Lightburn 201 Image Manipulation & Cropping

➡️ Click on Show More↙️for the LASER RAFFLE and other Links!
The Raffle you've all been waiting for! The LaserMATIC 20!
➡️ lahobbyguy.com/lasermatic20
Get a chance to win the King of the Diode Lasers!
The Roly Automation Facebook Group:
/ rolyofficial
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com/shop/thelouisi...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
The Laser I use most frequently, The Roly LaserMATIC 10: King of the Diode Lasers!
➡️ amzn.to/3oIzOzp
AVAILABLE NOW ON AMAZON!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutfiles.com/
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145045320
Check me out on Rumble! rumble.com/c/c-3325164
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikecloud.com/
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com/magnets
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com/4standoffs
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com/bedlegs
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
=======================================
THE MOST REASONABLE DIODE LASER COMPLETE PACKAGE AVAILABLE!
👉 This is a special VIEWER ONLY package deal!
🔗 lahobbyguy.com/package
Laser, Roller Accessory, Enclosure & Honeycomb Bed! $465!!
Take an ADDITIONAL 7% OFF with
Coupon Code: ➡️ HobbyGuy
=======================================
I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/lahobbyguy
=======================================
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com/lburn
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com/lb-keys
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroadcollection.com/...
[e-mail]
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwoods.com/
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/44TfKGdByI9o
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero

[@doninvermont2008]

Hi Rich, your videos are great! This one just saved me a ton of aggravation trying to adjust an image the way I wanted. I appreciate the hard work and effort you put into these - even though you make it seem so simple! Thanks again!

[@TheLouisianaHobbyGuy]

You're very welcome Don! I'm glad I could help!

[@rustyp21]

Good morning Rich. Another great video! I’m learning so much from you, and I appreciate you so much. Thanks for all you do for the community!

[@TheLouisianaHobbyGuy]

You are so welcome David! Thank you for watching! 👍

[@christopherdivirgilio9861]

Hi Rich - I'm brand new to Lightburn and could not be happier with your videos. I started out on your Lightburn 101 and subscribed straight away. Your pace and explanations are just brilliant. Keep up the great job, and Happy Holidays. Cheers!

[@TheLouisianaHobbyGuy]

*Awesome Christopher! Thank you!*

[@bonniemarquette2127]

EXACTLY WHAT I NEEDED! Thank you SO much for making this video! I'm new to Lightburn and so far I love it!

[@TheLouisianaHobbyGuy]

Glad it was helpful Bonnie!

[@tomcod428]

Being brand new to Lightburn, I find your videos super informative in a delivery made very easy to understand. Thank you for your efforts, very much appreciated.

[@TheLouisianaHobbyGuy]

You're very welcome Lew! Thanks for watching!

[@BunniesWillEatYou]

This is hands down one of the best tutorial videos I have seen for a long time. Absolutely saved my project! Thank you

[@TheLouisianaHobbyGuy]

Glad it helped Anna! 👍

[@DavidFernandez-gh2mu]

Sir. @The Louisiana Hobby Guy. The amount of info/knowledge you are able to impart in one short concise video is amazing. I learned more from you in this 8 minute video than in many 20some minute videos put out by Lightburn. I greatly appreciate it. you made a subscriber out of me. Also following on your forum. Thank you so much Rich and keep up the great work.

[@TheLouisianaHobbyGuy]

Wow, thank you David!

[@dwaynechrest52]

Thank you. Spent an hour trying to manually figure it out; you showed me in 5 min. Gracias !!

[@TheLouisianaHobbyGuy]

You're welcome Dwayne!

[@cw4608]

You have the gift of teaching. You also have a voice which is easy on the ears. I am enjoying your videos. Thanks!

[@TheLouisianaHobbyGuy]

Wow, thank you!

[@stephencozad9965]

Rich, It is Rare Now and days to Find someone like you. Willing to share Experience for the Good of the People. I am a Virgin when it come to lasers. I do Wood Turning and other Woodworking things. I have always been an Artist and have been frustrated with computer programs that will not do what I wanted or needed them to do. I find Lightburn Refreshing. They have added features I knew could be done. Thanks for making a Video on how to use it. I hate Reading User manuels. I will continue to Support You. I am also From Louisiana.

[@TheLouisianaHobbyGuy]

Thank you Stephen, and howdy neighbor!

[@nikkicork8815]

Many thanks for this, I was one of the people that said you could not crop in Lightburn, I know diffent now. So glad you were recommended to me

[@TheLouisianaHobbyGuy]

You're most welcome Nikki! I'm glad I could help and glad you're here! 👍

[@jf6720]

Every question I have, you already have a video explaining it! Thanks for your time and knowledge.

[@TheLouisianaHobbyGuy]

Glad to hear it! Thanks!

[@karenjean4025]

Thank you Rich.... I appreciate your time and effort showing us the capabilities on this software. You help make our hobby less stressful and a lot more fun!! :)

[@TheLouisianaHobbyGuy]

I appreciate that Karen!

[@vaughanza]

Excellent Rich, thanks again for taking the time to make the videos. After this , this is how i am going crop in Lightburn.

[@TheLouisianaHobbyGuy]

Awesome Vaughan! I'm glad you liked it!

[@caleberwin65]

Dude you’re so good at this stuff. Every video of yours blows my mind.

[@TheLouisianaHobbyGuy]

Awesome Caleb! Thanks!

[@graceland75]

Hey There Rich, because of you and all your videos, I broke down and purchased a second laser, the Ortur LM 2 Pro S2. Just received it today. Thank you for disproving the the bad comments, all it does is educates us newbies.

[@TheLouisianaHobbyGuy]

*Great to hear John!* I just bought the LM2 Pro V10, LF. I haven't ever disapproved a comment though.

[@johntheloft]

Hi Rich. New to LightBurn but not new to your channel. Been following since I brought a D1 Pro. You have a great talent for the old learners like me (84 years) it takes us that bit longer to grab it. Thanks for making it easier for me. (John UK)

[@TheLouisianaHobbyGuy]

Awesome, thank you John!

[@garylushman615]

Hi Rich love your video's. i have the Sculpfun S9 for about 2 months now have learned so much from you, keep up the great work

[@TheLouisianaHobbyGuy]

Thanks, will do Gary!

[@aztecwarrior1421]

I admit, i am one of those guys who dont know what he is doing, but thanks to you i am feeling alot better about lightburn.

[@TheLouisianaHobbyGuy]

Awesome! 👍 Thanks for watching!

[@dontbeasheeple5883]

Another great video as usual Rich. Thanks for sharing your vast wealth of information. I bet I'm your first subscriber from Algeria. I'm an Aussie but work in the gas fields over here, I'm trying to learn as much about Lightburn as I can before I get home and use my laser for the first time.

[@TheLouisianaHobbyGuy]

Awesome, thank you!

[@veronicarainey9850]

Thank you for making LightBurn user friendly. I have not received my laser engraver yet but am excited to get started now you have made Lightburn less intimidating with your excellent videos.

[@TheLouisianaHobbyGuy]

Hope you enjoy it Veronica!

[@hanksuffoletto6877]

Thanks Rich another great video. Have a great day.

[@TheLouisianaHobbyGuy]

Thank you too Hank!

[@7mcandes]

YOU!!!! Thanks so much!!! I watched another video and they went about it a whole different way. A much more complicated way. Thanks again for making lightburn easy to understand.

[@TheLouisianaHobbyGuy]

You're welcome Colleen! Thanks for watching!

[@mikebuzz5784]

Thanks for all the videos. You should have millions of subs. Your videos are so easy to follow.

[@TheLouisianaHobbyGuy]

Wow, thanks Mike! I just started KZbin a few months ago... maybe in the future!

[@SouthbayCreations]

Great video Rich! Thanks for sharing!

[@TheLouisianaHobbyGuy]

You bet! Thanks for the feedback!

[@sherrymiracle6193]

love love love your videos. they are very easy to follow for newbies like me. thank you

[@TheLouisianaHobbyGuy]

You are so welcome Sherry!

[@the369truth]

Awesome tutorial. Thanks Rich - master of Lightburn.

[@TheLouisianaHobbyGuy]

My pleasure! *Master I'm not!* But I am willing to learn and take you along for the ride! 🤪

[@jerryderr8043]

Thank you for making these videos. I'm new to this and it's all Greek but these videos will get me clear. Can't thank you enough!

[@TheLouisianaHobbyGuy]

You're very welcome Jerry; thanks for watching! 👍

[@lulurossi547]

Meu deus moço muito obrigada por esse vídeo!!! Eu tava louca sem saber como resolver isso, adiantou muito meu trabalho ❤️

[@TheLouisianaHobbyGuy]

Fico feliz que tenha ajudado você! Obrigado por assistir!

[@coralwegener6861]

So thankful that you share your expertise with others!

[@TheLouisianaHobbyGuy]

Thanks so much!

[@coralwegener6861]

@@TheLouisianaHobbyGuy Hi Rich! You're videos have been so helpful (Lightburn is new to me), but I'm stuck on what to do after you place an image inside the text. How would I engrave the letters, and then cut them out? There is only one layer and no options for line, etc. I hope I explained my problem properly. Thank you for your time!

[@bullseyemarketplacethreeri3194]

Great job. When I purchased this I had questions answered all the way from china recommending your videos for teaching. I really enjoyed your calm professional communication skills. If your not already you would make an awesome educator. Ill be watching more shortly, so keep them coming, because this software is like taking a four credit hour class in college.

[@TheLouisianaHobbyGuy]

Wow! Thank you so much! I appreciate the comments!

[@alsaffarstudios]

Great tutorial, thanks for sharing this video with us 🙏🏼

[@TheLouisianaHobbyGuy]

My pleasure 😊

[@IanFlyinGremlinRCNZ]

Another awesome video Rich, I will be using that at some stage. Looking forward to the next video

[@TheLouisianaHobbyGuy]

*Glad you enjoy it Ian!*

[@liskaljet]

What a great futures, i'm a newby with the laser and lightburn zo learning a lot from your video's. Keep going with this. Greetings from the Netherlands, Ron

[@TheLouisianaHobbyGuy]

*Awesome, thank you!*

[@pamelaross7408]

Thank you so much! This was simple and easy to follow.

[@TheLouisianaHobbyGuy]

*You're welcome Pamela!* Thank you so much for watching!

[@rcjarvis]

Man I love your pace...great vid once again !

[@TheLouisianaHobbyGuy]

Glad you enjoy it!

[@rsnsol2490]

great video, I love these short, to the point ones thankyou

[@TheLouisianaHobbyGuy]

Glad you like them!

[@ericam1002]

Hi Rich, the video is great, I enjoy watching the tutorials you share, thank you very much.

[@TheLouisianaHobbyGuy]

Thank you so much Eric! I really appreciate it! 👍

[@kennybrooks9357]

Thanks for the “no frills” videos! I don’t even have lightburn yet but feel comfortable already. I have an xtool d1 pro on order and I use Vcarve Pro with my CNC router

[@TheLouisianaHobbyGuy]

Glad you like them Kenny!

[@kurtwm2010]

Extremely helpful to beginners like me. Now I wish I could remember to contains of all your videos for later refreshing. I actually started to save the URLS of your videos with a comment of their contents. I can refer to it later when I need to and have already many times.... like this one

[@TheLouisianaHobbyGuy]

Glad you like them Kurt! I have them in play lists if you go to the main channel page.

[@jimcochran4755]

Thank you for sharing these videos. They are very helpful.

[@TheLouisianaHobbyGuy]

You're very welcome Jim!

[@dicasdefuteb0l]

You got a new subscriber! Thank you for your super informative videos 🙏🏼

[@TheLouisianaHobbyGuy]

My pleasure! Thanks for watching!

[@krisknowlton5935]

Rich, I don't think you could make a bad LightBurn video if you tried. You should have a million subscribers before long. Much success to you my friend. I always learn something from you.

[@TheLouisianaHobbyGuy]

That's really kind of you Kris, thank you! 😎

[@rjlatheart]

Great Job! Lightburn is fun as you have shared with us once agan Thanks

[@TheLouisianaHobbyGuy]

Thanks again Rich! Yeah, the possibilities are endless!

[@chipwoodin9060]

Great video. Keep it going. I learn a lot. Thank you

[@TheLouisianaHobbyGuy]

Thanks, will do! Just finishing one now on complex vectors in seconds! Stick around! 😊

[@tomtimmons2228]

Worked like a charm. Thank you kind sir.

[@TheLouisianaHobbyGuy]

You're welcome Tom! Thanks for watching! 👍

[@stingray8858]

Great tutorial. I'm going to test this today.

[@TheLouisianaHobbyGuy]

Awesome! Have fun!

[@ammerudgrenda]

Thanks for making this effort. This is great!

[@TheLouisianaHobbyGuy]

Glad you enjoyed it!

[@DienhartDotCom]

Thanks Rich. Great stuff.

[@TheLouisianaHobbyGuy]

My pleasure David! Glad you enjoyed it!

[@graceland75]

I was at the misconception that you had to use a 3rd party software in order to do this and many other things, thanks Rich, it does make things much easier working and learning one software and seeing the beautiful net results.

[@TheLouisianaHobbyGuy]

Windows, Mac or Linux & Lightburn is all you need for an engraving business.

[@popschannel4956]

Just what I was looking for. Thanks.

[@TheLouisianaHobbyGuy]

Glad I could help Pops!

[@markkevin7245]

Thanks again I watched this over a year ago and it used the crop… but for some reason I couldn’t remember how to do the text crop…. Also don’t use my burner that much but really love when I do and your tips tutorials are second to none… and you can revisit them as I’m doing.. I think the more you use you generally pick it up but your instructions show the best way.

[@TheLouisianaHobbyGuy]

Wow! Thank you so much! I appreciate the comments Mark!

[@markkevin7245]

@@TheLouisianaHobbyGuy thank you the reason I got a NEJE laser was because of your videos… you don’t make people feel like a idiot you just help.

[@FHGWoodworking]

Great video I'm just getting into this but have a cnc background. You have earned my subscription. Cheers

[@TheLouisianaHobbyGuy]

Welcome aboard! Thanks for the Sub Nick!

[@garthhowe297]

That technique is quite powerful. I would never have thought that Lightburn could do this.

[@TheLouisianaHobbyGuy]

Lightburn can do almost anything as far as laser creation is concerned Garth.

[@jimlaird6950]

Learning lots watching your video's. I'm new to laser burning so find them very informative

[@TheLouisianaHobbyGuy]

Welcome aboard!

[@karendunkley1094]

Like this your very positive. Explaining a way that someone can understand. I hate asking questions on fb group so many are just condescending with response. I'm gonna watch your videos hopefully will save me. I'm so close to selling laser and giving up

[@TheLouisianaHobbyGuy]

*Thank you kindly Karen!* Sorry for the late reply, KZbin didn't notify me of this comment! 🤪

[@fredsmachinewerks4811]

Very good video Rich. I have been going through all your video"s. Man you got this software down to a fine art. I was going get Corel Draw But from what you have done with Lightburn WOW. Cheers Fred

[@TheLouisianaHobbyGuy]

Still learning Fred! *We're all learning together!* Stay tuned... I'm working on another video regarding video processing and why you don't need *any* other software!

[@rassski1]

want to say thank you so much for teaching me how to us Boolean assistant, it has help me save so much time, again thank you.

[@TheLouisianaHobbyGuy]

My pleasure!

[@dale2512]

Thank you for your videos, you give me hope I make this thing work!

[@TheLouisianaHobbyGuy]

You can do it!

[@norm5785]

Thank you for sharing and dispelling those naysayers. Everyone stay safe, warm, happy and healthy. From Henrico County Virginia.

[@TheLouisianaHobbyGuy]

Thanks Norm!

[@suesshirtshopandmore6754]

Another Great video! Thanks Again!

[@TheLouisianaHobbyGuy]

Glad you enjoyed it!

[@scottcunningham7543]

You are awesome this helped me so much. Thank you so much.

[@TheLouisianaHobbyGuy]

Glad it helped Scott!

[@kevo60420]

Being new to the lasering world and reading about lightburn, i found it odd it didnt have a crop feature. Thanks for this video. This is going to help a lot.

[@TheLouisianaHobbyGuy]

You're very welcome Kev! Thanks for watching! 👍

[@fredwienbarg5051]

Another great one! Thanks!!!

[@TheLouisianaHobbyGuy]

Glad you enjoyed it!

[@d.i.l.l.i.g.a.f]

Thank You! Thank You!, I have been tearing my hair out, thinking there must be a way to crop an image. And wow is it simple when you know how lol.

[@TheLouisianaHobbyGuy]

You are so welcome! Everything is easy once you know how!

[@Proven88]

Good stuff, very helpful

[@TheLouisianaHobbyGuy]

Glad it was helpful!

[@roystheboy]

These videos will help everyone keep them coming

[@TheLouisianaHobbyGuy]

Awesome! 👍 Thanks for watching!

[@heathroper4988]

Very helpful, thank you.

[@TheLouisianaHobbyGuy]

Glad it was helpful!

[@MikeWaldt]

Thank you again Rich :)

[@TheLouisianaHobbyGuy]

My pleasure!

[@FranktheDachshund]

Great stuff, thank you!

[@TheLouisianaHobbyGuy]

Glad it was helpful!

[@jeremyangel8877]

Enjoy your Videos, Thanks

[@TheLouisianaHobbyGuy]

Glad you like them Jeremy!

[@bdwoodworking6411]

Once again, amazing video. Clear, concise and easy to follow along. Also love the special hidden features that you teach. Love it! Thank you

[@TheLouisianaHobbyGuy]

Thanks so much!

[@margaretfricke3629]

Hi Rich, I hope you'll be reading this very soon. I tried this method to crop the image and yes it worked! I was so incredibly elated I can't even tell you to think that I was going to get a beautifully detailed image that I could engraved instead of having to take it through Trace, adjust it then try to get a good image. Well, the problem is that when I tried to transfer it into the laser, the image would not come up with any type of successful image that could be successfully engraved. I was near tears. I was looking forward to having a super crisp and cleans image engraved. To no avail. I am engraving ceramic tiles. The normal method is to use CERMARK spray, then engraved at 360speed and 65 power. I tried a wide range of speed and power settings. The image either showed up on the laser screen as very spotty, I even changed the dpi. I really need your help as soon as possible. Thank you, I do agree that your method is wonderful and I'm sure there's an answer. It's something I'm sure I am just not seeing correctly. please help me. Thanks, Margaret I'll keep looking for your response.

[@TheLouisianaHobbyGuy]

Not much I can help with in a text Margaret, but I can tell you it's probably due to the image mode you're using. Try changing the image mode and testing other modes, like Dither, Stucki, Jarvis and Grayscale.

[@halsteadlaserengraving372]

Well done!

[@TheLouisianaHobbyGuy]

Thanks so much!

[@RobSandstromDesigns]

Very well done. Still need to learn much more on image manipulation to get a clean burned image on wood. Kind of illusive right now. Will look to see what other videos you have.

[@TheLouisianaHobbyGuy]

Cool, thanks for watching!

[@DanielH]

thank you, you saved me ;)

[@TheLouisianaHobbyGuy]

Thank you so much Daniel! I really appreciate it! 👍

[@solar_baby1392]

Amazing. thank you

[@TheLouisianaHobbyGuy]

Glad you liked it!

[@user-sc1qf6sq3z]

Watching your tutorials and man theyre good- you get right to the point and explain it in basic terms. One question: On Adjust Image- it shows two pictures. Is the one on the left the original and the one on the right, the one you're modifying? Select OK after that and it keeps the mods?

[@TheLouisianaHobbyGuy]

That is correct, but you have to have to save each edit if you want to reuse it in the future. Click the little floppy disc icon to save the current settings.

[@DS-ng2kj]

Thank you so much!!!!

[@TheLouisianaHobbyGuy]

You're welcome!

[@DOUBLEDEFENSE]

Good video good explanation

[@TheLouisianaHobbyGuy]

Glad you liked it!

[@BrandonHatch-ut3wu]

Got a follower here, thank you for the not dramatic intro! lol.

[@TheLouisianaHobbyGuy]

Thanks for the sub!

[@leskinney4690]

Wish I had this last weekend lol 😆 but thanks 🙏 Got it now

[@TheLouisianaHobbyGuy]

Maybe next time Les 🤪

[@merrillalbury8214]

Simple and great.

[@TheLouisianaHobbyGuy]

Glad you like it Merrill!

[@michaelalix4943]

Great straight to the topic without the goofy music as a distraction 👍

[@TheLouisianaHobbyGuy]

I find lots of folks dislike music in YT videos.

[@markkevin7245]

Very cool!

[@TheLouisianaHobbyGuy]

Thanks so much!

[@JGphins]

Thank you!

[@TheLouisianaHobbyGuy]

You're welcome!

[@WhatIsKenDoing]

Thank you very much

[@TheLouisianaHobbyGuy]

Thank you for watching!

[@SUNRISE-ADVENTURES]

Really enjoy your work!! Concise and to the point!! Did something change, i do not have that option?

[@TheLouisianaHobbyGuy]

Which option is that? This was V 0.9.24 of Lightburn. As of today, the latest is 1.0.06.

[@sunriseadventures5459]

@@TheLouisianaHobbyGuy I figured it out. i did not have the cut line closed!! LOL THANKS FOR THE HELP!! Just Subscribed... ROCK ON!!

[@FlitterGuy]

Thanks!

[@TheLouisianaHobbyGuy]

Wow! Thank you so much Greg! I truly appreciate the support! 👍

[@chiliman321]

Thank you sir

[@TheLouisianaHobbyGuy]

You're welcome!

[@shirazparacha2024]

Do u have a video on how to do photos in lightburn . Your explanation is really good and I would love to learn about photo engraving through lightburn

[@TheLouisianaHobbyGuy]

Not yet, but it is on my list! Stay tuned Shiraz!

[@deanborgmann4743]

Hi Rich, thank you for all the great videos that you put out. I am trying to put a logo on an image that I burned but the logo does not show up very well over the already burned image. Is there a way to block out a shape in the image so it does not burn that shape and I can burn the logo in that area Kind of a reverse masking.? I hope I explained it good enough.

[@TheLouisianaHobbyGuy]

It can be done but it would take a lot of testing to get the right settings. It's too hard for me to answer this in a text.

[@mfharper44]

Loving your videos. Can you curve text in Lightburn?

[@TheLouisianaHobbyGuy]

Yes Mark, select the item and look for the little blue dot handle. That's the curve handle.

[@johnstock5833]

My word the LightBurn folks make a simple task complicated

[@TheLouisianaHobbyGuy]

Actually they make it very easy compared to any other program John.

[@johnstock5833]

@@TheLouisianaHobbyGuy Glad you've had that experience!

[@lonniedupont]

Good one

[@TheLouisianaHobbyGuy]

Thanks!

[@daviddionne8296]

Thank you... for my sanity....!

[@TheLouisianaHobbyGuy]

You're welcome David 😊

[@S.4.4.W]

thank you

[@TheLouisianaHobbyGuy]

Thanks for watching!

[@vincentlekei1969]

Hay wows cool. I have a question. Can I use the circle frame tool a frame it and engrave the image ?

[@TheLouisianaHobbyGuy]

Yes of course Vince.

[@vincentlekei1969]

@@TheLouisianaHobbyGuy wow well okay awesome thanks 😊

[@debbiew6370]

Hi there I don’t have the apply a mask to image on my drip down menu ! I’m New to light burn any ideas ?your videos are great btw

[@TheLouisianaHobbyGuy]

Follow along with the video. If you don't select the layers the way I demonstrate, it won't work. Order of operations is important.

[@SWATC0P]

Rich does the image your masking have to be a particular type of image? I tried it with a graphic that I had already created into a .lbrn and apply mask to image is grayed out. BTW Thank you so much for all you do.

[@TheLouisianaHobbyGuy]

No, it works on all images. Make sure the mask is above the image on the cuts and layers tab.