Liquid Stands MS1111 Keyboard Workstation Assembly Video

[@paulsherstobitoff5215]

Great stand!! Highly recommended. Thanks for the video.

[@liquidstands]

We appreciate the kind words, thanks for the support!

[@Feldspar__]

I have one of these that I use for a Korg D1. It's the most stable stand I've used, even on casters. Just ordered a second to use outside my studio.

[@liquidstands]

Glad to hear you're enjoying the stand! We can't deny that our Portable Keyboard Workstation is one of the best in the market.

[@BillyShears76]

thank you, dude!🍻

[@BradenNelson28]

Thanks for the great video! Does the MS1105 Tabletop allow 2nd tier pieces to be attached as well? Or can you only have one or the other?

[@liquidstands]

Yes, it does. You can put the MS105 Tabletop on the highest arms and use the lower (outside) arms to attach a 2nd tier so you can use both at the same time on here. If you plan to use (2) 2nd tiers on the unit, you will NOT be able to use our MS1105 since it will cover the backside of the top beams. Hope this helps!

[@BradenNelson28]

Thank you so much for the reply!

[@x0d-live]

I recently picked up an older Mackie Onyx 24.4 mixer and haven't found the ideal desk for it, but this seems like it might be just what I'm looking for. It's just a few inches wider than I need, but should be fine. If the width was adjustable and could still handle the weight capacity, this would be perfect.

[@liquidstands]

If you need a stand that is less wide, we have the MS1080 or MS1078 Z Stands (same design but the MS1080 includes wheels). These stands are rated for 250lbs also and the height and width can both be adjusted.

[@NoCoverCharge]

Update .. I put mine together in about 8 minutes ..was easy very stable and killer .. My only suggestion is that you get some kind of non skid rubber tape to put on rails where keyboard sits .. my Yamaha mods+7 has a plastic body and is super lite so slides around a bit … but got some tape and put it on problem solved ..highly recommend the stand it’s Solid .. got 2nd tier coming so I’ll update once that’s installed

[@liquidstands]

We're on it already! We heard this feedback and our next order will have EVA pads to fully cover the top arms. Reach out to us and ask for Mike and I can hook you up with some free ones.

[@NoCoverCharge]

Just ordered one it says you can add 2nd tier I sure hope so

[@liquidstands]

You absolutely can. You can add 1 or 2 2nd tiers to this actually. If you ordered one, our contact info is in the manual so just reach out with any questions via phone, text, email or on here...or FB or IG or Reddit....we're everywhere and available all the time 😉

[@SynthMan65]

I found the lighting in the video too dark to see any real detail if i were using only this video to assemble my ms1111. Here's a tip i found when installing my casters: Lock the wheel by engaging the brake, then screw the caster on hand tight or until the inner portion of the caster mount starts to spin with your turns. You'll get the perfect tightness without the use of the supplied wrench which is pretty useless for tightening the casters. Once each caster is installed, unlock each wheel for proper usage.

[@liquidstands]

Thanks for your feedback!

[@Kittyintheraiyn]

Thank you for the advice.

[@Kittyintheraiyn]

You completely skipped over the casters, which is the only reason I came to check the video.

[@liquidstands]

Thanks for the feedback, I will make sure the casters are shown in the next video.

[@claudelefebvre5560]

To bad looks like you dont have the option not to have the weels on !!!

[@liquidstands]

Thank you for your feedback! The wheels are included to enhance portability and make the stand easy to move around. Unfortunately, the option to remove the wheels is not available at this time. We'll definitely take your suggestion into consideration for future designs!

[@OMGWTFLOLSMH]

You shouldn't shoot a black item in front of a black background. Can't see any of the detail.

[@liquidstands]

Thank you for your feedback! We appreciate your observation and understand how a black item against a black background might make it harder to see the details clearly. We'll consider this for future photos to ensure the product's features are more visible. You can also check the details of our Keyboard Workstation here: www.liquidstands.com/pages/ms1111-microsite