Thumbs up for the effort! Came out really nice. As a professional I would suggest putting your sub under rear windshield, in a sedan like yours it gives the best sound, in a sealed box not free air of course. And protruding sub in trunk is an always matter of time of when this speaker will be damaged by a bag or something else carelessly thrown in a trunk, put a grill asap. Next time try to angle the sub in a trunk such way, that it don’t gets easily in a way of luggage and try making it not retract from the box it is in. An some inner cage would benefit on sound also, on higher volumes especially. Great work
@Cougar139tweak8 ай бұрын
Tape! You genius!!! Much appreciated, tried other ways, that's brilliant!
@Dsturb858 жыл бұрын
Now that's how you maximize your trunk space! Sweet set up man, that's exactly what I am going to do to my car
@itznoah2312 жыл бұрын
Did you do it like that
@janjohnny4945 Жыл бұрын
@@itznoah231 😂 I double he did it. Edit; doubt
@itznoah231 Жыл бұрын
@@janjohnny4945 😂😂😂
@ZeroGHome247 жыл бұрын
At first I was like but what about the electrics and stuff but then I was like Wow! Great Job there and you didn't have to sand it and paint it for 10 hours. Now this box I can make. Thx man 👍
@swank19759 жыл бұрын
Looks great. I'd say it needed more fiberglass build up before finishing.
@JOEGGGJOE8 жыл бұрын
+Mike Swankhouse I agree with you.
@linkedupent.31126 жыл бұрын
Mike Swankhouse x
@BruceBusby6 жыл бұрын
It's much too thin. Minimum of 4 coats 1.5oz chop cloth
@checkforfleas94524 жыл бұрын
Don't worry that glass didn't last long at all. That sub jumped right the fuck out lol. If I can see Fucking daylight through it, its not enough at all. I could see his damn lawn through it. Even with the filler on
@topnotchcontent Жыл бұрын
Nice
@bsaeger57894 жыл бұрын
Wow, dude that turned out soooooo good, and then you came out with the W7, I salute you brother.
@89imp0310 жыл бұрын
Nice clean install
@CarAudio41110 жыл бұрын
thank you
@tomaszowca76368 жыл бұрын
+CarAudio411 Hi. What type of tape have you used? This is normal masking tape or special for laminating
@roylikesitlikethat7 жыл бұрын
Robert Cousins So the mold release wax is essentially car polish? are there spray type options? thanks
@MrKastro5027 жыл бұрын
When i was doing fiberglass we used johnsons paste wax (yellow can)... you can find it at walmart with the furniture polish... if you apply it right you can release from the mold with nothing more than an air sprayer and it pops out like an ice cube from a tray
@sandisandi-bl9sg10 ай бұрын
Сэр, я очень доволен этим видео, чувствую, что оно помогло мне в работе, и я очень благодарен.
@48884BB8 жыл бұрын
this is a realy nice build. it looks great and the trunk is still functional. however, I've heard people say that fibreglass is not good to make sub enclosures with because it flexes too much and screws up the sound of the woofer. but is this true? and if so, is there anything you can do to strengthen it? could you just make a wooden frame on the inside(if you reduce that from the airspace) or would that affect the sound as well?
@the_3rdKind2 жыл бұрын
Yes, this is terrible for sound quality and it also rattle your decklid by facing the sub INTO the trunk.
@HansV62 жыл бұрын
@@the_3rdKind my sub is facing forward and the trunk lid also rattles.. Just add some aerobutyl and no more rattles :-)
@frednot8094 жыл бұрын
Love the sign in the background
@mahntasticfilms6906 Жыл бұрын
Looks dope! man I really want one for my 2022 Lexus IS350
@hellobooom5 жыл бұрын
I always like the look of these, but with such thin walls I would imagine a lot of SQ is left on the table.
@Keeping-It-Real-557 жыл бұрын
There is always going to be those guys that critique your work. I say it looks great, and as long as youve pounded that sub and your not hearing any rattling or unwanted noice from the speaker box, then you accomplished what you wanted and I'm sure even if it was under the airspace required, still sounds better than stock, and you have your entire trunk for storage still. Congrats I think it looks great, will that box fit a 9th gen accord?
@BurningDownUrHouse6 жыл бұрын
If its under recommend air space he can just do poly fill
@hellobooom5 жыл бұрын
@@BurningDownUrHouse Poly Fill sucks, go with pink fiberglass, yeh it isn't nice but it's worth it ALL DAY. There are also limitations to what you can achieve by stuffing a box before it dies completely.
@atraxr6038 жыл бұрын
Nice stuff, but that seems to be waaaay too thin for such a sub. It should be at least twice as thick.
@carguru052710 жыл бұрын
Clean looking box! music needs changing though :X
@dsmdallas24666 жыл бұрын
SO NICE! Great work brother!
@walterdiaz486 Жыл бұрын
la verdad quedó muy grosooo👏👏👏👏
@dionesfreitas704127 күн бұрын
Fala meu patrão tenho um projeto com dois bixopapao de 15 na trazeira do fusca .... e possível eu faser uma caixa para esses dois só se resina pra melhor aproveitar o espaço? Ou não aguentaria as pancadas?
@jeffbanfieldsflwr35372 жыл бұрын
That is awesome. I know what I'm going to do now.
@vergilcase95158 жыл бұрын
Great job. I'm inspired. Thanks for video.
@coryhaynes87557 жыл бұрын
so many know it alls here. I've been into car stereos so long that I'm no longer into them. all these doofs saying where's the port. why's it sealed? do your homework people. it's not all about chattering your fillings loose with beats. buddy probly just wanted a nice blend of everything. ever heard of an audiophile system? and a sealed enclosure will always sound tighter and better.
@slow_rednline48744 жыл бұрын
@Matt Miller you laughing but he is absolutely correct
@dlastmohican713 ай бұрын
Seems like these enclosures would have a hard time being rigid enough to not vibrate and ruin the acoustic considering that wood boxes are recommended at 3/4 thickness. Also didnt show how to determine the volume of the enclosure and to check for leaks
@farcry12579 жыл бұрын
Great video.. Nicely done box
@Frankiebonez3378 жыл бұрын
Nice way to do the enclosure, hope you made that shit ALOT thicker with a friggin W7 in that box. Since it is butted into the car the cars body probably helps with box flex but still that shit was thin, especially for a high output sub like the W7
@houstonastrorider7132 жыл бұрын
same thing is was thinking looked way to thin,,, definitely needed more layers of fiber...
@TheLifeOfGusAndHank6 жыл бұрын
Nice work guys!
@AlabamaPoe3 жыл бұрын
I'm getting this put in my lexus
@eviits5 жыл бұрын
who the hell downvotes this, awesome job!
@aviramnarine97014 жыл бұрын
That enclosure is was to small for a W7 also looks like it needs a lot more fiberglass
@RCDee8 жыл бұрын
Very nice and clean. Though I would've skipped the sanding, since you are covering it with carpet anyway. But overall, good job.
@edgu71eg6 жыл бұрын
Numbet one thing I hate in the world FIBERGLASS WORK But it looks nice!
@alexisgb21425 жыл бұрын
Quedo bonito amigo.
@mikecasey30554 жыл бұрын
You did a good job on that fiberglass, if I want to do this all I need to do is lay some painters tape down over the carpet? Then Fiberglas it?
@SchakkasRCGarage7 жыл бұрын
Vera cool an unique Sub Case
@123stevevw3 жыл бұрын
Looks great! How is it then attached to the vehicle or is it just sat in place?
@untouchablesrt49210 жыл бұрын
Badass 20 stars for u bro
@p3l1k44n18 жыл бұрын
It's nice and clean. Turned out to be really good. But it's missing a reflex pipe.
@Will3ist8 жыл бұрын
+Jsp P5 Taunus doubt the volume is even calculated for this sealed box, calculating the correct volumes and port tune is very important.
@pedrofranca998 жыл бұрын
Ficou show!!!!! Essa caixa,, e som?! ficou armonico??!!
@carltoncook95068 жыл бұрын
looks awesome!! do you have a material list or a brief step by step? I upgraded car but downgraded boot space so willing to DIY similar to yours. thanks
@CypherDaSniper8 жыл бұрын
I really need the room and it sucks because in dieing to have some beat out and I can't. I think I'm going to try doing this.
@OK-st9st4 жыл бұрын
I feel like it would tip over when you turn, but looks sweet!
@djstanstillmke8 жыл бұрын
you shoulda burped the box for us.. How is the sound quality? what frequency did the box tune into? i want to do this exact style build to my '02Protege5..I want to tip and turn the subs 45degrees up and in..so they sit much like yours and fire up into the center (literally) of the passenger cabin. i want to build boxes on both sides that exactly mirror each other. great vid. thanks for showimg your work!
@Ssawekboomboxdiy5 жыл бұрын
Profesjonalista 💥💪🤚
@joshhanson67778 жыл бұрын
very nice. good video too.
@wordtruth6116 Жыл бұрын
What did you do after you put the fabric on the front? It looks like you put putty or Bondo. Pls explain. Thanks
@bryanviper7 жыл бұрын
How many layers of Fiberglass did you put on? Seems way to thin IMO. I got a fireglass setup for a 12TW3 & we have like 3-4 layers of fiberglass to make sure its good and strong.
@idan12427 жыл бұрын
very nice and if u can tell pls which type of fiber did u use back than i would like to know... i have no clue on fibers types and which type is best for woofers enclosures and speakers thank u
@Tomnician8 жыл бұрын
If you are asking about what kind of tape is used please don't attempt this project yourself.
@3rdzodiac8 жыл бұрын
Lol. Right
@grantgarrison62078 жыл бұрын
Considering it was just regular ole painters tape I am not sure the people that made this should have attempted this - Also a JLW7? That box will blow apart if it is ever fully powered. I don't know what kind of body filler they used but definitely should have had a lot more glass. Whatever works for them though... I would have gone about it a different way personally.
@Tomnician8 жыл бұрын
You missed the point(this IS the kind of tape you use, it's just people who don't know what painters tape is probably need not attempt a project like this)....and you also underestimate how strong fiberglass is...I've just one coat of fiberglass on my prototype and you couldn't PUNCH a hole in it. That would certainly make just ONE coat of fiberglass stronger then that of the speaker surround(Which would have to be stronger to blow apart the box.) As far as acoustics is concerned, well that is not what you were arguing for...the fact that the box is form fitted to the trunk surrounding(makes it much more durable), not to mention the fact that this is a sub in a TRUNK...all things considered that was more than enough fiberglass...
@smnkm4ehfer7 жыл бұрын
Thomas Chafey no, it was a shit project through and through.
@Tomnician7 жыл бұрын
You don't know what you are talking about.
@edivaldosantossilva73077 жыл бұрын
Amigo gostei muito fico legal msm parabéns
@VintageandVoltage8 жыл бұрын
Is that enough airspace for a W7? I doubt it is... Also, I would have made that fiberglass much thicker. Those subs are no joke.
@JG-fr8py7 жыл бұрын
nah I had a small box like that and it was built to spec
@BurningDownUrHouse6 жыл бұрын
Ever heard of poly fill?
@slow_rednline48744 жыл бұрын
Sealed boxes are typically much smaller than ported boxes
@casey7788 жыл бұрын
considering the small amount of air space to you get much bass from this set up
@Livesoundcar5 жыл бұрын
Nice dear friend. I am from Russia 🇷🇺! Hello 👍🏻
@ДмитрийСмирнов-м9я9 жыл бұрын
класнно выглядит для повседневных покатушек))
@wrecpunder58732 жыл бұрын
At that point u could literly make the trunk its own box
@raiderman287 жыл бұрын
nice work!!
@jossaudio4 жыл бұрын
amazing
@dylanmasson880910 жыл бұрын
love the blue tape :p
@robertfranks39345 жыл бұрын
it will take 10 years to sand that shit down was that as smooth as you could lay that shit
@allaningin12795 жыл бұрын
nice jobs
@davidpieratt5 жыл бұрын
question is, by the way excellent job, how did it sound?? Reason I ask cause I had two 12" boxes and positioned them like that in video and sound inside cab was horrible. It was almost like no subwoofer was added, only made car rattle but no actual bass tones in cab. Your thoughts???
@aaronkees11456 жыл бұрын
looks good
@topledspartscustomicoeseac9098 Жыл бұрын
Vc faz uma dessas para gol g6 para sub shoker 650 rms 39 litros
@julio547244 жыл бұрын
Ficou muito lindo cara
@EliteSniperFMJ9 жыл бұрын
Very nice. How much would u chargr for a custom enclosure like that
@_N_B_04967 жыл бұрын
So how do u calculate the volume? And if u were to do a ported box like this, how would u tune it? Thank you!
@MADBASS778 жыл бұрын
Good work but the walls are very thin and at what power dynamics, they just broke !!!
@tjjohnson62595 жыл бұрын
Looks great. How much resin did you end up using?
@chrisgraffam33574 жыл бұрын
do you roll it out with a noodle roller at all i mean if you felt it i guess but ...
@svitroful3 жыл бұрын
** Very nice, how many hours did that take you?
@jabdias93695 жыл бұрын
great job...
@jeffsenecal41683 жыл бұрын
Whoa, great video! . What do you think a shop should charge to build a custom box like you so expertly showed here? How much does it cost for the parts and product needed to build the box, and how long would u say is the total time it took you to build it. Its hard to tell as its on KZbin and all the video editing. I was thinking about doing this myself, im capable, but lack the garage and tools, im not very handy but am a fast learner. U r a pro, can a novice do it yourself, or is it too difficult? What do you think? Thanks! Jeff
@AlexisJavier184 жыл бұрын
I see that it is a 12w6, box has the internal cubicle that the manufacturer recommends?
@HammyTechnoid9 жыл бұрын
I wanted to hear it bump, but, oh well....
@davidhamm56267 жыл бұрын
It might have been better to have built it, figured out the volume , and then got your woofer. Filling it with water, then measure what your have in litres.
@lilart13ab5 жыл бұрын
What about the other side? Also why didn't u play the woofer?
@brentyuers89638 ай бұрын
Nice
@k_roadrunner3 жыл бұрын
How did you connect sub amplifire to the original audio system? What kind of masking tape did You use?
@renatolc826 жыл бұрын
Excellent!!!
@JoseMSilva-ox5ec7 жыл бұрын
Video en hyundai tucson limited 2017 plis
@jailsonjosealves22125 жыл бұрын
Você consegue fabricar um caixas Para o marea sedan?Assiste 10 caixas nenhuma me agradou.
@Bley_1210 жыл бұрын
nice but how do u determine what cubic ft u need, or did u just not even bother with that, also how does it sound, u did all that work and we don't get to hear it
@miketlane9 жыл бұрын
it sounded just as good as your computer speakers will allow LOL
@aldenildonapoleao74013 жыл бұрын
Preço da caixa para Creta 2020
@0827akiyan4 жыл бұрын
とても美しいインストールです‼️
@arnoldddorseyiii43372 жыл бұрын
How do you know if you have the right cubic air space
@DesiSegundoIII9 жыл бұрын
What did you use for the fiberglass? like is a kit, ok to use?
@chuyvelazquez99704 жыл бұрын
Super.
@paularcaria2 жыл бұрын
The sound of a very small air compressor
@criatorioaguafriajunioremm66673 жыл бұрын
Boa vc é de onde
@MrRoberacer10 жыл бұрын
what was the approximate price to the customer for that? Without the raw speaker driver if possible.
@kyle34209 жыл бұрын
Did you even glass the baffle? It looks like you just fleeced and coated that with resin and then a milkshake filler. If this is true then you have done it all wrong. The glass gives strength. Not resin and fleece. This poor W7 enclosure is probably all cracked to hell because of this.
@stefanov924 жыл бұрын
good luck changeing a lightbulb on that side
@andyclifton65948 жыл бұрын
how did you keep it from moving around when driving
@zintar110 жыл бұрын
did u put fiberglass on the front or just put the raisin on the flees then bondo
@danielrendon59745 жыл бұрын
Make a box for the 2014 maxima's?
@TeaBoneXDTV10 жыл бұрын
very nice... but after all that a small sound demo would have been nice to hear. just saying
@lillnemo19 жыл бұрын
a sound demo via youtube? how the hell do you suppose to hear HOW IT SOUNDS? same as seeing those bluray commercials on the old fat TV's You cant see high deff on a old TV so you also cant hear this setup's sound without standing next to it
@johncoates83528 жыл бұрын
Was it your intention to seal the HVAC ventalation outlet of your car? Do the windows fog up in the winter?
@mastersonido8 жыл бұрын
how much for an custom case for 2011 Ford Fiesta hatchback on the passenger side
@edivaldosantossilva73077 жыл бұрын
Que tecido vc colocou na frente da Caixa pofavo eu Quero fazer uma poriso tô perguntando
@Honda_life_2020_4 жыл бұрын
How much was this job
@SantiagoMartinez-yk9hz4 жыл бұрын
faltó el laberinto
@levisalvadormontalvoperez34938 жыл бұрын
hola amigo como se llama la cortadora que utilizas para lijar el cajón