Lexia 3 Nec "Full chip" vs Lexia 3 Fujitsu

[@Jay-bx4bw]

exactly the information I was looking for, no need to apologize mate your english was perfectly clear and understandable, great work!!

[@Loftikaz]

is the new one working with 2016 picasso 1.6 hdi blue?

[@aunomdedieuletresmisericor9772]

Full chip , i think means moduls simulator, when i tell moduls i mean a modul is an electronic part of the car which drive a car active part (accelerator, doors lock ect) . The full chip has more electronic elements (open them " the full chip" and "the other one" you'll see the first is more complete). You've optocouplers and 12 relais which generate tensions needed to command car active parts .

[@MsRoBass]

Full cip means full equipped with all OEM chips. Both models are half chip, not full. Typical 40,-€ versions. Upgrade to DiagBox >7.52 is mostly not working with those fakes.

[@MsRoBass]

Exactly those versions are both (!) NOT full chip models. On the IC Platine only 2 couplers visible - the major indicator for a cheap Chinese copy. The limited number of couplers makes the system instable. Mainly the EEPROM has also only limited Firmware upgrade capability. works for smaller jobs but not for newer cars or Diesel actuators.

[@MsRoBass]

Here to learn the background: obd2-diag.blogspot.com/2016/12/how-to-choose-good-lexia-3-clone-for.html?m=1

[@kvalitetnikvazimodo9093]

yea i see what u mean at 5:58, board on left has 1 and board on right has only two, so I guess they are low quality clones

[@batuhansengunlu4268]

Hello, is it compatible with the 2001 model 206 GTI?

[@EFreddy]

Yes it is! :)

[@SpringWaterPaul]

is it woth off buying that new versio that u can see on Aliexpress? I mean the lime green looking "new Aer lexia 3" with diagbox 9.68 for 80$ or regular one with older diagbox for 50$

[@SpringWaterPaul]

​ @E Freddy

[@EFreddy]

@@SpringWaterPaul I can't answer that question i'm afraid. The one with the newer logo in the video however is really reliable. Seems like I need to do a new video about that one ;)

[@SpringWaterPaul]

@@EFreddy can you link me that one? Is it on aliexpress

[@EFreddy]

@@SpringWaterPaul Here is the right one :) www.ebay.com/itm/Citroen-Peugeot-Diagnostic-Interface-LEXIA-3-with-DIAGBOX-9-68/113376834491?hash=item1a65c933bb:g:wakAAOSwLUReqek7

[@מחלקהטכניתפרופשיונלמוטורס1]

hello dear and thank you. i have the new model full chip and have problem i can find the VIN , you know what is the problam on pcb?

[@jdomingo91]

wich is the last version of disgnox supported in the nec fullchip one?

[@yhshah21]

I have the old chip one and my car is 2015 208 it will not let me do any manual configuration (seatbelt chime removal) I used diagbox 9.68 is this because of the old cable?

[@badrijan9704]

I think that's the Lite versions, not the Full chip. am I right ?

[@heavoc9793]

These two Lexia interfaces are of poor quality, because neither of these has the mandatory 7 optocouplers on the computer side card 🤔 The 7 optocouplers are needed to allow the communication with ALL vehicle ECUs

[@thomasmezei3231]

hi there! Could you then let us know which ones we should be considering with those "7 optocouplers"? Would be really useful to know. Thank you!

[@pozyczhtc]

@@thomasmezei3231 at 8:31 you can see one white optocouplers (above the ABCD lettering) at 8:47 you can see 2 white optocouplers, but there are 7 soldering points. i hope i helped.

[@TheSnoopdog14]

HELLO , can u please EXPLAIN FEW things : IS LEXIA BOTH FOR PEUGEOT AND CITROEN OR only for CITROEN ? IS PP2000 only for PEUGEOT ? DOES DIAGBOX INCLUDE BOTH pp2000 and LEXIA IN IT ? thanks

[@EFreddy]

The unit itself is for both Citroen and Peugeot. When you buy a unit like the ones in the video a copy of diagbox and pp2000 is included. 😊

[@TheSnoopdog14]

@@EFreddy thank you for your reply . Still , it doesn't answer my questions . What is Lexia ? Isn't pp2000 supposed to be included in diagbox itself ? If not , what is diagbox part for ( peugeot or Citroen ) ? What is pp200 for ( peugeot or citroen )? What is Lexia for ( peugeot or citroen )? Pardon me , I don't know how to ask this any simpler .

[@EFreddy]

@@TheSnoopdog14 What is Lexia: Lexia is the unit itself. What is pp2000: It is an embedded program in Diagbox that works for older Peugeot. It was commonly called "Peugeot Planet" before. If you are working on let's say a Peugeot 307, diagbox will detect the car and start pp2000 for you. :) Diagbox as a program in short is used for both Citroen and Peugeot. It work for EV as well. Lexia works for both makes as well.

[@TheSnoopdog14]

@@EFreddy so if my first intension of use is to work with diagbox on 2004 peugeot 307 ( which is specifically the car I need to work on ) , then installing diagbox by itself will include pp2000 if I understand u correctly ?

[@TheSnoopdog14]

@@EFreddy and what is EV ?

[@Maisonier]

So this are the available on aliexpress and chinese webs?

[@EFreddy]

Yes that´s correct!

[@amsterdamrico]

what would you define as nieuwer model car. I have a 308 from 2010

[@EFreddy]

The full chip version will work great for that car. 😊

[@toolsmeca7004]

The best in fujitsu and Nec ???

[@hunter406v6]

Those are not fullchip ones... these are lites.

[@Andy_83_SWE]

Tjena Kan du länka till någon bra enhet som du vet funkar till 307 HDI? Tex den som teknikproffset säljer, är den något att ha? Mvh André

[@Andy_83_SWE]

Är den "nya" 307 HDI förresten, 2008 alltså med obd uttaget i mitten

[@EFreddy]

Av annonsbilderna och döma på Teknikproffsets hemsida så är det den modellen jag upplever fungerat bäst för mig. Samma som jag rekommenderar i videon därmed. Om det är samma innehåll i denna låter jag dock vara osagt. :) Värt och veta är att just 307 är en modell som kom mitt i bytet från det tidiga programmet Peugeot-planet till Diagbox. Dessa bilarna är väldigt (från fall till fall) svåra att läsa av överhuvudtaget tyvärr. Ju nyare den är desto större chans att det fungerar dock. Tråkigt och höra kanske men det är min uppfattning efter ha provat bsi'er osv i diverse bilar. :/ Är det just en specifik bil du vill köpa instrumentet till, eller vad känner du att du vill få ut av ett köp? :)

[@Andy_83_SWE]

@@EFreddy Tjena, och tack för svar. Det jag vill göra egentligen är att kalibrera min nya EGR ventil samt tala om för bilen att den har ett nytt partikelfilter, vilket jag monterat. Dock fattar inte bilen det själv, utan fortsätter på det gamla filtrets siffror och därmed regenererar den för ofta. Pratat med Peugeot och för ovan nämnda jobb kommer dom att fakturera 3000:- så det är absolut värt att investera i detta själv. Min Peugeot är sista modellen av 307, uttagen december 2007

[@mrkingjohansson9979]

Bra å ha för å koda in spridare lägga in farthållare mm läsa felkoder byte av bsi .gör en video som visar hur du lagar en bsi typ byte av relä chip när parkering ljus inte fungerar vanligt fel

[@p200pug]

that's not lexia 3 :DDD this is interfce Actia XS Evolution :)(that's the hardware) Lexia3 is software for citroen before CAN cars /Peugeot Planet 2000 if for older peugeot / Diagbox cover all CAN peugeot/citroen/ds/opel...

[@MsRoBass]

The change from Lexia to DiagBox was not depending on CAN. Also cars of 2000 are covered by DiagBox, even Peugeot used still their own not-CAN compatible data bus (e.g. in Pug 5MF etc.). Lexia was only the ancestor of DiagBox with a more DOS-like GUI. DiagBox covers same cars plus newer models. Nothing else is different. the module is a simple data processor for bus-serial transformation, nickname connected to the first software usable with... The functions are the same like in OpCom or VAGcom adapters.

[@Michal_Sobierajski]

Poor quality video

[@Glupkomatun]

Klingen klangen