Liteville 301 Bike Porn Custom Enduro Action

[@stevepodraza6363]

I just upgraded to 27.5 x 2.8 dhf and 26 x 2.8 DHRII! Loving it so far! Please post more vids of your 301! 🤘🏻👍🏻

[@jodama]

This combo sounds good but for me the 2x4" version should work better, because of the weight!

[@markusnussi]

Geiles Bike, super gefahren, tolles Video 👍🏻

[@ludwiglindner4317]

Geiles Bike / Video! Einzig die "Enduro-Bereifung" fehlt mir noch ;)

[@jodama]

Ludwig Lindner Danke dir! Die. nobby nics sind n guter Kompromiss aus Gewicht,Traktion und Stabilität.

[@ludwiglindner4317]

jodama25 Wenn du irgendwie die Möglichkeit hast vorne auf "Magic Marry" zu wechseln (oder vergleichbares ) um das zu testen, versprech ich dir dass du nicht mehr zurückwillst auf "vorne Nobby Nic" ;)

[@Nilssports]

Sehr geiles Bike und Video!!

[@_bmx_ccg822]

Geiles Bike

[@monyvert]

mega cool

[@Tearstank]

Very daring to drill a hole through the seat tube where it connects to the bottom bracket, I would not recoommed it. This is a place where a lot of forces combine. A round hole multiplies the forces in the material with 3x pedining on loading directions. Hope he does not get a stress fracture in the frame there. Besides it looks like he drilled several holes in the downtbe to guide the cables. In any case it looks good but.... If you want to have all externally pulled cables then go for a Nikolai bike instead.

[@jodama]

Thanks Tearstank for your comment. I could understand your doubts, but in this case I drilled only one hole at the bottom of the seat tube. Exactly this position and the diameter is recommended from Liteville. After almost 6.000km of hard enduro and bikepark stress, there is no fracture or weakness at all! Greetings jodama

[@peterwalzer8163]

Awesome Bike. Which screws did you use. The blue and the red one elox screws. Thanks.

[@jodama]

Thanks man! I used normal metric, industrial screws, blue anodized in some differend shapes and lengths. And i changed the red chainring screws to blue ones. And they are M8,5x5,5mm and from the german brand tune. greetings Jodama

[@trebledc]

Need some job to save for this.

[@stevepodraza6363]

How is your chain line ? My jumps down 1 cog from 42 cog

[@jodama]

Hey, i have no problems with my chainline. Sometimes when i'm spinning the crank backwards, the chain jumps down 1 or 2 gears. But not in the normal use. greetings Jodama

[@AlexeiPavlov]

you did not want to get 27+ version?

[@jodama]

Alex Pavlov no, weight!

[@AlexeiPavlov]

jodama25 it's only little heavier if you go tubeless with carbon rims it be same weight. I ride xxl 29" frame it's heavy AF comparing to yours

[@stevepodraza6363]

You running scaled sizing?

[@jodama]

Steve Podraza yes, 27,5" front and 26" rear.

[@AlexeiPavlov]

how does that pedal uphill?

[@jodama]

no problems with this Setup by the way. With the Pike dpa you can reduce the travel of the fork for very steep climbing.