorly. Lowes is slowly dumping them in the states there clearancing out stacktech at my local stores. There are products like the 5 in 1 electrican utility knife I haven't gotten may hands on in almost a year and if I really have to have it ebay is my only choice. Stuff like that isn't just in my area relatives on the other side of rhe country see the same thing. Packout user because it will be here for a long long time. Sometimes reliability wins regardless if there may be a better product out there.