Lian Li O11 Dynamic EVO Build / Unboxing - Z790 AERO G , I9-13900k , 4070TI AERO OC

[@daviddesrosiers1946]

I'm doing a very similar build in the black version of the dynamic evo. Same mobo. In case you didn't know, using the top nvme slot on this board cuts your CPU pcie lanes in half. I'm using the other slots that utilize the chipset lanes.

[@mchwmedia]

I've been wanting to do a similar build, looks great!

[@Santihell_]

Damn this is just gorgeous

[@fahim454]

Can we remove support bar on front? And no dust filter on top?

[@Yaryscze]

every youtube builder using this motherboard havent got a clue about using the top nvme slot dowbgardes their pci-e slot to work at x8 because its shared pci-e lane ... READ YOUR MANUAL from your motherboard . Your GPU is not running x16 if you use that slot for nvme

[@powerofryzer5082]

Just perfect

[@NikBuhler]

did you use 120mm fans only

[@likbum]

but where did you buy the lian li cables adapter for the 4000 series

[@_AshishMohanty]

bro the top aio fans are facing in opposite direction to each other it may affect ur temps

[@bigbigumms2661]

He's just doing a push-pull variation, it actually is better for temps

[@_AshishMohanty]

@@bigbigumms2661 i know but the fans should facing the same direction either for intake or exhaust

[@shinmopi]

You're absolutely right.

[@BabyNurse0205]

how much it cost for this whole set

[@_AshishMohanty]

is the contact frame a utmost necessary for 13900k I will be mostly be running blender and after effects and all 3d art software beside gaming

[@lucienrakoto4416]

WHAT NVME 2280 OR 25110 CAN USE THIS MOTHERBOARD FOR 5.0 GEN NVME?

[@Velmyra]

Is it possible to add one more fan to this build?

[@FragileNerd]

Yes

[@daviniarobbins9298]

Is there a reason why you are wearing gloves?

[@toytactic2626]

Just to prevent fingerprint

[@daviniarobbins9298]

I hope the GPU cable adaptor doesn't melt on you. People have had problems with that. They get a few days use then they got to RMA the card because the connector melted. You really should have brought an ATX 3 compatible PSU. I hope at least you are using 2 PCI-E cables for the graphics card. Even a SFX PSU like the Asus ROG Loki 850w PSU would have been better, at least it has the right ATX 3 PCI-E cable. Stop using the adaptor cable right away and go to Cable Mod and buy a better PCI-E cable.

[@toytactic2626]

thanks for the recommendation already replace the adaptor cable

[@ecosti]

So a psu with a 16pin should be actually perdectly fine and risk free right ?

[@elgreco502]

There is no problem at all. The 0,1% they made it melt it was bcs they didint connect the adapter into the gpu correctly .

[@Velmyra]

@@toytactic2626what did u replace it with

[@jaredmoss8170]

@@elgreco502 Yep. Way less than 0.1% at that. Each time was due to different factors: connectors had debris in them from connecting/disconnecting too many times without cleaning allowing plastic and metal shavings to get in there, not connected all the way was another case, and low quality connectors was another case.

[@peterpeter5666]

dont understand why u spend all that money but only use an 850 watt power supply. havent used less then 100 watt power supplies the last 15 years , better to be safe and have more power then forcing ur PS to it max all the time

[@leonguyen0710]

May I ask how many pin on Strimmer Plus V2 is that?

[@toytactic2626]

16pin

[@leonguyen0710]

@@toytactic2626 how many pin on the card and how many pin on the motherboard is that?

[@Nico_Kovach]

Красивая, белая сборка за стеклом. А комментаторы такие "душные")

[@ClosedEyeVisual]

HDD? Really?