Lift Kit install on my 2019 CanAm Outlander Max XT 850!

[@beetlebeerc9943]

Gotta upload more

[@TeddysVentures]

Any Suggestions? I am still very new as a KZbin creator. I really would like to hit the 1000 subs and 4000 hours viewed mark.

[@EpicDestructionHD]

Great video! I was wondering where can I get that little storage box where the seat goes? Been searching everywhere but no luck

[@TeddysVentures]

Thank you! I appreciate your feedback and please consider giving the video a like and subscribing for future content. The storage box came with my Outlander Max and I believe you can order it from CanAm as an accessory. It has the Q-Link connection so it securely mounts right onto the racks on the bike. I hope this helps!

[@dashcam5398]

those bushing are $15.00 each in Canada and you need 4 and then add your sales tax that ends up being more expensive than the lift spacers, why not just add electrical tape around the bottom of the shock to take up the slack. There is no movement and it will center the spacer once in tight it will not move due to the spring pressure on it

[@TeddysVentures]

Thanks for watching and sharing your idea!

[@canamxmr4760]

So it won’t make it any taller than it would be say if I jacked it up?

[@TeddysVentures]

Thanks for watching. I gained about 2" more of ground clearance and firmed up the plushness. It was worth it for me! Definitely a little taller.

[@canamxmr4760]

@@TeddysVentures thanks for the reply. I put them on a little while ago. Gained maybe an inch in the front and 1.5 in rear. It’s definitely stiffer and took just about all the static sag out. I’ll find out tomorrow how the reduced down travel affects things. Had to move the preload from maxed to 50%.

[@TeddysVentures]

@@canamxmr4760 Same here. I adjusted the preload down to about 50%.

[@canamxmr4760]

@@TeddysVentures yeah that’s what I ended up with. I ride 2up and with an ice chest. So it definitely helped keep the bike higher up when loaded down. Thanks for the replies!

[@davidmanis3052]

Rubberdown Customs builds risers that are milled on bottom and top, remedying that issue....another positive, they're a bit beefier design.

[@TeddysVentures]

Thank you! I will check them out.

[@davidmanis3052]

@@TeddysVentures very welcome!! They said they race renegades with them installed and haven't had any issues. I bought them, they'll be here Monday ....2020 can am 850xt

[@TeddysVentures]

@@davidmanis3052 How do you like them so far?

[@jaimemacias5122]

Great video. Does this help with the softness of the suspension as well? My 570 has too much body roll, i feel i can get rid of the softness and add some clearance with the spacers

[@TeddysVentures]

Hey thanks for watching! Please consider liking the video and subscribing to my channel! My ground clearance improved and the ride stiffened up too. I keep the preload tensioner in the middle on my shocks now and it's perfect. Cheap mod and it works! Enjoy!

[@maneshgavit5912]

Price Kya hai

[@TeddysVentures]

Thanks for watching. I found them on Ebay for $20.00 for a set of 4.

[@lkrk10]

I need me a set of those. I wouldn't go bigger on tires, but that is just me.

[@TeddysVentures]

They work well so far. I might go with a set of 27" when the 26" oem tires eventually need to be replaced. The center of gravity is definitely higher now so I will not go to 28's. I think 12-13" of ground clearance should be sufficient as it is and I won't need to trim plastics, and will not overload axles or the tranny with heavier tires, etc.