Level Your Truck The Right Way | Carli Suspension 2014+ Leveling Kit

[@abellopez2711]

I have a 2019 ram 2500. I would love to run 37s with this level kit. I heard that 2019 spacing got a little smaller then previous models. Do you have a suggestion on what type of wheel I should be looking into for no rubbing issues?

[@CJCOffRoad]

It's the same as any of the older trucks! To fit 37s on a Ram truck we recommend a +12 to +27 offset wheel that is no wider than 9.5.”

[@giathomas745]

I love trucks

[@ewxlt]

Looks great. Thanks for the solid work, gentlemen.

[@modestoflores3903]

Quick question here...So besides this kit...its recomended you upgrade your upper control arms?

[@CJCOffRoad]

These 14+ trucks have Radius arms. On the older 94-12 trucks with control arms, you do need to upgrade the arms to fit a 37” tire.

[@crazyhass84]

Dang it! Before and after videos!!! I would buy one instantly if u started doing this.

[@CJCOffRoad]

it's on the to do list for every system. We're working on it!

[@JT-dn4bi]

What about a 14 2500 ram with a 5.7 hemi I would love this on my truck mine has no flexibility at all it will lift the tires off the ground in a drive way rout

[@CJCOffRoad]

Yep this kit will work! We also recommend the torsion sway bar to help with situations like you’re describing.

[@JT-dn4bi]

How much would they run both together

[@travic2087]

Would a carli leveling kit run 37x13.5r17? What would the offset have to be? And would you have to do any trimming?

[@CJCOffRoad]

It will fit with whees that are 8.5 to 9” wide with +18 to +25 offset and a little trimming. Check out our other videos covering trimming and wheels that come in those specs!

[@travic2087]

@@CJCOffRoad ok thank you!

[@SILVARK1]

What is the height of this leveled truck with 35s front an Back?

[@elstonfrank]

I have a 2017 Ram 2500, I have the 2” spacer on front, would I notice a big difference if I get the carli torsion sway bar? I’m running 18” wheels & 285/75/18 Toyo tires. I like the look but I wanting a smoother ride. Should I have got the longer front coils instead of spacer? Thanks for any and all help.

[@CJCOffRoad]

The torsion sway bar helps with situations where the left and right sides of your axle need to move independently, like going at a 45 degree angle into a driveway. That will really help, but removing that coil spacer and doing something like the Carli or Thuren leveling kits where there is a well designed coil and custom tuned shock will make a big difference! We definitely recommend that route.

[@elstonfrank]

CJC Off Road I have new 5100 bilstein on there, so replace spacer to longer carli coils and carli torsion sway bar and that would help big?

[@01tangodown]

How would this set up handle on forest service roads and trails?

[@CJCOffRoad]

Very well. The ride is improved over factory, and much better than any spacer style leveling kit.

[@01tangodown]

Do you guys recommend the radius arm drops with this kit?

[@CJCOffRoad]

They aren’t necessary but can be added on to maintain factory geometry. If customers can swing it, we usually like to suggest adding them.

[@krissawyer1098]

I am looking at the Carli leveling kit for my 2019 2500 ram. What would be a good wheel offset/backspacing to run 35x12.5 R20?

[@CJCOffRoad]

Anything from 0 to +25 will work fine!

[@GTOAviator]

How much would the total height of the truck go up (at the highest point) with this Carli 2.5" leveling kit and some 35s? I'm working with slim margins in my garage :)

[@CJCOffRoad]

Basically assume a 2.5" height increase at the roof with the level, plus the tire size increase. For example, moving to a 35" from a 34" tire will lift your roof height a little less than .5 inches.

[@DarrenMoore71]

Where are the Ford trucks at? :-). I only see RAM on the videos.

[@CJCOffRoad]

We’ve got a good mix of both!

[@zackaryrakisits9352]

Would 35x12.50 fit on the stock wheels with this kit? I have a 19 3500 and don't want to change the wheels really.

[@CJCOffRoad]

Yes that combination will fit on the stock wheels.

[@zackaryrakisits9352]

@@CJCOffRoad thanks I almost think they might fit without a lift on my 19, it seems like I have more room then my 2016 ram 2500 had.

[@CJCOffRoad]

as long as you don't go for a crazy offset and backspace, there should be zero rub with a 35. We have a great tech article on our website that details everything to do with wheel and tire fitment for these trucks!

[@ricardonino6029]

I got this kit but seems to be logo is printed wrong because the way they go is upside down

[@cristobalospina620]

Will this work for a DRW 16 with factory airbags

[@sonnyharrison7338]

What is the long term durability? I run trash County and oilfield roads. Almost like light trail rides 10 hours a day. I tried icons and 4 spherical bearings and a strut broke above the lower control arm. It’s was on a 1/2 ton Chevy but thinking about moving to a ram to see if we have better luck. Looking for options to make the ride better.

[@CJCOffRoad]

For you I think a Ram 2500/3500 would make an excellent candidate. Pair it with the Pintop leveling system and you'll be able to move quickly down those roads with parts that are going to last.

[@getpower1]

Anyone catch what size wheels and tires the guy went with?

[@CJCOffRoad]

This truck is on 35/12.5/17 tires!

[@redtitan29]

@@CJCOffRoad What is the offset?

[@cliffsimms8520]

Does this same setup work for the 3500 dually?

[@CJCOffRoad]

Hi Cliff, yes Carli has this system for the 13+ 3500 trucks!