LG not spinning waster out of clothes and making noise diagnosis and repair.

Call us today with you model number and we will make sure you get the right part
888-655-8569
In most cases we can get you the part the next day if ordered before 4pm central time.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Donations are appreciated you can donate here - www.paypal.me/Beardedappliance
--------------------------------------------------------------------------------------------------------------------------------------------------------------
My Camera Set Up/gear
Go Pro Hero 8--amzn.to/3lnXIcz
Go Pro Hero 8 w/Accessories - amzn.to/3eSLvdf
-------------------------------------------------------------------------------------------------------------------------
Here are the links for the parts
-------------------------------------------------------------------------------------------------------------------------
Coupling - amzn.to/35J6RXe
------------------------------------------------------------------------------------------------------------------------
Stop by our Amazon store to pick up must have tools for appliance repair
www.amazon.com/shop/beardedappliancerepair
-----------------------------------------------------------------------------------------------------------------------

[@jahovahjira]

...and THREE YEARS LATER YOUR VIDEO IS STILL HELPING PEOPLE!!!! Thank you so much for being so generous with your knowledge and time! This video solved my issue along with another video that solved my sensor issue. This video was so helpful and saved me a ton of money! Thanks again and may God richly bless you!

[@valerielussier4932]

Thank you thank you thank you! Because of your video, you saved us a ton of money! My husband just changed the same piece, followed your instructions, and my washing machine is perfect!!!!

[@larryfuentes2481]

Thank you so much for this video. I had exactly the same problem with my washer. I bought the parts from the number you listed, followed your instrctions, and all is well in the world today.

[@MarkDixon-qk8in]

Thanks! Haven’t done it yet, but gives me guidance and courage to try instead of buying another washer. I appreciate the no frills explanation. We did do the cleaning first and this is next. Thanks again.

[@benziebro-he3cg]

Thanks for making this video, the noise as you described is exactly the problem on my LG top load machine. Thanks again

[@randysimpson1418]

Thanks! Great advice! My coupling was actually cracked, but I replaced it in 30 minutes.

[@Onemattressatatime]

Great video thank you for sharing , LG and Samsung appliances are becoming job security for us

[@RCinginSC]

Yes, thank you. Mine is still under warranty, so I will be calling today.

[@pablomascorro4242]

very very nice it sure did save me a lot of money. thank you

[@shanatukorala7752]

Nice video! I think I have this problem, but just couldn't remove the nut, it is so stubborn! You make it look so easy, will try again, maybe with a socket wrench some one else mentioned.

[@Ringele5574]

Thanks for posting. You probably just saved me from buying a new washer over a $20 part.

[@alxalln]

Thank you for the video very helpful and informative!

[@oldgeek29577]

Thanks a bunch! I have plenty of appliance repair experience from another life lived long ago. I had to weed through a bunch of videos until I found yours, which made my life easier. I had a hell of a time removing the rotor, some Kroil and gentle taps on the shaft and patience finally persevered. I had already done the fill valve a couple years ago, I guess I will be doing the pump next LOL!

[@jrmtl]

Just wondering if you can help as I experiencing an annoying sound not sure if it's from motor or belts. Let me know and I describe more.

[@georgepaniagua6115]

I wanted to thank you for sharing your experience. Even the sound effects you provided were spot on. I just finished swapping out the coupling assembly and it eliminated the 1920s Al Capone era of the Tommy gun sound. I had a tech come out and give me an estimate of $480 to repair it. Part cost $40 from Amazon. Took 15 minutes to replace. As you said, the next item to replace is the water valves. Please post most videos as it helps those that help themselves.

[@BAYBAY_316]

Oh yes. My water valves went out VERY soon after purchase. LG customer service is so horrible that I just use manual valves I must remember to turn off but it works

[@AT-fi9ol]

Thanks

[@lerma2891]

You got a new subscriber here! When I saw you having to use pliers to take off that main nut at the beginning. Mine was loose already. Which I didn't pay no mind at first until watching the rest of your video when you said sometimes it's that nut. (KZbin handyman here) I've actually got a new washer coming today😅. Guess we'll have 2

[@lerma2891]

Thanks for this video!

[@zumbro3327]

Thank you for uploading this.. In my case, my almost 3 year old LG washer is not spiining and makes the clicking/machine gun sound. This video was very helpful with taking it all apart. However, there is no wear on the plastic or metal teeth at all. I greased everything, and manually the coupler pushes up and down fine. Would the motor be the next possible problem?

[@chuckmortensen625]

Great Vid what's the part number on LG washer coupling

[@chrismcalee7462]

I was getting the machine gun sound for months. Now I have the UE error. I was thinking it was the clutch assembly but I’ll try this first. Thanks!

[@brianbowman8691]

Same here. What was your outcome

[@tagay]

2:43 That's exactly the sound that's coming out of my washing machine.

[@foundingfather4266]

For anyone who has a hard time removing the nut, I put a full load of wet blankets in the washer so I could get some weight in there and generate a little more momentum doing the push and pull trick. Also a short prayer after 45 minutes of fighting this thing may have helped 😂

[@batman88ironman]

It would be helpful if you could have recorded the sound it was making before you took it apart. I have a washing machine that makes an intermittent sound during spin cycle and I don't know if it's this issue because it is a direct drive but I have no idea what it is

[@knesalscience]

The shaft all this goes over.. mine has a little play in it. Should that be? Or should it be tight?

[@taftstephenson1499]

Diagnosed this because gear coupling completely shredded- however got everything removed and was getting ready to order coupler and the shaft assembly but noticed the bolt or rod that it turns on sort of had bent skinny washer type looking which I pulled out - is this the main underlying problem which causing the coupler to not engage and get shredded etc ? Should I replace whole bearing assembly?

[@marcoslugo5542]

How u doing buddy what washer brand do u recommend ?

[@regpeeler5509]

Could you comment on possible water left in machine. Should we be aware of water before we flip machine and are there any suggestions on making sure all water is gone.

[@chrismcmahon6688]

This is the problem with my washer but I cannot get the nut off, it’s recessed unlike the one you show. I can’t get a nut splitter in because it’s recessed and I’ve stripped the nut. Any recommendations?

[@amorales9613]

I have a newish LG washer and I've noticed that within a year of buying it, that the top rim of the plastic basket which hold the clothing had scared against something in the washer and summer of the plastic room had been shaved off. What causes that? I called the company because I had a warranty on the washer and they told me that I must have put too much clothing in the washer. I told him no, that wasn't the case. Do you have any idea why the top rim of the clothes basket would be shaved or rubbed off? The machine still works, but it's a puzzle.

[@appliancealliance4444]

Can you do a detailed video showing off all your tools, the tool bag, and what's in your van? Thanks

[@carlosalma4620]

My washer keeps giving me LE error after I replace the shifter and motor will make a rattler noise, will it be the actuator motor?

[@mr.spittle136]

I've had several of these with a pesky UL code for running out of balance (even with nothing in it) and will not completely spin out clothes. Any idea what is causing this besides the board?

[@ivoreenwilliams2783]

My LG washer stopped washing, the tub not turning over the clothes but will spin out the water as usual with the tub spinning. Please for your advice

[@chrishoover6926]

I'm having noises and getting the LE code on my LG washer. Do you think that this could be the cause?

[@juniorvillarreal9232]

Thank you for this. I was having that same issue but everything was good underneath. My issue was the spring with the teeth on mine as loose and held with 1 screw. Got it back on and tight and put the motor back on but now it's throwing an error LE code. Does it have to sit upright to re-balance itself before you start it up. I do know there's no more noise while spinning the tub by hand. Any help will be appreciated. Thanks

[@ClimbingOntario]

Dont spin the tub by hand very much. It can cause an error code and the washer light inside stays on. Happened to me.

[@a68riz]

Can a motor that has had a leak be fixed / cleaned?

[@mikevolz2474]

Replaced the coupling assembly which was worn as described in the video and now washer giving us an 'LE' code (motor error), followed steps for replacing coupling again double checking for proper installation and still receiving same 'LE' error code.

[@MohamedElsayed-be2ce]

How can I buy the coupling I can't find it in Egypt thanks alot

[@jonhchorizo9555]

Any chance does this help with an E6 code?

[@samkitty5894]

Using power tools on screws that go into plastic is sure way to strip them.

[@angierodriguez7976]

What code does the machine give you? For this to be replaced.

[@MohammadSawalhatheboss]

Mine has a stuck motor sound it sound like it wants to turn but it humms like a motor is stuck. If this part is bad would it do that?

[@tonytempla6066]

I have an LG washer WT7700HVA /01 my part is metal no plastic?? Can you help me out? Thanks

[@EdMaring]

Whats the part number? When I looked up my model WT7155CW only complete gearcase and clutch assemble is available for $250.00.

[@user-ot2js9pl4n]

do you have an updated link for the coupling??

[@yuichu6957]

Was there a part number I missed?

[@a-1tvsalesservicellc186]

We see this issue on a daily basis.

[@robertflagg2541]

Was there an error/fault code?

[@user-wc4ii6kv5g]

Hello , I've change the coupling of my washing machine but after changing it , it has a difficulty on spinning like its jammed or something.

[@jmiller967]

My machine made that “machine gun” noise. Then it gave me an LE error code. So i ordered a rotor position sensor and changed it out. Now im getting a E6 error code. Could this be the issue?

[@neygolf]

What’s the link for the motor ? Thanks

[@jerm5772]

What could cause the stator and rotor to rub against each other? My machine is doing this. And its mostly rubbing to one side, causing an uneven wear on the magnets on the rotor.

[@jeffbarnowske5598]

Bad bearings. Might be time for a new Washer

[@jrmtl]

Hello, I would need some help with a pinging sound when my washer rotates left to right during the wash cycle... Would anyone have an idea as I can send a video and seems like it's coming from underneath?

[@thandiphani6693]

What do yo call thank u spare u put in

[@blackstoneroofing1]

I have the same washing machine and mine is not agitating. The Model number that is on the sticker on the side is not pulling up this washing machine on a web search. Do you happen to know the model number to this machine? Thanks.

[@jasondlynch6643]

It would be great if you would list the part name or even the part number been looking for that part online thanks for giving us the part number all the extra BS in there and couldn't even get the part number or the correct part name why?

[@lenbigdog2476]

what's the part number ?

[@shnt3571]

How much was that parts ??

[@nycreddog6934]

Mine is stuck and won't come off..please help...

[@johnhenderson8869]

Amazon $500 pesos por la parte

[@user-tc8eo2is3d]

Machine gun liek noise won’t go into doin and get le error I might now go check this