So in todays video we take a look at Lidl's range of air tools.. Enjoy! Contact Email: thesavagegarage2016@gmail.com
Пікірлер: 297
@retrorestore7 жыл бұрын
Very handy Air tools, bigger compressor needed but you already know that.
@davidohayon44986 жыл бұрын
מדנה
@richardclare7006 жыл бұрын
These tools are brilliant, they will last for years providing they remain unused in their boxes
@benjamun30586 жыл бұрын
These tools are rebranded and most low cost air tools are all exactly the same with different brand names etc. I have loads of budget air tools and they’re all exceptional, it really depends on the compressor and not so much the tool! Really good for the money
@Mk2Mitch6 жыл бұрын
Another wicked video, good to see what you can get for your money
@spladdy0077 жыл бұрын
Great little video!! Very informative, off to buy some tools!
@austinmaxi5557 жыл бұрын
good to see you back, a few people have mentioned that your compressor might be a tad on the small side however you can link multiple small cheap compressors together as and when funds allow to enable the running of greedier air tools. kindest regards Martin ps the music is a tiny bit annoying.
@andy118947 жыл бұрын
glad you mentioned that it was the compressors fault with the impact wrench my dad has a 50l compressor and thats not enough for his MAC impact wrench can do about 2 bolts then have to wait for a full tank again :/
@krulleman6 жыл бұрын
Cool video mate fun 2 see I also buy stuffe from lidil its fun 2 look in 2 the baskets in the lidil shop
@res14926 жыл бұрын
Great video, the ones id get are the drill, impact and the angle grinder, the rolok attachment for them are amazing
@basje17 жыл бұрын
nice vid, I myself was thinking of purchasing these tools. good to know I would need a little larger compressor
@marksealeycalibra7 жыл бұрын
nice video....the tools look ok for ppl like me on a budget.....when doing stuff to my calibra
@nathancloke65516 жыл бұрын
I've brought a few of the parkside tools from Lidl and ive found them to be great bits of kit. I haven't used them out on the job yet but for around the house jobs and hobby usage, I would recommend them to someone who is looking for a casual and reliable tool within a good price range any day.
@timoklap Жыл бұрын
And everuthing also has 3y warranty, most of them are made in germany🤔
@TiborVisnai6 жыл бұрын
The most of the tools are quite good for this price (I have almost everything from the video), but 102 l/min. from this small compressor isn't enough for them. The bigger tools (+ the sandblaster) need 180 + l/min (sandblaster - 310 l/min). Good video!
@ianrowan34096 жыл бұрын
Tibor Višnai h
@Badgertronix7 жыл бұрын
Lidl sell some random stuff. We don't have Lidl here in NZ but on the Gold Coast of Australia they sell snow chains...
@eMMjunaYschion7 жыл бұрын
Why not? Snow Chains can be handy when off road or on sand surfaces.
@unnerbuxetruckler6 жыл бұрын
Hey .. I'm from the country of Lidl ... the things are not bad. Greetings from Germany Peter
@caspernilsson6 жыл бұрын
Yeah, some of Lidls tools have lasted longer than similar tools that are more than 20x the price. I have that air drill and its great, feels like it will handle daily abuse for years to come. And even have 3 years guarantee.
@myppi_official6466 жыл бұрын
Lidl sells everything
@TheLexiconDevils5 жыл бұрын
How many times have I gone to Aldi for milk and walked out with some random tools
@Zebba506 жыл бұрын
You need to turn the pressure up on the air compressor for things like the wrench it was probably only set to like 50psi and It needs to be 90+. mine works fine
@upthereds49392 жыл бұрын
Yeah i was thinking they wouldn’t sell the air tools on the same day as the compressor if it wouldn’t be fit to run it. I know it wont run for long periods of time but it should definitely run any of them tools on show here
@sukhmaidickoff3 жыл бұрын
Wish they had that on sale in my country too. Especially the air-sander would be nice to have
@ashleymcgovern51207 жыл бұрын
Looks exactly like my Omega Wolf compressor, which is the same brand as Aldi use to manufacture (or at least at one time they did) as well, just my tank looks a touch longer. I was going to get a new spray gun when I saw these in but didn't in the end. I got the saw from Aldi Workzone the week after, it's exactly the same. I figured I would get an all metal spray gun, the white plastic tub broke when over tightened before. Omega Wolf might be a new company name for the same previous company or the old one & it has a new one now. I remember warranty / guarantee chasing a new air filter was a pain in the arse.
@TheLukey217 жыл бұрын
I'd definitely invest in a better impact wrench, a well made one will use less air and give you a lot more torque, I'm looking at buying the 50L compressor from aldi but i think I'll buy the tools elsewhere as the impact from there is pretty pants as well.
@JackDaniels-up5wn6 жыл бұрын
The main reason I watched the video was the paint gun damnit! Lol I would buy one of them if they work as I need to paint my gaff haha
@SwGuru6 жыл бұрын
I purchased a Parkside cordless drill about 20 years ago, for a few years it got used 5 days a week and has been used infrequently since, its still In working order though one of the batteries no longer holds a charge. I would recommend parkside tools they are great value.
@ezridax58096 жыл бұрын
I got there paint compressor it works great 20 min before it overheats and works fantastic on model kits
@TheCohesiveGarage7 жыл бұрын
Nice cheep tools~! Fun video
@Parknest7 жыл бұрын
I bought my compressor from Aldi a couple of years back and it is on a par with this one. It isn't exactly the best but they're great value and are of a decent quality.
@kiefergrossett36045 жыл бұрын
Have the compressor and it Carrys out all the tasks I need too use it for good bit of kit and reasonable on the pricing
@doloresmyatt97376 жыл бұрын
hi, when i brought a compressor years ago i was told its the cfm number you should look at as to the power of a compressor. the tank only stores x amount of air and also takes the pulse wave of air and calms it. eg your air tool uses 4 cfm (details on instruction leaflet) and compressor puts out 8cfm all ok with some to spare
@sly21966 жыл бұрын
True. Is Capacity really everything? Capacity for me is just how long the tool can run before the tank becomes empty and the compressor has to kick in and to add in that Air compressor is only delivering 103l/m or 3.6CFM which for an 1/2" impact wrench at 6 bar needs 4-5 CFM but they say you should double it for optimal use and we own a 50l 206l/m 7.3CFM and it can run fully undo 2 lug nuts and loosen the other 2 in 1-3 mins before it becomes underpowered. That being said is it better so have more air Capacity or a higher bar with both compressors having the same CFM considering they say most tools are optimal for 6bar
@MarkFox7 жыл бұрын
Nice to see another upload James. I'm sure those tools would work better with a much larger compressor, most of them use large amounts of air volume and that small tank just doesn't have the capacity to run them very well. I like your dads little Yamaha too!
@TheSavageGarage7 жыл бұрын
Mark Fox thanks bud, I will probably get a 100L compressor in time, just wanted something small to try use a blow gun and stuff with
@user-ks5ff7 жыл бұрын
Those air saws are good actually, you were trying to saw something that was flapping around, do the same with a hand saw and you won't have much luck either, it's for metal really, cutting body panels on cars etc, use it on something fixed solid and it'll work well, maybe consider buying a cheap keyless chuck for the drill too, or take one off an old or broken cordless drill if you have one, also in my opinion, a 90 degree die grinder is one of the most useful air tools you will ever own. oil your tools now and then and even cheap air tools will last a long time.
@kittychatbug72607 жыл бұрын
user12345
@user-ks5ff7 жыл бұрын
Charlotte Baker ?
@robinbatchelor16 жыл бұрын
This year Lidl are doing a 50 l compressor.
@90albert06 жыл бұрын
I bought a lot of tools from Lidl but sadly I returned most of them due to them being flimsy or faulty. The only stuff I kept were the normal hand tools. You do get what you pay for.
@duncanhowarth95145 жыл бұрын
Seems you got a whole bunch of stuff with your bunch of stuff which is pretty cool!
@patpathinayake35867 жыл бұрын
Thank you for the informative video. This is the first video with all the range in operation, thank you. Do you think Lidl and Aldi air tools would be compatible? Please post more. Bets of Luck! :)
@vistron8886 жыл бұрын
All the tools are good value but the compressor isn't large enough capacity for the impact wrench.
@gerry51346 жыл бұрын
V T what size do you recommend for air tools ?
@franckraymond62455 жыл бұрын
@@gerry5134 the work is ok with a 100 litres 3cv bicylindre compressor.(prodif).
@Subgunman6 жыл бұрын
These are ok for a hobbyist who uses them occasionally. Will not put up with daily commercial use. The major problem is that one has to wait until they bring them in for 'tool week' and then its a crap shoot if they will bring in the tool you need. The air tools are ok but most of my tools and compressor I brought with me from the states when I moved to Europe. Bought the high end Craftsman tools from Sears before their quality went to the dogs. The compressor that Lidl sells lacks the kojones to provide the proper volume and pressure of air needed for decent tools. The Harbor Freight tools sold in the States are far better than Lidl's products and they are both Chinesium made even though Lidl's products are not properly marked. Many times the package is marked Made in EU but on the actual product it is marked "PRC".
@TheSRBgamer635 жыл бұрын
Lidl month ago come to my county also,funny lol how u tube put this in recommended videos.
@bobtunbridge79965 жыл бұрын
I have the 50ltr compresser if you use the smaller red hose that comes with it it powers all the tools just fine but remember 50ltr is not much so it recharges quite quick,the long white hose great for spray painting but won't run the air tools power full enough if an when parkside do a 100ltr tank that would be the one to get but I doubt that would be portable with wheels on it
@nikiforos-kv2bz7 жыл бұрын
I have the air compressor. Its preety nice but I had to regulate my self the air pressure automatic stop because it didnt stop working and the emergency valve was opening all the time
@callumcrockett26086 жыл бұрын
The needle thing you said about its to get of stubborn rust
@w0ffle7 жыл бұрын
I bought the larger (3hp 50 litre) compressor from Lidl a few years ago, they had 2 marked down to £30 each! A friend of mine said "I bet it's rubbish" but mine is still going strong and has come in very handy. (Mine also failed to remove wheel though). You can buy better, you can buy worse, but in terms of value for money, this stuff is great.
@telosfd7 жыл бұрын
I have the compressor is awesome, a finishing nailer also very good i also have the sprayer but i didn't use it yet. I am looking now to buy the metal sheet cutter but i don't know how strong is it.
@DepT_ToxiC5 жыл бұрын
I've got a gun that can undo bolts/nuts torqued up to 120+ but I still use the breaker bar to lose the bolts before I use the gun
@thirtysixmx82347 жыл бұрын
Any chance of doing some more videos of the corsa C? Regardless keep up the work man
@theyjustwantyourmoney45393 жыл бұрын
I wanted to hear how much noise the compressor and the tools make
@SIMIKINGMOTO7 жыл бұрын
Nice tools! But in my workshop I have 50l air compressor end sometimes is small... :(
@FedeTheStunter6 жыл бұрын
i have some "Parkside" tools in my toolbox , good quality for the price , not the best obviously , but very good for the beginners
@AdammP7 жыл бұрын
good show mate, what psi was that compressor during the impact gun test? should do at least a set of wheel nuts :(
@Barthoization6 жыл бұрын
The video would be so much better without that noise called "music" . Had to watch the whole thing on mute
@1sonyzz6 жыл бұрын
puts metal drill bit for drilling wood, nice
@unnerbuxetruckler6 жыл бұрын
4:49 The Luftratsche I have too.
@wickedwiganer7 жыл бұрын
You'll need to be careful now with that impact socket gun that you don't round the nuts and bolts. Nice video, keep up the good work mate ✌️️
@TheBudgieCake7 жыл бұрын
Dont worry too much about the compressor or gun being 'man' enough for wheel lugs, if something is that tight that shocking it wont do anything its always best to use a bar and apply constant pressure, I work fulltime on cars and I got a 1997 Snapon gun with no balls but when im doing wheel nuts up I know that i'm not over tightening them so when I torque them they're all good
@brushrescue17015 жыл бұрын
Just bought this air compressor from Lidl pretty sure it said on the box or in the instructions that this compressor is not big enough to really run most Air tools other than the airjet the paint gun and the sander but that's all I want it for so it's an excellent purchase for me cheap to
@Sloaptablet6 жыл бұрын
Good job! Love you chanel
@tomcradd7 жыл бұрын
You tend to find that with air ratchets they spin quite slowly I have a snap on super duty one and it's about the same speed, as far as impact guns go I'm incredibly surprised it didn't undo those wheel bolts my advice if you going to buy another impact get a good quality 3/8 and just use adaptors the 1/2 are normally too big for most spaces, I have a blue point one in my travel box and that undoes wheel bolts no problem
@BMRStudio6 жыл бұрын
Send all to AvE :)
@tomallsopp19196 жыл бұрын
BMR Studio not a skookum choocher in sight
@1200kawa5 жыл бұрын
New air tools have storage grease in it. degrease them and lubricate with oil for airtool.
@vinceking78787 жыл бұрын
Some of those tools had quite a lot of power. Was their some kind of regulator on the compressor, if so did you adjust it.
@Jonathan-uo6ui6 жыл бұрын
Just a tip when taking of wheels first loosen the bolts when the car is sitting on the ground then raise it an completely unscrew thep
@petrunic16 жыл бұрын
impact wrench is ok, will do wheel bolts, but you have to get a wider hose, and set your compressor to 8 bar.
@CobraDominik6 жыл бұрын
This year 2018.02 Lidl start selling 50L compresor. Much better because of the size, more air. Just get one this month. Really good tool. Happy to have it :-)
@hyperion80086 жыл бұрын
The music ruins the video!
@pauli65706 жыл бұрын
hyperion8008 The video ruins the video......
@obierice47477 жыл бұрын
i had the same impact wrench.. really gutless, hardly opened any lug nuts i tried it on.. even with a decent air compressor
@lukasadikovicpolajzer67246 жыл бұрын
Ye saw this all in lidl i only picked up a wrench set
@ethanmcfenton30447 жыл бұрын
the range of tools from there and aldi are awesome. impact gun has yet to fail me. turn the torque dial to 4 and use the unregulated outlet on the compressor and power lol. is there a way I can email you or something?
@harrywilliamson336 жыл бұрын
Some one did a review but once the tank was full they turned it off. so the pressure went they said the tools were useless, but if the compressor was on whe they were working would show how good they were.
@rockyfish31157 жыл бұрын
I got there petrol jet wash it's pretty good only used it once, alot of it is built in China then kompernass and lidl put there name on it, good value and some of the stuff is very good
@astrazenica77835 жыл бұрын
I was tempted to do same lol
@falcon57513 жыл бұрын
Lol the parkside electrical impact wrench can actually handle the tyre's bolts fine
@johnnybhoyable7 жыл бұрын
Yay an upload
@airbrushingbynick60715 жыл бұрын
Just try fitting a 3/8 hose to the compressor. Ok it will charge a lot more but it will have to extra power to use the wrench n stuff.
@kiansworkshop6386 жыл бұрын
i have a question ? if you turn the compressor on does it just keep on building pressure or does it cut off ? and what is the the black knob between the two hose connections for ? please reply thanks
@JackDaniels-up5wn6 жыл бұрын
Just wanted to see how they’re as a brand I bought a cordless drill for my apprentice because he had no tools lol so I bought a few cheap tools and the drill to stop him using mine but my Bosch knocked the socks of it but my battery went flat so I had to use his I remember the guys on site taking the piss out of him every time he got it out although he was proud of it! Personally I wouldn’t buy them maybe if I had a office job and was a DIY’er. But I will say isn’t air tools somewhat a thing of the past? I mean I find most cordless tools far superior even to the point they’re becoming more adopted in workshops.
@ussul65246 жыл бұрын
Had spray gun (for primer) and the lid leaked all the time painting a fender. Could not seal it so return. Compressor good only for tire pressure :-) Other tools need pro air supply.
@stefanbrown81767 жыл бұрын
with parkside it's very hit and miss, the grinders are great the plug in ones are I mean
@gerry51346 жыл бұрын
Your dad's XS 250 Yamaha is in very good nick ! What was wrong with the compressor??
@johnodonnell20936 жыл бұрын
Buy a broken second hand air compressor with a large capacity and connect the 24 litre one to it. That's will give you a cheap massive air receiver, I'm currently using a 6 litre air compressor to fill a 150 litre tank and it works perfect once it's charged up.
@becomematrix6 жыл бұрын
Guess the impact wont have any effect since the tank is so small. The rest of the tools seem fairly okay.
@unnerbuxetruckler6 жыл бұрын
Hey .. I'm from the country of Lidl ... the things are not bad. Greetings from Germany Peter
@hanksgarage_7 жыл бұрын
good on your dad keeping that old mower around, they sure dont build them like that anymore
@arnoldmeulen5 жыл бұрын
You have to set the air pressure of the compressor to 6.8 bar if you use the Lidl impact screwdriver with a 10 meter long tube. a 50L tank is also recommended but the air pressure doesn't has to be too high because the tool will waste the extra air. When you have an 8 bar compressor and set it to the max your tool has to spill 1.2 bar but can't control it precisely what is a loss of pressure.
@harrytaylor89794 жыл бұрын
You need a bigger compressor to use the blaster and especially the paint sprayer
@Lloydscooter17 жыл бұрын
Got some ratcheting spanners from Lidl once, mechanisms always slip
@trialprice6 жыл бұрын
I have a good lot of lidl air tools ,The only problim i have change the conectors,as the ones i use are industrial .
@AbdulMalik-io1tf4 жыл бұрын
Nice job
@DJShadow19666 жыл бұрын
The air ratchet probably just needs the power screw adjusting, should have one on it somewhere
@4wdsome4445 жыл бұрын
They have sold tools for the last 10 years, it may not be the best stuff but you can work it just as hard as a the best than in 5 years time take it back and get another, they order one in even if they dont stock it anymore, seriously the best quality-service-price ratio
@barlow29765 жыл бұрын
I bought the £99 Erbauer set of air tools from Screwfix. They've been brilliant, and come in a really tough box, and are guaranteed for two years. Air hammer, 1/2" ratchet wrench, 1/2" impact wrench and blow gun, plus chisels ,extenders and lots of fittings, grinding wheels etc. I've bought different Erbauer stuff from SF, and it has all stood the test of time. A box of impact screw and nut bits for my cordless impact wrench has not suffered a single failure, and I reckon the Pozi 2 bit in the holder has driven 2000 + screws without failing- better than the kraut bits I used to use. My compressor is only a hobby 100L 2.5hp 10cfm machine, and with the (Erbauer) 20m 9mm hose I have to turn the pressure up to 105psi to give enough grunt at the other end to operate the ratchet and wrench at full power. Don't be put off by buying a cheap compressor, they're very useful tools, even if, like me, you're only removing a few stubborn nuts, and inflating tyres. Blow guns are invaluable too!
@nw80007 жыл бұрын
I bought all that last year and its all good stuff but the compressor is way underpowered for the impact tools :-(
@MoesKeckeEcke6 жыл бұрын
nw8000 the ratchet is utter trash, same goes for the paint gun only good for tractor and fence rust protection paint..
@sandydogy6 жыл бұрын
I bought the airsaw. Best use is cutting hole in cars plastic undertray. Oil change is easy then . small hole by drain plug
@harrymartin18375 жыл бұрын
What paint do you use for air compress what called
@theriggsworkshop86066 жыл бұрын
Great video , would have been great to actualllynhear the compressor to hear how noisy to is
@MacStrange5 жыл бұрын
Nice
@GarthGoldberg7 жыл бұрын
24l=6 gallon air compressor. You need one at least twice as big, and better three times, to run air tools like an impact wrench. I have an 11 gallon = 40 liters, and it's barely big enough for light duty air tool use.
@zedman4427 жыл бұрын
Looks like a bargain, but. 24l compressor probably isn't man enough for an impact wrench. The other tools seem to be good value though.
@vvillem96 жыл бұрын
True. But to be fair on the website all the larger tools state they are not compatible with the 24 liter Lidl one.
@lockerzFITTOME6 жыл бұрын
Well, you are correct, but I think it's enough for a person who needs it to change 4 tires on a car twice a year and some small things from time to time...
@driesforce6 жыл бұрын
You're right, the manual does say 50+ Liters but I mainly use it to tighten nuts on things like motorcycle clutches and for that it's a great tool on a 24L compressor. Just don't expect to do a full pit stop with it in a few seconds because a 24L compressor can't handle the required air volume. For single nuts though it's amazing.
@GeoffTLR6 жыл бұрын
I have the same compressor and impact. I found if I use an extn cable and a short 4ft of hose the impact works much better. Way too much oomph is lost in that long, small bore hose I guess.
@mrcaboosevg60896 жыл бұрын
The size doesn't really matter so long as the pressure is there, you'd just be waiting a lot
@matthias186 жыл бұрын
I have the needel gun and for tge money its pretty good for use around the home its enough
@ChazzCoombes5 жыл бұрын
the music reminds me of Ben Phillips old videos lol, anyone else think that or is it just me lol, nice tools tho
@dougmcquaid73887 жыл бұрын
Quality video
@user-ml2tp8no6m5 жыл бұрын
Cool
@alessiogatti28396 жыл бұрын
Amo il Lidl e il fai da te, spesso ci compro attrezzi e ne rimango soddisfatto.. ma un mese fa ho comprato la sabbiatrive Parkside, fa pena Ahahah
@peteramberley99526 жыл бұрын
Park side is not too bad quality iv bought some tools from lidls as spairs /2nd lot of tools for boat or work so its not the end of the world if they get nicked or lost . As i say qualoty is lacking but ok for back up .the days for aircomppresors i think are numbered now as there are soo many affordable battery devices are available which are quiet lighter "instant" and consume much less electricity
@reffter8137 жыл бұрын
Great video, +1 subscriber!
@jpegster645 жыл бұрын
why didnt you use the paint sprayer?
@milansobcak58866 жыл бұрын
I have bought lidl spray paint gun I use it once and didint finish the job the seals inside just melt ....