How to make a color changing Starbucks cup

[@kellyguzmanromero9383]

I thought epoxy on these cups was something that is not suppose to be done? Doesn't epoxy need to be applied on double walled cups and not plastic?

[@Leddex_vr]

No, you put ( chunky). glitter , glycerine and water in between the two walls thru a hole in the bottom. Makes a snow globe. VYour right about plastic w/ epoxy. Hope this helps answer your question.

[@kristenkirkland7505]

Love Solar color dust! The shop it’s actually right down the street from my house. Wolf is a super cool dude.

[@Leddex_vr]

How are you bonding the epoxy on? I find the epoxy just sits on the surface of plastic. I work with epoxy a lot. I’m not understanding how your getting it to adhere to plastic. Also, if I put too much of anything including pigment it will disturb the structure of the epoxy. Is that cup flexible at all in the slightest ? How does it not crack the epoxy? Do you put these in the dishwasher? Hot water?? these?

[@reynadelgado28]

So nice! I love it!! I like to try but a lot of people say the is toxic, the you can’t do it on a regular cup has to be a double insulated cup

[@brianamartinez1687]

Thank you so much for sharing your knowledge and making these tutorials!! Just ordered some glitters! I appreciate you!

[@dianaromero5782]

Hi @lilyrisecraftroom! I am sorry for this question, maybe you have had answer it before! The Starbucks cups or logos, do you get them with the logo already? Or do you buy or make the logo? Where can I get the logo separately please! Thank you

[@Beastlybeauty17]

Hello, how do you know what size vinyl you need for each cup?? I want to start making some cups but I have no clue on the size. Thank you!!!

[@Mychannel-so8kf]

This may be a silly question, but could I use a hair dryer instead of a heat gun?

[@aaliyaht36]

I have a bunch of color change cups that no longer work 😞 I wanna try something like this, to make them pop again. Any advice on how to keep the paint vibrant and keep them from not working anymore? Does light damage the paint?

[@brookerobles7236]

See I was very intimidated to try this but now I think I’m ready. Thank you !

[@leticiacallejas8573]

I loved your video all very well explained, just a question? I've heard that epoxy is bad if we put it in plastic cups! How true is that!!

[@erickaagredano3463]

Thank you! I’ve been using Atlanta chemical engineering and they used to be so good and the last 3 times I ordered the pigments have been terrible!

[@brianamartinez1687]

Do you happen to have any suggestions on how to “fix” a fish eye or bald spots on a cup? Of course, when making this one I had a couple bare areas and nothing stuck to the Starbucks logo at all. I did use the same measurements you recommended for the epoxy.

[@joannejunorreid1264]

Thanks for sharing. I always wondered how it could be done!

[@raquelchavarria3725]

super lindos te quedaron, excelente video.

[@mrs.c1776]

I love it 🥰! Would you know if it would work with the drops as well? Instead of powder

[@vickisetzer2156]

This was a great video! Do you epoxy all your Starbucks cups that you have put vinyl on?

[@dianasoriano5162]

Hello. Love your cups. I made my first glitter cup with epoxy. I’ve let it cure for weeks now. How do I get rid of the strong epoxy smell?

[@lupitasaucedo7222]

Can you use cristalac instead epoxy?

[@ivelizsantos3606]

Is the epoxy safe to use on plastic? I thought it was supposed to be double Wall.

[@erikagarza5868]

Why not apply glitter with first epoxy application?? By the way beautiful work

[@myprettyvault1527]

Could I do this in layers?? In 3-4 inch increments of color?

[@vanessagallegos648]

Hi sorry did you say 10ml part A&B mixed together to a total of 20ml?

[@stephanien1228]

Thank you so much for sharing and being so helpful with everything. I am new to crafty and epoxy. I’m sorry to ask you this silly question. In between epoxy layers do we leave the cup spinning in tuner for the 24 hours? 🤭 I try a cup but I think epoxy it’s pealing off the cup. I don’t really know what I did wrong.

[@ariusmiller7954]

I am using this dust for a snow globe tumbler . what’s the best mixture with this dust ?

[@tesorosglamourymas2559]

Thank you so much. I was looking at your ombré glitter cup tutorial and noticed that for this one you don’t do the part where you sand the first epoxy layer. Are you no longer doing that step? I’m new to cup making with epoxy and would love your input. Thank you so much.

[@beatrizqueenayala49erstill97]

Does it necessarily have to be vinyl to cover the Starbucks logo or can I can use any kind of stickers?

[@xxrebelrockerxx]

how do I get the decals used to temporarily cover my Starbucks logo while I make this?

[@LeLétheeartizan]

What do you refer to as Part A and Part B,are those two different types of epoxy or no?

[@rhiannon_4255]

when you buy epoxy resin it should have two bottles marked "A" and "B" which you need to mix equal parts of to activate the resin to harden :)

[@RedSeaCustomz]

Any suggestions on how to price these for sale??

[@michelleg429]

This video was great! Can you use the color change dust in a snow globe tumbler? If so, can you do a video?

[@LilyRoseCraftroom]

Hi. Yes will make a video soon😉

[@mariaquintero6035]

Wow do you leave the spinner thing on all the time? For all those hours?

[@kandybish6260]

Can you use any double wall tumblers instead of starbucks.

[@LilyRoseCraftroom]

Yes of course!😉

[@quitzianieves1168]

Thanks for sharing! Do you wear a safety mask while doing this? If so what do safety mask do you use?

[@LilyRoseCraftroom]

YES! I use a 3m Respirator mask with organic filters. I have links in the description of my mask and the filters.

[@suzannebeddoes7262]

Hi hun enjoying watching your great videos please where do you buy your Starbucks cups I can’t seem to get them

[@karlab6561]

Thank you so much for the video very helpful. Question- can I apply a vinyl sticker after the glitter is set or do I apply another layer of epoxy wait 4-6 hours and then apply sticker?

[@LilyRoseCraftroom]

Apply another layer of epoxy. You need a smooth surface to apply your vinyl or else it'll be bumpy. 😉👍🏻

[@MrJOHN3321]

I have a question. When you say 48-72 hours till cured does that mean leave it spinning 😵‍💫 or after it dries leave it on the side ? Thanks

[@LilyRoseCraftroom]

No. When is dry to the touch. Just put it aside.

[@annamonicaarriaga6559]

By chance do you put a care card in your cups. Some ideas for these cups what I should put 🤔

[@YessiLifestyle]

The cup turner tour using is not the same one as the link on your description. Do you recommend it and do you still have that one ?

[@luperivera9865]

Thank you for sharing and being so helpful!!!

[@lindalopez6174]

Can you make a color changing double wall acrylic tumbler video?

[@thenativenurse4u]

Can you use any apoxy and what do you sell your cups for.?

[@katc9675]

What kind of glitter do you use for your cups? Love you video 👌🥰

[@elliescreations3913]

Thanks so much for sharing 😍 the cup looks amazing! I have a question something that happens to me often and I don’t know what I’m doing wrong do you ever get the epoxy lifting from the top rim? Every time I seal the cup with epoxy and once it’s fully dry I try the lid on the cup I get like an air bubble or it lifts idk what I’m doing wrong or if I’m putting to much epoxy on the top..I hope I make sense 😭😩

[@santajanellegarcia524]

Omg! Ty ty ty sooooo much. For sharing. Where can I order the color change dust at? Please Lmk thx 😉

[@deniise.ferreira]

thank you so much for sharing ! you don’t have to sand the glitter on these ? or how do you keep the chunky glitter down ?

[@soepikk6389]

Absolutely amazing, thank you so very much for sharing with us it is greatly appreciated.

[@veronicarodrigues2019]

Beautiful cups but your not supposed to epoxy them you can squeeze the cup or drop them and the epoxy will crack off

[@FaerieAmira]

What would you use in its place? I wana do this for next years guft giving

[@lizcantu4232]

Can I use any type of glitter? Or what do you suggest

[@LilyRoseCraftroom]

I sell high quality Polyester glitter on my website LilyRoseCraftroom.com

[@MARISSEVLOG]

Where do you buy cheaper Starbucks Cups?

[@LilyRoseCraftroom]

Cheapest way is to get them at Starbucks. Third party sellers up the price.

[@littleurbanaquaponics2336]

Thank you so much for this tutorial. When you were mixing both colors I was thinking to myself how brave you are. I would be afraid it would set, but seriously thank you for the tutorial.

[@mmacias226]

Alumilites Amazing Clear Cast doesnt set too fast. It gives you time to work with it.

[@raisinggents]

This is freaking awesome! Thanks for making this step by step! 🤩

[@arcticprowl971]

Can you use a paintbrush instead of your hand

[@Shadingoftheheart]

The epoxy would likely ruin the bristles of a paint brush. You can use a silicone brush though, like they sell for applying makeup 😊

[@natileecosine1294]

Can you do this on the regular tumblers 💞

[@areliflores3928]

hi new subscriber here !!! is it possible to mix this with the vegetable glyserin to make a snow globe cup?

[@christyloo]

Where is the best place to purchase these cups. I have two that I bought on Amazon, so I’m going to use those to practice!

[@SandraLopez-go6ds]

Hi this is so cool, do you know if it will it also work with Brite tone?

[@caitlinmcdaniel5816]

what glitter did you use on the cups?

[@AlejandraMartinez-rg6mf]

Está hermoso tu trabajo

[@amandasanchez8037]

Is this the sticker vinyl ?

[@thenativenurse4u]

How much do you sell those cups completed?

[@Shakeitupcreationsmia]

That is so stinking cool. Thank you for the tutorial

[@jvl8485]

These are so pretty...but I thought putting epoxy on those cups were not a good idea cause they can crack and mess up.....have you ever had a problem

[@Creationsbyxrissy]

I’ve heard a similar thing but because of the chemical reaction of the plastic and the epoxy. That it’s dangerous

[@ravenpumkinking9570]

Do you have an alternative place to purchase the thermal changing powder? The website is sold out?

[@mval1216]

Hi! Have you used the thermal dust on double insulated tumblers?

[@lilianagomez1053]

Love the colors!! Love your work!!

[@cassandramiyashiro5990]

I thought you couldn’t put epoxy on these kinds of cups because it’s not double pain is that true. I love it though great idea..

[@jennifermassey8911]

Thank you for this tutorial, love it!! Can you tell me how many ounces or grams are the bags of the solar color dust? Thank you

[@vanesasandoval5773]

I just ordered some, they are 10 grams.

[@lorifitzpatrick5583]

So cool, I love your videos!!

[@KirstyReeve.]

Where canni buy plain cups form in England please

[@cradillo20]

Thank you for sharing! Your cups are very beautiful! ❤️

[@araceliaten126]

Hi! I watch your videos all the time taking notes lol haven't worked up the nerve to actually try it. I do have a question do you leave the cup turning for 4-6 hours or place on a plate to finish drying? Thanks

[@stephanien1228]

Wondering the same thing

[@Shadingoftheheart]

Keep it spinning, if not spinning the epoxy will drip off

[@serenadarling4100]

Hello, I was wondering if I can do this on hot cups?

[@LilyRoseCraftroom]

I wouldn't recommend it. When the cup gets hot it weakens the epoxy.

[@ginaguadian8562]

Thanks for sharing!! Love all your videos

[@kiarajames6365]

Hey thank you I just got my order today

[@Wendy-fx3zn]

Absolutely beautiful! Great video!

[@Wendy-fx3zn]

Also, ABSOLUTELY SUBBED!! ♥️💙💗💘 P.S, you’re gorgeous 🥰

[@isabelmendez2886]

I love your work!!! Thanks for this video as I’ve been epoxing cold cups for a while now and bought those pigments because of you a year ago but was to scared to try bc it reminded me of mica powders and those go on streaky watching you epoxy this was amazing so smooth no streaks not sure if it applies the smoother then mica powder or you are a goddess😍 but also I have a question why not add decals on the third layer instead of 4th? With 20ml shouldn’t it be enough for the chunky glitter or am I wrong? Thanks again and thanks for the huge inspiration

[@LilyRoseCraftroom]

Hi thanks for the support! Sorry for the confusion. I dont remember what i said lol Yes put the decals after the 3rd then seal it in with a 4th layer. 😉

[@saial1456]

I am a newbie here I have been told that you cant epoxy if its not a double walled is this doubled wall

[@LilyRoseCraftroom]

Please read the intro.

[@leaalvarez9804]

Would solar drops do the same as the solar dust?

[@LilyRoseCraftroom]

You'd probably have to use alot of drops. And it would probably affect the curing of the epoxy. Powder is always a better additive.

[@claudiabustamante8013]

Thanks for this video I think i have ask like a million times 🤦‍♀️ haha but I have a question when adding the glitter do you wait a while before you do asking because when I do this effect glitter goes all over the place thanks.

[@mmacias226]

If you'd like you can wait about 15 min to sprinkles your glitter so it doesnt move around.

[@jasmincruz3554]

Totally love your videos! Always so helpful. Thank you!

[@cupsbyjulie]

I love this cup and want to make one but I cant find any cold activated pigment powder in the UK 😪and solorcolordust dont ship her at the moment, 😭

[@LeLétheeartizan]

*here

[@Janeth7813]

Can you use thr color changing glitter for dubble wall ones like as snowglob kind

[@tamecalaprade7855]

Your videos are amazing along with your cups!

[@cv2562]

New subbie!!!! Love this tutorial...thank u for sharing😁💖

[@BeautySheIs]

I have a question ?? Do we have to use the powders with epoxy or can I also use them with my brite tone ?!

[@miryamdelatorre3431]

Wondering the same thing 😍

[@tearapetersen1013]

Same!

[@ashleighamber3964]

Thank you so much for making this video! 🙌🏼

[@virylopez26]

Great video! Thanks for sharing

[@shizzle7642]

Little advanced for my ability but so cute!!

[@Kristina_tafolla]

Would the color change also work on stainless steel or just plastic cups?

[@bkck567811]

I have uv color change on stainless. It changes with the uv rays and works wonderfully.

[@daliciabarrera3646]

Hey do you ship out

[@ruthandrade9728]

Hola Lily, este es mi primer vídeo que observo y me parece que tienes un excelente contenido !!!! Me encanta como explicas todo !!! Yo soy nueva en este proyecto :) tengo la cricut maker y apenas estoy empezando y lo estoy tomando como un hobby y me gusta mucho aunque aveces me confundo mucho lol Muchas gracias aprendí muchísimo contigo!!! Dios te siga usando para muchas personas como yo, un abrazo !

[@pilylopez2787]

Thank you sooo much share!! ☺️☺️

[@lesasimmons7631]

Well darn any other suggestions on where to get the color changing powders? The link is not working. Thank you.

[@LilyRoseCraftroom]

I just updated the link it's now working 😉

[@TheSmithFamily_1]

Thanks so much! I have learned so much from your videos! Appreciate you! Thank you!

[@janetfigueroa6083]

love your videos ! can you do a tutorial for chunky glitter on a cold cup ?? 🤗🤗🥺🥺

[@LilyRoseCraftroom]

Yes. that's actually my next one! :)

[@vanessajessie3791]

Yessss, I second this request lol

[@janetfigueroa6083]

@@LilyRoseCraftroom yay lol cant wait ! i struggle with chunky glitter cups

[@rosemarykufalk387]

Could you use these thermal powders in a snow globe style tumbler?

[@LilyRoseCraftroom]

Yes 😉

[@angelaneucere5746]

I was wondering do u sell these also if so how much I love them

[@sierraramos4162]

Beautiful!! Thank you for sharing. Love these 💕🙌

[@simmybunz]

New subscriber! Absolutely loved this video!

[@LilyRoseCraftroom]

Thanks for subscribing!🥰

[@oliviamartinez5550]

About how many cups can you make with a single bag or color changing dust?

[@LilyRoseCraftroom]

Good question. I'm not quite sure. But you can make a few cups from 1 bag.