Lexmark 50F0Z00 Imaging Unit Recycling.

[@draganvidic7994]

Thank you very much for this video. I repaired my Lexmark 50F0Z00. No more silly white lines. 👍👍👍

[@GIMIKBG]

Thank you too!

[@garymeyers4997]

will the units ordinarily develop problems (faded print) which varies in intesity around 28k prints instead of 60k?

[@veronicab5999]

Hello , can i ask what is the liquid you use on the rag to clean the black cilinder at 12:13 ? Is it just water ?

[@GIMIKBG]

It is a windows and glass cleaner.

[@juanfco.martinez6600]

Yo no tiraria el toner al minuto 9:18 ya que esta limpio, el residual del 3:57 si.

[@GIMIKBG]

There are particles in this toner that cannot pass between the developer roller and the blade. That's why I'm throwing it away.

[@MohamedAmin-zy3cv]

do yo add just toner to tank or developer ?

[@GIMIKBG]

Just toner!

[@arkanthor_art]

Interesting. Would this help with vertical white lines? I have an old MX317dn, and the imaging unit was more than buying a new printer. Seems like a waste to just toss the printer though.

[@GIMIKBG]

Yes, it will help.

[@jeronimomurruni]

By replacing the drum cleaning blade at 8:09 you can solve the white vertical lines problem, it's that metal plate held in place by 4 screws. It costs 5 US dollars or so.

[@GIMIKBG]

Thank you!

[@juancarlosgonzalezvillanue5254]

14:48 es toner o polvo revelador?

[@GIMIKBG]

It is toner. This machine works without developer.

[@robrguez3364]

Que cantidad de tóner se pone en el relleno?

[@GIMIKBG]

60-80 grams

[@gabrielvedia9331]

Que es lo que le pone a la cuchilla?

[@GIMIKBG]

It is a powder lubricant.

[@bobysbond]

hi brother, can u make a tutorial with a 55B0ZA0 Lexmar imaging unit please? thanks

[@GIMIKBG]

I have not come across such a cassette. I guess it's something similar to the one in the video.

[@davidismaelhernandezvielma9422]

Nice to greet you friend, reload the imaging unit and the printer gives error 31.60, why is this error?

[@GIMIKBG]

Remove the toner cartridge and imaging unit and look at the top, right area inside the printer. You should see a set of four metal pins. They must be in straight line! Hope that helps!

[@daniadiaz2426]

Cuando llega a su final de vida util ls unidsd de imagen no hay como resetiar

[@GIMIKBG]

You just need to change the chip on the imaging unit.

[@oTToMotorXT]

it takes 20 minutes?

[@shqbsfudaipuritcell5921]

sir mere printer me ye show kr rha hai (no-lexmark imaging unit,see user's guide [33.02])

[@GIMIKBG]

The printer posts an error code 33.xy - Non?Lexmark [supply type], where “xy” denotes the type of Lexmark supply (i.e., 33.01 for Toner and 33.02 for Imaging unit)

[@SP6QKX]

[@GIMIKBG]

Thank you!

[@SmotriGlazami]

🥺 ребят! вы себя реал не бережете! тонер не выводится из легких, а если и выводится то очень долго и в очень маленьком колличестве! 😱 мне прям аш страшно!😰😨 пылесос 3м есть же...

[@GIMIKBG]

Be careful. I personally use a fairly powerful aspiration that takes everything outside the room in a nano filter.

[@SmotriGlazami]

@@GIMIKBG это все объясняет

[@GIMIKBG]

😉